JCB TRACKED EXCAVATOR JS 260 LC

Size: px
Start display at page:

Download "JCB TRACKED EXCAVATOR JS 260 LC"

Transcription

1 MAX. OPERATING WEIGHT NET ENGINE POWER 589 lbs (2635 kg) 16 hp (12 kw) E I H K J F M G L C D A B STATIC DIMENSIONS Dimensions in ft-in (mm) Dipper lengths 6ft 6in (2.m) 8ft in (2.44m) 1ft 2in (3.9m) 11ft 7in (3.53m) A Track length on ground 12-7 (384) Dimensions in ft-in (mm) B Undercarriage overall length 15-3 (464) E Transport length with Monoboom 33- (183) 33- (16) 32-8 (996) 32-1 (11) C Track gauge 8-6 (259) F Transport height with Monoboom 1-5 (3173) 1-7 (323) 1- (35) 1-7 (322) D Width over tracks (24in (6mm) trackshoes) 1-6 (319) D Width over tracks (28in (7mm) trackshoes) 1-9 (329) Dimensions in ft-in (mm) D Width over tracks (32in (8mm) trackshoes) 11-1 (339) G Counterweight clearance 3-8 (1125) D Width over tracks (36in (9mm) trackshoes) 11-5 (349) H Tailswing radius 9-1 (3) I Width of superstructure 8-2 (25) J Height over cab 9-1 (298) K Height over grabrail 1- (359) L Ground clearance 1-7 (486) M Track height 3-1 (94)

2 ENGINE Model Isuzu BB-6BGITRB-6 EPA Tier II emissions compliant. Type Water cooled, 4-stroke, 6-cylinder in-line, direct injection, turbocharged diesel. Nett power (ISO 346-INF) 16hp (12kW) at 215rpm. Piston Displacement 396 cu.in. (6.494 litres). Air Filtration Dry element with secondary safety element and in-cab warning indicator. Cooling Water cooled via large capacity radiator. Starting system 24 volt 6hp (4.5kW). Batteries 2 x 12 volt Heavy duty. Alternator 24 volt 4 amp. Refuelling pump Electric type. SWING SYSTEM Swing motor Axial piston type. Swing brake Hydraulic braking plus automatic spring applied disc type parking brake. Final drive Planetary reduction. Swing speed 1.6 rpm. Swing gear Large diameter, internally toothed fully sealed grease bath lubricated. Swing lock Multi position switchable brake. UNDERCARRIAGE Carriage LC-Long Carriage. Construction Fully welded, X frame type with central bellyguarding. and sloping sidemembers with dirt relief holes under top rollers. Recovery point Front and rear. Track type Sealed and lubricated. Track shoe options 24in (6mm), 28in (7mm), 32in (8mm), 35in (9mm). Upper & lower rollers Heat treated, sealed and lubricated. Track adjustment Grease cylinder type. Track idler Sealed and lubricated, with spring cushioned recoil. HYDRAULIC SYSTEM A variable flow load sensing system with flow on demand, variable power output and servo operated, multi-function open center control. Pumps Main pumps Maximum flow Servo pump Maximum flow 2 variable displacement axial piston type. 2 x 59.7 US GPM (2 x 226 L/min). Gear type. 5.7 US GPM (21.5 L/min). Control valve A combined four and five spool control valve with auxiliary service spool as standard. When required twin pump flow is combined to boom, dipper and bucket services for greater speed and efficiency. Relief valve settings Boom/Arm/Bucket With power boost Swing circuit Travel circuit Pilot control 4975lbf/sq.in (343 bar) 541lbf/sq.in (373 bar) 4192lbf/sq.in (289 bar) 4975lbf/sq.in (343 bar) 569lbf/sq.in (4 bar) Hydraulic cylinders Double acting type, with bolt-up end caps and hardened steel bearing bushing. End cushioning is fitted as standard on boom, dipper and bucket cylinders. Filtration The hydraulic components are protected by the highest standard of filtration to ensure long hydraulic fluid and component life. In tank 15 micron, suction strainer. Main return line 1 micron, fibreform element. Plexus bypass line 1.5 micron, paper element. Pilot line 1 micron, paper element. Hydraulic hammer return 1 micron, reinforced microform element. Cooling Worldwide cooling is provided via a full return line air blast cooler as part of a single face cooling pack, in conjunction with the engine water cooler. TRACK DRIVE No. of track guides No. of lower rollers No. of upper rollers No. of track shoes LC 2 per side 9 per side 2 per side 51 per side Type Travel motors Final drive Service brake Park brake Gradeability Travel speed Tractive effort Fully hydrostatic, three speed with autoshift. Variable displacement axial piston type, fully guarded within undercarriage frame. Planetary reduction, bolt-on sprockets. Hydraulic counter balance valve to prevent overspeeding on gradients. Disc type, spring applied, automatic hydraulic release. 7% (35 deg) continuous. High 3.4 mph (5.6 km/h). Mid 2. mph (3.3 km/h). Low 1.4 mph (2.3 km/h). 298kgf, 4439lbf (197.1kN).

3 EXCAVATOR END Monoboom available along with a choice of dipper lengths to suit the requirements of reach, dig-depth, loadover height, tearouts and site versatility. Reserve strength is built into the fully welded structures for hydraulic hammer and other arduous operations. Fabricated bucket tipping links are provided with a choice of lift points. Strong, durable construction, large cross sections and multi plate fabrications to withstand high stress applications. The 19ft 2in (5.85m) boom is designed to ensure the optimum digging envelope when matched with the three dipper lengths. Low maintenance bronze alloy bushings with graphite plugs are fitted to boom base and boom to dipper pivots resulting in 1 hour greasing intervals at these points. CAB Excellent digging, loading and positioning visibility results from the careful design of front, side and roof lights. All windows are tinted to improve in cab conditions. Fully opening front windshield is very smooth to operate and as the lower windshield is stored within the top windshield frame it makes complete front windshield opening easy, fast and convenient. Fresh air ventilation available from opening door window, opening slot in front windshield and fully opening front windshield. Parallelogram wiper for upper windshield ensuring good wiped area for maximum visibility. Wiper motor is fitted in the left hand side of the sun roof so as not to affect bucket visibility when loading. Optional lower windshield wiper available. Fresh air ventilation and heater with windshield defroster. Infinitely variable blower speed, temperature and recirculation control. Air conditioning or climate control incorporating chilled cool box available as option. Fully adjustable deluxe suspension seat with arm rest adjustment and backrest recline. Radio cassette player with digital tuner fitted into the roof lining for maximum protection. Conveniently placed radio mute button incorporated into lower console. 12v power point and mobile phone holder built into the right hand console. Courtesy light can be operated from ground level and is illuminated for five minutes or until switched off improving operator access at night. Cab mounted roller blind protects operator from suns glare through front or top windshields. AMS ADVANCED MANAGEMENT SYSTEM Four selectable working modes link the operators control movements with the engine and hydraulic systems to maximize productivity and efficiency. A (Auto) Up to 1% engine power and 1% flow. Gives variable power and speed depending on the operator s input, matching the demand for output and efficiency to the job. Power boost is automatically activated in this mode should hard conditions be encountered. Auto idle cuts in after a period of inactivity (between 5 and 3 seconds as set by the operator) E (Economy) 8% engine power. 95% of hydraulic flow maximizes economy while maintaining excellent output. P (Precision) 55% engine power. 9% of hydraulic flow for fine control of grading operations. L (Lifting) 55% engine power. 63% of hydraulic flow with permanent power boost for maximum lifting power and control. The Auto mode allows the AMS processor to select the optimum operational performance to match the demands of the job while the three alternative modes give precise matching of application when specific tasks are undertaken. The adjustable position monitor mounted on the front right hand pillar of the cab gives the operator a constant read out of mode, tracking range, operating temperature and a host of other information, while retaining excellent visibility of the monitor and the job being carried out. The required flow for hammer applications can be set and stored in the AMS memory and is automatically activated whenever the hammer pedal is depressed. A maintenance indicator warns of imminent service needs, and all servicing and basic checks can be carried out using only the in cab display. Excavator Tracks Auxiliary Control isolation Engine speed Engine stop Horn CONTROLS All servo lever operated to ISO control pattern, independently adjustable to the seat. Dual pattern control switch, in the fuse box, makes it convenient to switch from ISO to SAE control pattern. Individually servo operated by foot pedal or hand lever. Speed selection via joystick button. Via servo operated foot pedal. Via gate lock lever at cab entrance or panel switch. Dial type throttle control plus servo lever mounted one-touch idle control or separate selectable auto-idle with adjustable time delay using AMS. Ignition key operated and separate shut-down button. Operated via servo lever mounted button.

4 SERVICE CAPACITIES US gal (Liters) Fuel tank 9.6 (343) Engine coolant 7.1 (26.8) Engine oil 5.7 (21.5) Swing reduction gear 1.6 (6.) Track reduction gear (each side) 1.2 (4.7) Hydraulic system 63.7 (241) Hydraulic tank 31.7 (12) WEIGHTS AND GROUND BEARING PRESSURES Figures include 1.5cu.yd (1.14cu.m) bucket, operator and full fuel tank. JS26 Mono Undercarriage and shoe width in (mm) Weight/Ground bearing pressure 28 (7) 56857lb/6.4lb/sq.in. (2579kg/.45 kg/sq.cm) 32 (8) 5745lb/6.1lb/sq.in. (266kg/.43 kg/sq.cm) GENERAL PURPOSE EXCAVATOR BUCKETS All buckets are JCB Esco type fully welded steel, with sealed, hardened steel pivot pins and replaceable wear parts. Max Width Capacity (SAE heaped) Weight 24in. (6mm).79cu.yd. (.6cu.m) 1528lb (693kg) 3in. (75mm) 1.5cu.yd. (.8cu.m) 169lb (766kg) 36in. (9mm) 1.32cu.yd. (1.1cu.m) 1851lb (839kg) 42in. (16mm) 1.6cu.yd. (1.22cu.m) 217lb (915kg) 48in. (12mm) 1.87cu.yd. (1.43cu.m) 2139lb (97kg) 54 in. (125mm) 2.15 cu.yd. (1.64cu.m) 2332lb (158kg) STANDARD / OPTIONAL EQUIPMENT Standard Equipment: Engine fan guard; Cold start pre-heat; Auto engine warm up; Double element air cleaner; Electric refuelling pump; Heavy duty alternator; Electrics isolator; Heavy duty batteries; Cab & engine soundproofing; Cab heater & window defroster; Tinted glass; Radio & cassette player; Interior light; Coat hook; Cigarette lighter; Ashtray; Operator s storage box; Removable floormat; Windshield washer/wiper; Plug-in power socket; Automatic power boost; Auto-idle; One-touch engine speed control; Hydraulic cushion control; Boom/swing priority switch; Plexus hydraulic oil filtration; HSP pressure test points; Auxiliary pipework mounting brackets; Work lights boom & mainframe mounted; Undercarriage belly guarding; Upper structure under covers; Swing system cover; Twin track guides; External mirrors; Handrail & non slip walk ways; Quick connect engine oil drain pipe; Front windshield blind; Quick connect fuel tank drain pipe; Hinged engine under cover; Lap seat belt; ISO/SAE control pattern change over; Air conditioning. Optional Equipment: Hose burst check valves & overload warning system; Tipping link mounted lift points; General purpose buckets; Ditch/grading buckets; Quickhitch buckets; Hydraulic hammers; Auxiliary pipework (full and low flow); Cab mounted & rear work lights; Rotating beacon; Rain guard; Biodegradeable oil; Air suspension seat with heated pad and lumbar support adjustment; Lower windshield wiper.

5 WORKING RANGE Dimensions in ft-in (m) 19ft 2in (5.85m) Monoboom Dipper length ft-in (m) 6-6 (2.) 8- (2.44) 1-2 (3.9) 11-7 (3.53) A Maximum digging reach ft-in (m) 3-2 (9.19) 31-7 (9.64) 33-8 (1.27) 35-1 (1.69) B Maximum digging reach (on ground) ft-in (m) 29-6 (8.99) 31- (9.45) 32-1 (1.1) 34-6 (1.52) C Maximum digging depth ft-in (m) 18-9 (5.72) 2-2 (6.14) 22-3 (6.79) 23-8 (7.23) D Maximum digging height ft-in (m) 29- (8.84) 3-3 (9.23) 31-7 (9.62) 32-4 (9.85) E Maximum dumping height ft-in (m) 2-2 (6.15) 21-3 (6.47) 22-5 (6.83) 23-2 (7.5) F Maximum vertical wall cut depth ft-in (m) 14-9 (4.51) 17-7 (5.35) 2-4 (6.21) 21-1 (6.67) G Minimum swing radius ft-in (m) 13-2 (4.2) 13-1 (3.99) 12-8 (3.87) 12-9 (3.88) Bucket rotation deg Max. Dipper tearout (ISO 615) lbf (kgf) 4285 (18272) (15484) 272 (12248) (11198) Max. Bucket tearout (ISO 615) lbf (kgf) (19574) (19574) (19574) (19574) D E A B J S 2 6 J S2 6 J S2 6 G 32-6 (1) 29-3 (9) 26- (8) 22-9 (7) 19-6 (6) 16-3 (5) 13- (4) 9-9 (3) 6-6 (2) 3-3 (1) ft-in (m) C F 36-1 (11) 32-6 (1) 29-3 (9) 26- (8) 22-9 (7) 19-6 (6) 16-3 (5) 13- (4) 9-9 (3) 6-6 (2) 3-3 (1) ft-in (m)

6 LIFT CAPACITIES Dipper length: 6ft 7in (2.1m), 19ft 2in (5.85m) Monoboom, Trackshoes: 32in (8mm), No bucket. Reach 4ft 11in (1.5m) 9ft 1in (3m) 14ft 9in (4.5m) 19ft 8in (6m) 24ft 7in (7.5m) 29ft 6in (9m) Max. Reach Max. Reach Load Point Ht. lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) ft-in (mm) 19.8ft (6.m) (631)* (631)* (621)* (621)* 22-1 (6947) 14.9ft (4.5m) 1832 (831)* 1832 (831)* (687)* (687)* (623)* (564) (621)* 1237 (546) 25-1 (7655) 9.1ft (3.m) (125)* (125)* 172 (772)* (759) (654)* 1217 (552) (63)* 1123 (5) 26-4 (821) 4.11ft (1.5m) 2575 (1168)* (186) (849)* 1694 (73) 1519 (689)* (539) (646)* 1692 (485) 26-7 (893) m (128)* (163) (889)* (712) (74)* (53) (666)* 1957 (497) 25-1 (7878) 4.11ft ( 1.5m) (182)* (182)* 2553 (1158)* (163) (874)* (77) (686)* (544) 24-1 (7351) 9.1ft ( 3.m) (1313)* (1313)* (129)* (129)* 172 (772)* (718) (698)* (656) 21-1 (6434) 14.9ft ( 4.5m) (74)* (74)* (661)* (661)* 16-1 (496) LIFT CAPACITIES Dipper length: 8ft in (2.43m), 19ft 2in (5.85m) Monoboom, Trackshoes: 32in (8mm), No bucket. JS26 LC JS26 LC Reach 4ft 11in (1.5m) 9ft 1in (3m) 14ft 9in (4.5m) 19ft 8in (6m) 24ft 7in (7.5m) 29ft 6in (9m) Max. Reach Max. Reach Load Point Ht. lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) ft-in (mm) 19.8ft (6.m) (584)* (584)* (574)* (574) 24-7 (7489) 14.9ft (4.5m) 1422 (645)* 1422 (645)* (587)* (566) (568)* 1935 (496) 26-8 (8149) 9.1ft (3.m) (959)* (959)* (734)* (734)* 1381 (626)* (551) (583)* 197 (458) (8494) 4.11ft (1.5m) 2489 (1129)* 243 (19) 1878 (82)* 1672 (729) 1475 (667)* (535) (6)* 9811 (445) 28-1 (8561) m (1198)* (158) (873)* (77) (693)* (524) 1363 (617)* 19 (454) 27-4 (8358) 4.11ft ( 1.5m) 2123 (963)* 2123 (963)* 2594 (1175)* (152) 1929 (875)* 1541 (699) (679)* (521) (635)* 1825 (491) 25-1 (7864) 9.1ft ( 3.m) 3168 (1437)* 3168 (1437)* (172)* (162) (84)* (74) (647)* (576) 23- (716) 14.9ft ( 4.5m) (1113)* (1113)* (842)* (842)* (63)* (63)* 18-6 (5652) Lift capacity front and rear. Lift capacity full circle. Notes: 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer.

7 LIFT CAPACITIES Dipper length: 1ft 11in (3.9m), 19ft 2in (5.85m) Monoboom, Trackshoes: 32in (8mm), No bucket. Reach 4ft 11in (1.5m) 9ft 1in (3m) 14ft 9in (4.5m) 19ft 8in (6m) 24ft 7in (7.5m) 29ft 6in (9m) Max. Reach Max. Reach Load Point Ht. lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) ft-in (mm) 19.8ft (6.m) (511)* (511)* 766 (345)* 766 (345)* 27- (8224) 14.9ft (4.5m) 1289 (581)* 1289 (581)* (537)* (537)* 7496 (34)* 7496 (34)* 29- (8828) 9.1ft (3.m) (1355)* (1355)* 194 (862)* 194 (862)* (677)* (677)* (584)* (556) 959 (435)* 9281 (421) 765 (347)* 765 (347)* 3- (9147) 4.11ft (1.5m) (156)* (156)* 1718 (776)* (736) 1421 (636)* (537) 1167 (52)* 915 (413) 869 (366)* 869 (366)* 3-2 (929) m 1628 (727)* 1628 (727)* (117)* (164) (848)* (79) (675)* 1158 (522) 9215 (418)* 8973 (47) 8796 (399)* 8796 (399)* 29-7 (922) 4.11ft ( 1.5m) 1232 (558)* 1232 (558)* (982)* (982)* (119)* 2382 (147) (874)* 153 (694) 1512 (685)* (514) 175 (457)* 9546 (433) 28-1 (8566) 9.1ft ( 3.m) (169)* (169)* (1576)* (1576)* (1127)* (15) (839)* 153 (694) 1421 (636)* (517) (564)* 1869 (493) 25-7 (7796) 14.9ft ( 4.5m) (1322)* (1322)* (961)* (961)* (71)* (71)* 1314 (596)* 1314 (596) 21-7 (66) LIFT CAPACITIES Dipper length: 11ft 6in (3.52m), 19ft 2in (5.85m) Monoboom, Trackshoes: 32in (8mm), No bucket. JS26 LC JS26 LC Reach 4ft 11in (1.5m) 9ft 1in (3m) 14ft 9in (4.5m) 19ft 8in (6m) 24ft 7in (7.5m) 29ft 6in (9m) Max. Reach Max. Reach Load Point Ht. lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) lb (kg) ft-in (mm) 24.7ft (7.5m) 939 (41)* 939 (41)* 799 (322)* 799 (322)* 25-7 (7789) 19.8ft (6.m) 134 (469)* 134 (469)* 6724 (35)* 6724 (35)* 28-6 (8693) 14.9ft (4.5m) 1123 (5)* 1123 (5)* 8951 (46)* 8951 (46)* 6614 (3)* 6614 (3)* 3-5 (9267) 9.1ft (3.m) 1735 (787)* 1735 (787)* (632)* (632)* (551)* (551)* (56)* 9259 (42)* 6746 (36)* 6746 (36)* 31-5 (957) 4.11ft (1.5m) 181 (821)* 181 (821)* (993)* (993)* (737)* (737)* 1344 (68)* (536) (533)* 939 (41) 777 (321)* 777 (321)* 31-7 (963) m (634)* (634)* (1133)* (164) 1878 (82)* (76) 1444 (655)* 1142 (518) 1217 (552)* 8841 (41) 7672 (348)* 7672 (348)* 31- (9451) 4.11ft ( 1.5m) (539)* (539)* 2176 (956)* 2176 (956)* 2615 (118)* 2296 (139) (861)* (688) (677)* (57) 8995 (48)* 8774 (398) 8664 (393)* 8664 (393) 29-7 (918) 9.1ft ( 3.m) 2988 (952)* 2988 (952)* (1433)* (1433)* (1144)* (135) (846)* 1558 (683) (653)* (56) 1472 (475)* 9833 (446) 27-2 (829) 14.9ft ( 4.5m) 3191 (1447)* 3191 (1447)* 3154 (1429)* 3154 (1429)* (114)* (114)* (749)* (693) (568)* 1213 (549) 23-6 (7178) 19.8ft ( 6.m) (715)* (715)* (538)* (538)* (5444) Lift capacity front and rear. Lift capacity full circle. Notes: 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values. 2. Lifting capacities are based on ISO 1567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity. 3. Lift capacities assume that the machine is on firm, level ground. 4. Lift capacities may be limited by local regulations. Please refer to your dealer.

8 A GLOBAL COMMITMENT TO QUALITY JCB s total commitment to its products and customers has helped it grow from a one-man business into the World s 5th largest manufacturer of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheel loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders and tractors. By making constant and massive investments in the latest production technology, the JCB factories have become some of the most advanced in the World. By leading the field in innovative research and design, extensive testing and stringent quality control, JCB machines have become renowned all over the world for performance, value and reliability. And with a global sales and service network of over 4 distributors and agents, the company exports over 7% of its production to all five continents. Through setting the standards by which others are judged, JCB has become one of Britain s most impressive success stories. HELPING YOU GET THE JOB DONE! JCB Headquarters Savannah, 2 Bamford Blvd., Pooler, GA Tel: Fax: JCB reserves the right to change design, materials and/or specifications without notice. Specifications are applicable to units sold in the United States and Canada. The JCB logo is a registered trademark of J C Bamford Excavators Ltd M-1/6/4

JCB TRACKED EXCAVATOR JZ140 JZ140 STATIC DIMENSIONS lb (15961 kg) (36930 lb (16751 kg) WITH OPTIONAL BLADE)

JCB TRACKED EXCAVATOR JZ140 JZ140 STATIC DIMENSIONS lb (15961 kg) (36930 lb (16751 kg) WITH OPTIONAL BLADE) MAX. OPERATING WEIGHT NETT ENGINE POWER 35190 lb (15961 kg) (36930 lb (16751 kg) WITH OPTIONAL BLADE) 97.6 hp (72.8 kw) K I C D L M J F J Z 1 4 0 E A B H G STATIC DIMENSIONS Dimensions in ft-in (millimeter)

More information

JCB TRACKED EXCAVATOR JS 330 LC TIER III

JCB TRACKED EXCAVATOR JS 330 LC TIER III JCB TRACKED EXCAVATOR JS LC TIER III MAX. OPERATING WEIGHT 77 lb (2 kg) NET ENGINE POWER 271 hp (22kW) I E H M N J F L S J TAB G K C D A B STATIC DIMENSIONS Dimensions in feet/inches (millimeters) LC A

More information

TRACKED EXCAVATOR JS145HD

TRACKED EXCAVATOR JS145HD MAX. OPERATING WEIGHT: 18011 kg ENGINE POWER: 81 kw (109 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres A Track length on ground 3090 B Undercarriage overall length 3940 C Track

More information

JCB TRACKED EXCAVATOR JS130 LC

JCB TRACKED EXCAVATOR JS130 LC MAX. OPERATING WEIGHT NETT ENGINE POWER 15200 kg 70 kw (94 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 2780 (9-1) B Undercarriage overall

More information

JCB TRACKED EXCAVATOR - Tier 4i JS 330 LC

JCB TRACKED EXCAVATOR - Tier 4i JS 330 LC MAX OPERATING WEIGHT: 73,37 lb (33,2 kg) NET ENGINE POWER: 29 hp (200 kw) E I H M N J F K L G C A STATIC DIMENSIONS Dimensions in ft-in (mm) LC A Track Length on Ground 12- (39) B Undercarriage Overall

More information

JCB TRACKED EXCAVATOR JS160 NLC/LC

JCB TRACKED EXCAVATOR JS160 NLC/LC MAX. OPERATING WEIGHT NETT ENGINE POWER 17925 kg 81 kw (109 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) NLC LC A Track length on ground 3090 (10-2) 3090 (10-2) B Undercarriage

More information

JCB TRACKED EXCAVATOR JS 210 LC

JCB TRACKED EXCAVATOR JS 210 LC MAX. OPERATING WEIGHT NETT ENGINE POWER 21675 kg 102 kw E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LC A Track length on ground 3660 (12-0) B Undercarriage overall length

More information

TRACKED EXCAVATOR JZ140HD

TRACKED EXCAVATOR JZ140HD J Z1 TRACKED EXCAVATOR JZ140HD MAX. OPERATING WEIGHT: 17409 kg ENGINE POWER: 73 kw (98 hp) E I H K J F JZ140 HD 4 0HD L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on

More information

JCB TRACKED EXCAVATOR JS 460LC

JCB TRACKED EXCAVATOR JS 460LC MAX. OPERATING WEIGHT: NET ENGINE POWER: 103220lb (46820kg) 305hp (228kW) E I H J F K M L C D A B STATIC DIMENSIONS ft-in (m) ft-in (m) A Track length on ground 14-5 (4.40) G Counterweight clearance 4-6

More information

JCB TRACKED EXCAVATOR JS220 LONG REACH

JCB TRACKED EXCAVATOR JS220 LONG REACH MAX. OPERATING WEIGHT NETT ENGINE POWER 22100 kg 102 kw (138 hp) E L D G F M H N C I K A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground 3660 (12-0) B Undercarriage overall

More information

JCB TRACKED EXCAVATOR JS 200 NC/SC/LC

JCB TRACKED EXCAVATOR JS 200 NC/SC/LC MAX. OPERATING WEIGHT NETT ENGINE POWER 21190 kg (46716 lb) 128 kw (172 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) NC SC LC A Track length on ground 3370 (11-1) 3370

More information

JCB TRACKED EXCAVATOR JS 260 LONG REACH TIER III

JCB TRACKED EXCAVATOR JS 260 LONG REACH TIER III MAX. OPERATING WEIGHT: 3558 lbs (28890 kg) NET ENGINE POWER: 197 hp (147 kw E L D G F M H N J S2 0LR C I K A B STATIC DIMENSIONS Dimensions in ft-in (millimetres) LR A Track length on ground 12-7 (3840)

More information

JCB TRACKED EXCAVATOR JS 235 HD

JCB TRACKED EXCAVATOR JS 235 HD MAX. OPERATING WEIGHT NETT ENGINE POWER 24222 kg (53400 lb) 128 kw (172 hp) E I H K J F L M G C D B A STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 3420 (11-3) B Undercarriage

More information

JCB TRACKED EXCAVATOR JZ140

JCB TRACKED EXCAVATOR JZ140 MAX. OPERATING WEIGHT NETT ENGINE POWER 15961 kg (16751 kg WITH STABILISING BLADE) 72.8 kw (97.6 hp) E I H K J F JZ140 J Z 1 4 0 L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track

More information

TRACKED EXCAVATOR JS220 NC/SC/LC

TRACKED EXCAVATOR JS220 NC/SC/LC MAX. OPERATING WEIGHT: 22550 kg (49714 lb) NETT ENGINE POWER: 128 kw (172 hp) E I H K J F L M G C D A B STATIC DIMENSIONS JS220 NC/SC/LC MONOBOOM Dimensions in millimetres (ft-in) NC SC LC A Track length

More information

TRACKED EXCAVATOR JS115

TRACKED EXCAVATOR JS115 1 5 TRACKED EXCAVATOR JS115 MAX. OPERATING WEIGHT: 12962 kg (28576 lb) MAX. ENGINE POWER: 73 kw (98 hp) E I H K J F J S1 L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length

More information

STATIC DIMENSIONS JS145LC MONOBOOM

STATIC DIMENSIONS JS145LC MONOBOOM MAX OPERATING WEIGHT: 34,430 lb (15,617 kg) NET ENGINE POWER: 109 hp (81 kw) E I H K J F L M G C D A B STATIC DIMENSIONS JS145LC MONOBOOM Dimensions in ft-in (millimeters) A Track Length on Ground 9-5

More information

JCB TRACKED EXCAVATOR JS160 NLC/LC

JCB TRACKED EXCAVATOR JS160 NLC/LC MAX. OPERATING WEIGHT NETT ENGINE POWER 17925 kg (39518 lb) 92 kw (123 hp) E I H K J F L M G C D A B STATIC DIMENSIONS JS160 NLC/LC MONOBOOM Dimensions in millimetres (ft-in) NLC LC A Track length on ground

More information

JCB TRACKED EXCAVATOR JS 460L

JCB TRACKED EXCAVATOR JS 460L MAX. OPERATING WEIGHT: NETT ENGINE POWER: 46820kg (103220lb) 228kW (305hp) E I H K J F M G L C D A B STATIC DIMENSIONS m (ft-in) A Track length on ground 4.40 (14-14) B Undercarriage overall length 5.38

More information

TRACKED EXCAVATOR JS370 LONG REACH. Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.

TRACKED EXCAVATOR JS370 LONG REACH. Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0. TRACKED EXCAVATOR JS370 LONG REACH Net engine power: 210kW (281hp) Operating weight: 41149kg 42039kg Bucket capacity: 0.38m 3 0.79m 3 STATIC DIMENSIONS I E H M N J F K L G C D A B Illustration shows optional

More information

TRACKED EXCAVATOR JZ140 LC

TRACKED EXCAVATOR JZ140 LC TRACKED EXCAVATOR LC MAX. OPERATING WEIGHT: 589 kg (353 lb) 665 kg (3677 lb) WITH BLADE MAX. ENGINE POWER: 73 kw (98 hp) E I H K F HD HD L M G C D A B STATIC DIMENSIONS MONOBOOM Dimensions in millimetres

More information

WHEELED EXCAVATOR JS175W

WHEELED EXCAVATOR JS175W WHEELED EXCAVATOR SW MAX. OPERATING WEIGHT: 820 kg (39948 lb) ENGINE POWER: 28 kw (2 hp) G E F SW W S I H D C A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels

More information

WHEELED EXCAVATOR JS200W

WHEELED EXCAVATOR JS200W WHEELED EXCAVATOR S2W MAX. OPERATING WEIGHT: MONO 2322kg (51151lbs) / TAB 23273kg (5138lbs) ENGINE POWER: 128kW (172hp) G E F S2W W S 2 I H S 2 W D C A B STATIC DIMENSIONS Dimensions in millimetres (ft-in)

More information

TRACKED EXCAVATOR JS130LC

TRACKED EXCAVATOR JS130LC S TRACKED EXCAVATOR S0LC MAX. OPERATING WEIGHT: 428 kg (29604 lb) MAX. ENGINE POWER: 7 kw (98 hp) E I H K F 0LC L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground

More information

TRACKED EXCAVATOR JS360 LONG REACH

TRACKED EXCAVATOR JS360 LONG REACH MAX. OPERATING WEIGHT: 42150 kg (92925) lb NETT ENGINE POWER: TIER 3 202 kw (271 hp) E L D G F M H N C I K A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground 4021 (13-2)

More information

JCB TRACKED EXCAVATOR JS290LC TIER III

JCB TRACKED EXCAVATOR JS290LC TIER III K I C D L M J F E A B H G STATIC DIMENSIONS Dimensions in ft-in (millimetres) LC A Track length on ground 13-1 (3990) B Undercarriage overall length 15-11 (4860) C Track gauge 8-6 (2600) D Width over tracks

More information

JCB JS 130 TRACKED EXCAVATOR

JCB JS 130 TRACKED EXCAVATOR JCB JS 130 TRACKED EXCAVATOR MAX. OPERATING WEIGHT: 13900 kg NETT ENGINE POWER: 63 kw (85 hp) GENERAL SPECIFICATION STATIC DIMENSIONS J D E K F F C G L A B H I Dimensions in millimetres (ft. in.) A Track

More information

JCB WHEELED EXCAVATOR JS175W MONOBOOM & TAB

JCB WHEELED EXCAVATOR JS175W MONOBOOM & TAB MAX. OPERATING WEIGHT NETT ENGINE POWER 18120 kg (39948 lb) 128 kw (172 hp) G E F I H D C J A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels 1330 (4-4) B External

More information

JCB WHEELED EXCAVATOR JS145W MONOBOOM & TAB

JCB WHEELED EXCAVATOR JS145W MONOBOOM & TAB MAX. OPERATING WEIGHT NETT ENGINE POWER 15145 kg (33389 lb) 92 kw (123 hp) G E F I H D C J A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Internal width between dual wheels 1330 (4-4) B External

More information

WHEELED EXCAVATOR JS200W MATERIAL/SCRAP HANDLER

WHEELED EXCAVATOR JS200W MATERIAL/SCRAP HANDLER MAX. OPERATING WEIGHT: MATERIALS HANDLER 25825kg (56934lb) SCRAP HANDLER 25712kg (56685lb) ENGINE POWER: 128kW (172hp) H A H A L L F B F B J I G J I G E C D K E C D K STATIC DIMENSIONS MATERIALS HANDLER

More information

TRACKED EXCAVATOR JS145LC

TRACKED EXCAVATOR JS145LC S TRACKED EXCAVATOR SLC MAX. OPERATING WEIGHT: 200 kg (330 lb) MAX. ENGINE POWER: 73 kw (98 hp) E I H K F S L M G C D A B STATIC DIMENSIONS SLC MONOBOOM Dimensions in millimetres (ft-in) A Track length

More information

JCB TRACKED EXCAVATOR JS130 LC

JCB TRACKED EXCAVATOR JS130 LC MAX. OPERATING WEIGHT MAX. ENGINE POWER 13428 kg (29604 lb) 73 kw (98 hp) E I H K J F L M G C D A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 2865 (9-5) B Undercarriage

More information

JCB TRACKED EXCAVATOR JS 330 LONG REACH

JCB TRACKED EXCAVATOR JS 330 LONG REACH MAX. OPERATING WEIGHT NETT ENGINE POWER 3990 kg (7973 lb) TIER 3 0 kw (71 hp) TIER 17 kw (39 hp) E L D G F M H N C I K A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground

More information

JCB WHEELED EXCAVATOR JS145W

JCB WHEELED EXCAVATOR JS145W MAX. OPERATING WEIGHT NETT ENGINE POWER 15145kg 81kW (109hp) G E F I H D C J A B STATIC DIMENSIONS A Internal width between dual wheels 1330 (4-4) B External width over dual wheels 2490 (8-2) C Ground

More information

JCB WHEELED EXCAVATOR JS160W

JCB WHEELED EXCAVATOR JS160W MAX. OPERATING WEIGHT NETT ENGINE POWER 17770kg 81kW (109hp) G E F I H D C J A B STATIC DIMENSIONS A Internal width between dual wheels 1330 (4-4) B External width between dual wheels 2490 (8-2) C Ground

More information

JCB TRACKED EXCAVATOR JS 330 LC/NLC TIER 3

JCB TRACKED EXCAVATOR JS 330 LC/NLC TIER 3 TIER 3 MAX. OPERATING WEIGHT NETT ENGINE POWER 33288 kg (73387 lb) 202 kw (271 hp) I E H M N J F K L G C D A B STATIC DIMENSIONS JS330 LC/NLC MONOBOOM Dimensions in millimetres (ft-in) LC NLC A Track length

More information

JCB TRACKED EXCAVATOR JS 330 L/NL HRD

JCB TRACKED EXCAVATOR JS 330 L/NL HRD MAX. OPERATING WEIGHT NETT ENGINE POWER 3 kg (53 lb) 0 kw (1 hp) C F D G E A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) L NL A Track length on ground 3 (1-) 3 (1-) B Undercarriage overall length

More information

TRACKED EXCAVATOR JS460 LONG REACH

TRACKED EXCAVATOR JS460 LONG REACH MAX. OPERATING WEIGHT: 51408 kg (113335 lb) GROSS ENGINE POWER: 228 kw (305 hp) E K D G F L M H C I J A B STATIC DIMENSIONS Dimensions in millimetres (ft-in) LR A Track length on ground 4400 (14-4) B Undercarriage

More information

JCB TRACKED EXCAVATOR JZ 70

JCB TRACKED EXCAVATOR JZ 70 MAX. OPERATING WEIGHT NETT ENGINE POWER 8000kg kw (58hp) D E L F M C G H I A B K STATIC DIMENSIONS Dimensions in millimetres (ft-in) A Track length on ground 00 (7-) B Undercarriage overall length 830

More information

ENGINE HYDRAULICS SWING SYSTEM UNDERCARRIAGE TRACK DRIVE ENVIRONMENT JS220 TRACKED EXCAVATOR. Model

ENGINE HYDRAULICS SWING SYSTEM UNDERCARRIAGE TRACK DRIVE ENVIRONMENT JS220 TRACKED EXCAVATOR. Model Model Type Nett power (ISO 3046-1NF) Piston Displacement Injection Air Filtration Cooling Starter motor Batteries Alternator Refuelling pump Swing motor Swing brake Final drive Swing speed Swing gear Swing

More information

JCB MIDI EXCAVATOR 8085 ZTS

JCB MIDI EXCAVATOR 8085 ZTS JCB MIDI EXCAVATOR OPERATING WEIGHT: 17,694 lb (8026 kg) NET ENGINE POWER: 53 hp (39.5 kw) Interim Tier IV F E L G G1 H M D N I J A B C K STATIC DIMENSIONS ft-in (mm) A Sprocket Idler Centers 7-6 (2280)

More information

JCB MIDI EXCAVATOR 8065 RTS

JCB MIDI EXCAVATOR 8065 RTS JCB MIDI EXCAVATOR OPERATING WEIGHT:, lb (,8 kg) NET ENGINE POWER:. hp (8. kw) Interim Tier IV D F K C G L H E A B I J STATIC DIMENSIONS ft-in (mm) A Sprocket Idler Centers Rubber - (99) Sprocket Idler

More information

JCB MINI EXCAVATORS 8040 & 8045 ZTS

JCB MINI EXCAVATORS 8040 & 8045 ZTS OPERATING WEIGHTS: NET ENGINE POWER: 4300 kg (9480 lb) & 4750 kg (10472 lb) 33.1 kw (45 hp) D F K C G L H E A B I J STATIC DIMENSIONS A Sprocket idler centres 1845 (6-1) 1990 (6-6) B Undercarriage overall

More information

JCB MINI EXCAVATORS 8016 & 8018

JCB MINI EXCAVATORS 8016 & 8018 JCB MINI EXCAVATORS & OPERATING WEIGHT: NET ENGINE POWER: 55 lbs (59 kg) & lbs ( kg) 9 HP (. kw) H I E F K C J A B D G L JCB MINI EXCAVATORS & STATIC DIMENSIONS Machine model A Sprocket idler centers -

More information

JCB MINI EXCAVATORS 8025 ZTS / 8030 ZTS / 8035 ZTS

JCB MINI EXCAVATORS 8025 ZTS / 8030 ZTS / 8035 ZTS OPERATING WEIGHT: 5919 lb (685 kg) 709 lb (317 kg) 8049 lb (3651 kg) NET ENGINE POWER: 6.8 hp (0.1 kw) 6.8 hp (0.1kW) 30.4 hp (.7 kw) Interim Tier IV D F K 805 C C G L H I A B E J STATIC DIMENSIONS ft-in

More information

MINI EXCAVATORS 8040, 8045 ZTS AND 8050 RTS/ZTS

MINI EXCAVATORS 8040, 8045 ZTS AND 8050 RTS/ZTS OPERATING WEIGHTS: 4300 kg (9480 lb), 4750 kg (10472 lb) & 5253 kg (11511lb) NET ENGINE POWER: 33.1 kw (45 hp) STATIC DIMENSIONS mm (ft-in) mm (ft-in) mm (ft-in) A Sprocket idler centres 1845 (6-1) 1990

More information

TRACKED EXCAVATOR JS85. Net engine power: 55.3kW (74hp) Operating weight: 8105kg 8750kg Bucket capacity: m 3

TRACKED EXCAVATOR JS85. Net engine power: 55.3kW (74hp) Operating weight: 8105kg 8750kg Bucket capacity: m 3 TRACKED EXCAVATOR JS85 Net engine power: 55.3kW (74hp) Operating weight: 8105kg 8750kg Bucket capacity: 0.32 0.35m 3 STATIC DIMENSIONS K I L M J F E H G ENGINE Model Type Rated power (net) Torque Piston

More information

Mini Excavator 8018 CTS

Mini Excavator 8018 CTS NEW Mini Excavator Operating Weight: 1822 kg (4016 lb) Net Engine Power: 14.2 kw (19 hp) A Product of Hard Work MINI EXCAVATORS OPERATING WEIGHT: 1822 kg (4016 lbs) NET ENGINE POWER: 14.2 kw (19hp) K D

More information

NEW HYDRAULIC EXCAVATOR JS500 LC

NEW HYDRAULIC EXCAVATOR JS500 LC NEW HYDRAULIC EXCAVATOR JS500 LC Max engine power: 228kW (305hp) Operating weight: 46147kg/47090kg PERFORMANCE AND PRODUCTIVITY. BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW IT S GOING TO BE TOUGH ENOUGH

More information

JCB MIDI EXCAVATOR 8080ZTS

JCB MIDI EXCAVATOR 8080ZTS MX. OPERTING WEIGHT NET ENGINE POWER 18188lb (8250kg) 57.6hp (44kW) L G E H I M F1 D C F2 K STTIC DIMENSIONS Dimensions in ft-in (millimetres) Track length on ground 7-3 (2200) Undercarriage overall length

More information

JCB LOADALL / /

JCB LOADALL / / MAX PAYLOAD: 4,000 lb (1,814 kg) MAX LIFT HEIGHT: 13 ft 3 in (4.0 m) MAX HORSEPOWER: 49 hp (37 kw) B A 520-40 H D E C F G 520-40 STATIC DIMENSIONS 10.00 x 16.5 12 ply Tires 12.00 x 16.5 10 ply Tires A

More information

JCB LOADALL , , SPEC COMPACT TELESCOPIC HANDLERS

JCB LOADALL , , SPEC COMPACT TELESCOPIC HANDLERS JCB LOADALL 520-40, 524-50, 527-55 SPEC COMPACT TELESCOPIC HANDLERS JCB LOADALL 520-40 MAX. PAYLOAD: MAX. LIFT HEIGHT: MAX. HORSEPOWER: 4000lb 13ft 3in 50hp B A JCB LOADALL 520-40 H D E C F G STATIC DIMENSIONS

More information

JS220LC EXCAVATOR. Hydraulic Excavator JS220LC Engine Power: 129kW (173hp) Bucket Capacity: m³ Operating Weight: kg

JS220LC EXCAVATOR. Hydraulic Excavator JS220LC Engine Power: 129kW (173hp) Bucket Capacity: m³ Operating Weight: kg JS220LC EXCAVATOR Hydraulic Excavator JS220LC Engine Power: 129kW (173hp) Bucket Capacity: 0.40 1.19m³ Operating Weight: 21144 22490kg STRENGTH INSIDE AND OUT BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW

More information

HYDRAULIC EXCAVATOR JS240/260 LC/SC/NLC

HYDRAULIC EXCAVATOR JS240/260 LC/SC/NLC HYDRAULIC EXCAVATOR JS240/260 LC/SC/NLC Engine power: 140kW (188hp) Bucket capacity: 0.65 1.65m 3 Operating weight: 25920 28500kg STRENGTH, INSIDE AND OUT. BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW

More information

HYDRAULIC EXCAVATOR JS240/260 LC/SC/NLC

HYDRAULIC EXCAVATOR JS240/260 LC/SC/NLC HYDRAULIC EXCAVATOR JS240/260 LC/SC/NLC Engine power: 140kW (188hp) Bucket capacity: 0.65 1.65m 3 Operating weight: 25920 28500kg STRENGTH, INSIDE AND OUT. BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW

More information

JCB MIDI EXCAVATOR 8080ZTS

JCB MIDI EXCAVATOR 8080ZTS MX. OPERTING WEIGHT NETT ENGINE POWER 8250kg 44kW (58hp) E D L F1 F2 G M C H I K STTIC DIMENSIONS Dimensions in millimetres (ft-in) Track length on ground 2200 (7-3) Undercarriage overall length 2830 (9-3)

More information

Hydraulic Excavator JS210 LC

Hydraulic Excavator JS210 LC NEW Hydraulic Excavator JS210 LC Engine Power: 128kW (172hp) Bucket Capacity: 0.40 1.19m³ Operating Weight: 21144 22490kg A Product of Hard Work REDEFINING excavation Redefining excavation Contents Strength

More information

Hydraulic Excavator JS210 LC

Hydraulic Excavator JS210 LC NEW Hydraulic Excavator JS210 LC Engine Power: 128kW (172hp) Bucket Capacity: 0.40 1.19m³ Operating Weight: 21144 22490kg A Product of Hard Work REDEFINING excavation Redefining excavation Contents Strength

More information

HYDRAULIC EXCAVATOR JS240/260 LC/SC/NLC

HYDRAULIC EXCAVATOR JS240/260 LC/SC/NLC HYDRAULIC EXCAVATOR JS240/260 LC/SC/NLC Engine power: 140kW (188hp) Bucket capacity: 0.77 1.46m 3 Operating weight: 24238-28308kg STRENGTH, INSIDE AND OUT. BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt

More information

EC210B LC EC210B NC/EC210B NLC

EC210B LC EC210B NC/EC210B NLC VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~

More information

HYDRAULIC EXCAVATOR JS300 LC. Net engine power: 165kW (221hp) Operating weight: 32430kg

HYDRAULIC EXCAVATOR JS300 LC. Net engine power: 165kW (221hp) Operating weight: 32430kg HYDRAULIC EXCAVATOR JS300 LC Net engine power: 165kW (221hp) Operating weight: 32430kg PERFORMANCE AND PRODUCTIVITY. BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW IT S GOING TO BE TOUGH ENOUGH TO PERFORM

More information

EQUIPMENT ENGINE HYDRAULIC SYSTEM

EQUIPMENT ENGINE HYDRAULIC SYSTEM EQUIPMENT ENGINE Model... Isuzu AI-4JJ1X Type... 4-cycle water-cooled, direct injection Aspiration... Turbocharged, intercooled No. of cylinders... 4 Rated power ISO 9249, net... 90.2 kw (121 HP) at 2

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

JS140 MOST FUEL EFFICIENT 14T EXCAVATOR

JS140 MOST FUEL EFFICIENT 14T EXCAVATOR NEW JS140 MOST FUEL EFFICIENT 14T EXCAVATOR LEADING WITH PERFORMANCE Gross engine power: 75kW (100hp), Bucket capacity: 0.63-0.72 cu.m Max. operating weight: 14320 kg Reliability & Durability Durable heavy

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Operating Weight: 105,600 lbs (47,900 kg) SAE Net Horsepower: with fan pump 329 HP (245 kw) without fan pump 362 HP (270 kw) Range: 1.58-4.05 yd 3 (1.21-3.10 m 3 ) Engine Isuzu AH-6UZ1XYSS Tier 3 turbocharged

More information

HYDRAULIC EXCAVATOR JS330/360 LC/NLC

HYDRAULIC EXCAVATOR JS330/360 LC/NLC NEW HYDRAULIC EXCAVATOR JS330/360 LC/NLC Net engine power: 210kW (281hp) Operating weight: 32029kg/38016kg PERFORMANCE AND PRODUCTIVITY. BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW IT S GOING TO BE TOUGH

More information

JCB BACKHOE LOADER 2CX 12 FT

JCB BACKHOE LOADER 2CX 12 FT JCB BACKHOE LOADER 1 FT B C F E H D A G STATIC DIMENSIONS JCB 1FT features four wheel drive, four wheel steering, four equal sized tires, a heavy duty one piece mainframe, componentized driveline and fully

More information

Undercarriage. Lubricant and Coolant Capacity. Travel System

Undercarriage. Lubricant and Coolant Capacity. Travel System MATERIAL HANDLER Operating Weight: 76,49 lbs (8, kg) SAE Net Horsepower: with fan pump 49 HP (69 kw) without fan pump HP (97 kw) Swing Torque: 96,6 lbf-ft. (66. kn m) Engine Isuzu AH-6WGXYSS- Tier turbocharged

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): 1 800 ~ 3 775 l Turbocharged VOLVO diesel engine with direct injection and charged air cooler

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

EC140B LC VOLVO EXCAVATOR

EC140B LC VOLVO EXCAVATOR VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection

More information

JCB BACKHOE LOADER 3C

JCB BACKHOE LOADER 3C MAX. ENGINE POWER 85hp (63kW) F E B C J H D A G STATIC DIMENSIONS JCB Series 4 Backhoe Loaders feature heavy duty one piece mainframe, componentized driveline and fully enclosed engine compartment. All

More information

HYDRAULIC EXCAVATOR JS330/370 LC

HYDRAULIC EXCAVATOR JS330/370 LC NEW HYDRAULIC EXCAVATOR JS330/370 LC Net engine power: 210kW (281hp) Operating weight: 32029kg/38016kg PERFORMANCE AND PRODUCTIVITY. BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW IT S GOING TO BE TOUGH

More information

CX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m)

CX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m) CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Isuzu AM-4JJ1X, Tier 4 Interim Certified (Cooled EGR) Fuel Type Cylinders Requires ultra low-sulfur fuel B5 biodiesel tolerant

More information

MINI EXCAVATORS 8014/8016/8020 CTS

MINI EXCAVATORS 8014/8016/8020 CTS MINI EXCAVATORS // CTS OPERATING WEIGHT: 5 kg ( lbs) / 59 kg (55 lbs) / kg ( lbs) / kg (5 lbs) NETT ENGINE POWER:. kw (9hp) D F K C G L H I A B E J STATIC DIMENSIONS Machine model CTS CTS CTS mm (ft-in)

More information

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR VOLVO EXCAVATOR EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 134 kw (180 hp) Operating weight: LC: 24.2 ~ 25.8 t NLC: 24.8 ~ 25.7 t Turbocharged VOLVO diesel engine with water cooling,

More information

LOADALL / HiViz

LOADALL / HiViz LOADALL -/- HiViz MAX. PAYLOAD:. tonnes (lb) MAX. LIFT HEIGHT:. metres (ft in) and. metres (ft in) STATIC DIMENSIONS - HiViz STATIC DIMENSIONS - HiViz C C A - A - H H D J E K D J E K B F B F G G STATIC

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Operating Weight: 28,440 (12,900 kg) SAE Net Horsepower: 95 HP (71 kw) Bucket Range:.42 -.98 yd 3 (.32 -.75 m 3 ) Engine Isuzu AJ-4JJ1X Tier 3 turbocharged diesel engine with electronic fuel control, 4-cylinder,

More information

HYDRAULIC EXCAVATOR JS300 LC/NLC. Net engine power: 165kW (221hp) Operating weight: 31013/32687kg

HYDRAULIC EXCAVATOR JS300 LC/NLC. Net engine power: 165kW (221hp) Operating weight: 31013/32687kg HYDRAULIC EXCAVATOR JS300 LC/NLC Net engine power: 165kW (221hp) Operating weight: 31013/32687kg PERFORMANCE AND PRODUCTIVITY. BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW IT S GOING TO BE TOUGH ENOUGH

More information

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM VOLVO EXCAVATOR EC160B LC EC160B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 90 kw (121 hp) Operating weight: LC: 16.6 ~ 18.4 t NLC: 16.5 ~ 18.3 t Buckets (SAE) 775 ~ 1,225 l Turbocharged VOLVO diesel

More information

Hydraulic Excavator JS220 SC/LC/NLC

Hydraulic Excavator JS220 SC/LC/NLC NEW Hydraulic Excavator JS220 SC/LC/NLC Engine Power: 128kW (172hp) Bucket Capacity: 0.40 1.19m³ Operating Weight: 21144 22490kg A Product of Hard Work REDEFINING excavation Redefining excavation Contents

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Operating Weight: 105,600 lbs (47,900 kg) SAE Net Horsepower: with fan pump 329 HP (245 kw) without fan pump 362 HP (270 kw) Range: 1.58-4.05 yd 3 (1.21-3.10 m 3 ) Engine Isuzu AH-6UZ1XYSS Tier 3 turbocharged

More information

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,

More information

JCB MINI EXCAVATORS 8016 & 8018

JCB MINI EXCAVATORS 8016 & 8018 JCB MINI EXCAVATORS & OPERATING WEIGHT: NETT ENGINE POWER: 59 kg (55 lbs) & kg ( lbs). kw (9 hp) D F K C G L H I A B E J STATIC DIMENSIONS Machine model A Sprocket idler centres 7 (-) 7 (-) B Undercarriage

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l Turbocharged VOLVO diesel engine with water cooling, direct injection and charged

More information

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51 CX800B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/ Displacement Fuel injection Fuel Fuel filter Cooling Horsepower per SAE J1349

More information

Hydraulic Excavator JS220 SC/LC/NLC

Hydraulic Excavator JS220 SC/LC/NLC NEW Hydraulic Excavator JS220 SC/LC/NLC Engine Power: 129kW (173hp) Bucket Capacity: 0.40 1.19m³ Operating Weight: 21144 22490kg A Product of Hard Work REDEFINING excavation Redefining excavation Contents

More information

NEW JS120 LEADING WITH PERFORMANCE MOST FUEL EFFICIENT 12T EXCAVATOR

NEW JS120 LEADING WITH PERFORMANCE MOST FUEL EFFICIENT 12T EXCAVATOR NEW JS120 MOST FUEL EFFICIENT 12T EXCAVATOR LEADING WITH PERFORMANCE Gross engine power: 60kw (80hp), Bucket capacity: 0.5-0.65 cu.m Max. operating weight: 12800 kg Reliability & Durability Durable heavy

More information

With Tier 4 Interim Engine installed. hyundai heavy industries

With Tier 4 Interim Engine installed. hyundai heavy industries With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

HYDRAULIC EXCAVATOR JS220LC Engine power: 173hp (129kW) Bucket capacity: ft³ Operating weight: lb

HYDRAULIC EXCAVATOR JS220LC Engine power: 173hp (129kW) Bucket capacity: ft³ Operating weight: lb HYDRAULIC EXCAVATOR JS220LC Engine power: 173hp (129kW) Bucket capacity: 14.1 42ft³ Operating weight: 48290 49582lb STRENGTH INSIDE AND OUT. BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW IT S GOING TO

More information

305 CR. Mini Hydraulic Excavator

305 CR. Mini Hydraulic Excavator 305 CR Mini Hydraulic Excavator Engine Power Gross 32 kw 43 hp Net 31.3 kw 42 hp Maximum Operating Weight With cab 4990 kg 11,000 lb With canopy 4940 kg 10,890 lb 305 CR Mini Hydraulic Excavator Designed

More information

HYDRAULIC EXCAVATOR JS330/370 LC/NLC. Net engine power: 210kW (281hp) Operating weight: 32972kg 38626kg

HYDRAULIC EXCAVATOR JS330/370 LC/NLC. Net engine power: 210kW (281hp) Operating weight: 32972kg 38626kg HYDRAULIC EXCAVATOR JS330/370 LC/NLC Net engine power: 210kW (281hp) Operating weight: 32972kg 38626kg PERFORMANCE AND PRODUCTIVITY. BEFORE YOU BUY AN EXCAVATOR, YOU NEED TO KNOW IT S GOING TO BE TOUGH

More information

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design CX700B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/Stroke Displacement 5.79 in x 6.07 in (147 x 154 mm) 957 in 3 (15 700 cc) Grade

More information

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp) ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA

More information

Specif ications R125LCR-9A

Specif ications R125LCR-9A Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power

More information

JCB BACKHOE LOADER MINI CX 4x4 SERIES II

JCB BACKHOE LOADER MINI CX 4x4 SERIES II MAX. ENGINE POWER: MAX. BAKHOE DIG DEPTH (STANDARD DIPPER): MAX. LOADER APAITY: 16.8kW (22.5hp) 2540mm (8ft 4in) 625kg (1378lb) A B G E F H D 1 STATI DIMENSIONS mm (ft-in) A Overall height to canopy 2170

More information

JCB LOADALL HiViz / HiViz

JCB LOADALL HiViz / HiViz JCB LOADALL - HiViz / - HiViz MAX. PAYLOAD: MAX. LIFT HEIGHT:. tonnes (lb). metres (ft in) and. metres (ft in) STATIC DIMENSIONS - HiViz STATIC DIMENSIONS - HiViz C C A A H H D J E K D J E K B F B F G

More information

CX210C EXCAVATOR. Swing mechanism. Length 14 ft 8 in (4.47 m) Track gauge 7 ft 10 in (2.4 m) Track Grease lubricated / strutted

CX210C EXCAVATOR. Swing mechanism. Length 14 ft 8 in (4.47 m) Track gauge 7 ft 10 in (2.4 m) Track Grease lubricated / strutted CX210C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Fuel Type Cylinders Isuzu AM-4HK1X Tier 4 Interim Certified (Cooled EGR) Requires ultra low-sulfur fuel B5 biodiesel tolerant

More information

FASTRAC 3200/3230 XTRA

FASTRAC 3200/3230 XTRA ABS BRAKING FULLY SUSPENDED WITH 4 WHEEL ABS DISC BRAKING (TERRITORY DEPENDENT). JCB P-TRONIC TRANSMISSION. A B G H C D E F STATIC DIMENSIONS Tyres 540/65R30 495/70R24 A Height to exhaust 3.17 (10-5) 3.09

More information