Everything an Ellis Boat should be classic, sturdy, functional,

Transcription

1 New Ellis 36 Express Cruiser Available direct from Ellis Boat Company, Inc. Everything an Ellis Boat should be classic, sturdy, functional, beautiful, and built with pride. This amazing vessel includes: A generator, heat & air, separate shower, freezer with ice maker, fridge, 3-burner cooktop with oven, teak floors throughout, expansive seating and large-party dining setup with fold-out tables and Ellis Cantilevered Helm & Nav seating, Garmin electronics, shorepower, the Evolution Driveshaft System, bowthruster, a powerful Yanmar diesel engine with a skeg-protected 5-blade prop and rudder. The Ellis Boat Company crew, including the designer Donald Ellis, are extremely proud of this yacht. Call Ellis Boat Company directly to schedule an appointment to see this vessel in our showroom. (207) (x6) or sales@ellisboat.com ELLIS 36 EXPRESS CRUISER Length overall 40 5 Length on deck Length waterline 33 4 Maximum beam 13 2 Draft (keel) 3 10 Displacement 16,000-17,000 lbs. Diesel fuel 2 x 105 gallons Potable water 2 x 50 gallons Wastewater 1 x 36 gallons ENGINE: Yanmar 530hp Cruising speed knots Max speed 26 knots

2

3

4

5

6 ELLIS 36 HARDTOP EXPRESS CRUISER SPECIFICATIONS ELLIS 36 HULL No. 32 HULL: Semi-displacement with integral fiberglass skeg protecting the shaft, prop & rudder 1 deadrise at transom ISO NPG gelcoat with blister-resistant vinylester resin High-tech composite with stitched biaxial E-Glass construction for superior strength Vacuum bagged ATC Core-Cell structural foam core Stitched biaxial structural E-Glass reinforced stringer system Gelcoat finished bilges for ease of maintenance Fiberglass swim platform with solid teak surface Undermount coated aluminum swim ladder Linear Polyurethane boot stripe Metal-free biocide antifouling bottom paint system Teak Transom with Transom Door Awlgrip Corinthian Blue, Red Boot, Black Bottom DECK: ISO NPG gelcoat with vinylester resin High-tech composite with stitched biaxial E-Glass construction for superior strength Vacuum bagged ATC Core-Cell structural foam core Gelcoat non-skid surface Teak Guards, Rails, and Side-stripe ENGINE SYSTEM: 530-hp Yanmar diesel engine Oil catch basin under engine 2.5:1 ZF Model 280 transmission Sealed 2 stainless steel Evolution Quiet Drive shaft system 26 5-blade magnesium-bronze propeller 80- amp, 12-volt alternator Groco 2 raw water intake strainer Engine air intake through aft cockpit grills White gelcoat finished engine room 2-inch Soundown sound insulation on main bulkhead, under all floor panels & hatches All access hatches lined with acoustical gasketing Engine compartment cooling through side-mounted, molded fiberglass, dorads All thru-hulls isolated with solid glass to insure integrity of Core-Cell core Ball valve style silicon bronze seacocks with double hose clamps FUEL SYSTEM: (2) ABYC, NMMA & USCG approved 105-gallon baffled aluminum fuel tanks 900 Series Racor 30-micron primary fuel filter/water separator Yanmar 2-micron secondary fuel filter/water separator (2) polished stainless steel diesel deck fills USCG approved, fire-resistant fuel hoses with double hose clamps STEERING SYSTEM: Marine Hydraulics Hydro-Slave power steering system 316 stainless steel rudder (1½ diameter rudder post) Sidepower SP55 electric bow thruster with helm control FORWARD CABIN: 7-foot 6-inchV-berth with 6 covered cushions with memory foam & breathable top layer Teak V-berth trim Cypress sheathing surrounding V-berth Drop-in storage compartments under V-berth cushions Teak drawers and drop-down lockers under V-berth Chain locker forward with teak louvered door Large cedar lined hanging locker with 3 shelves, hanger pole & teak louvered door Fiberglass floor with custom gelcoat non-skid surface Leather grained headliner with teak trim (2) Bomar hatches with self-contained OceanAir sun shades and screens 3.8 cubic foot insulated floor locker with drain between V-berths 5.25 cubic foot insulated floor locker with drain in center of cabin floor Solid Teak Cabin Floor V-berth filler GALLEY: Molded fiberglass counter with teak fiddle rail and trim Hand-polished 304 stainless steel double sink with washerless Moen faucet Teak drawers and storage lockers below counter Teak trimmed sliding door storage cabinet Top Loading Freezer with Ice Maker 1.2 cubic foot stainless steel convection microwave 3-burner electric range (2) teak pot locker drawers Hot and cold pressurized water Nova Kool 12-volt DC/120-volt AC refrigerator with freezer compartment Custom Ellis designed teak plate and bowl storage rack Custom Ellis designed teak mug and spice rack Melamine dinnerware (choice of colors): (8) 12oz mugs, (8) 8 salad plates, (8) 10 dinner plates, (8) 16oz soup bowls (8) 14oz Makrolon tumblers (2) 3.3qt, (2) 1.5qt, (2) 0.6qt food canisters, and salt & pepper mills Teak towel ring HEAD: Teak sliding door Molded fiberglass counter with teak fiddle rail and trim 13 hand-polished 304

7 stainless steel sink with washerless Moen faucet Teak drawers and storage lockers below counter Teak trimmed sliding door storage cabinet Teak framed mirror above sink cabinet Separate molded fiberglass shower with seat Alsons shower head & mixing valve Bi-folding ½ clear acrylic shower door Hot and cold pressurized water Separate shower sump (2) stainless steel towel bars SHELTER: Express Cruiser hardtop with gelcoat non-skid surface and teak supports Acoustical headliner with teak trim (2) Bomar hatches with self-contained OceanAir sun shades and screens Stamoid side curtains & three-panel backdrop with eisenglass panels Teak cap rail Port and starboard Ellis Cantilevered Hydraulic Seats with covered cushions (convert to 2 settees or 2 twin bunks in conjunction with stern seats) (2) Teak trimmed sliding door storage lockers Teak companionway doors and cover Removable teak companionway stairs (2) 30 x 48 folding teak tables mounted on port and starboard cabin sides (3) Large (26½ x 61 ) engine room hatches w/gas struts, 4 diameter stainless compression latches/hinges (removable hatch irons create a single 86 x 61 opening) (25 x 25 ) shaft access and storage hatch with gas struts, 4 diameter stainless steel compression latch and hinges (3) front powder coated aluminum opening windshields (3) 2-speed, self-parking, pantograph windshield wipers with washers (2) powder coated aluminum side windows Fiberglass floor with gelcoat non-skid surface Linear Polyurethane side stripe matching hull color Solid Teak installed on all floors Custom Seating with pull-out boarding steps HELM STATION: Enclosed cabinet with teak top and fiberglass instrument insert Teak trimmed electrical, electronics and hydraulic access panel Side arm cabinet for hydraulic seats and additional electronics Ellis adjustable teak and hand-polished stainless steel footrest Single lever control Engine control panel: o Start/Stop control o Tachometer w/hour meter o Engine temperature o Engine oil pressure o Voltmeter o Water temp and oil pressure alarm Lighted Ritchie 4½ Binnacle compass Windlass and air horn controls Operators electrical control panel Stazo 24 stainless steel destroyer wheel Ellis designed Pump Running Indicator Light System Electronics Package Ellis 36 Hull # 32 NAVIGATION STATION: Enclosed cabinet with top storage compartment with hinged teak cover Teak trimmed electrical access panel Side arm cabinet for hydraulic seats, additional electronics & air conditioning grill Ellis adjustable teak and hand-polished stainless steel footrest COCKPIT: (2) teak folding stern seats with cushions (convert to twin bunks in conjunction with Ellis Cantilevered Hydraulic Seats ) (3) Large (25½ x 32½ ) lazaret hatches with gas struts, 4 diameter stainless steel compression latches and hinges (removable hatch irons create a single 84 x 25½ opening) (2) teak trimmed sliding door storage lockers Fiberglass floor with gelcoat non-skid surface SHURflo PRO Blaster 3.5 GPM high-pressure pump supplies salt water to bow and cockpit faucets Additional salt and fresh water faucets in cockpit Cockpit shower with recessed mixing valve Solid Teak installed on all floors Transom Door Custom Seating with pull-out boarding steps HARDWARE: 1-inch diameter type 316 stainless steel bow rail (2) 1-inch diameter type 316 stainless steel hand rails on cabin top (2) 1-inch diameter type 316 stainless steel hand rails on shelter top (2) 1-inch diameter type 316 stainless steel hand rails on front corners of shelter (4) polished stainless steel cleats (2 amidships, 2 aft) (1) polished stainless steel bow bitt (2) polished stainless steel skene bow chocks (2) 316 polished stainless steel fender eyes amidships Polished stainless steel flagpole holder, ferruled teak flag staff and 3 x5 U.S. flag Fiberglass bow pulpit with 316 hand-polished stainless steel anchor roller & windlass Polished

8 Stainless anchor with 150 of 5/16 chain and 150 of 5/8 nylon (6) polished 316 stainless steel opening port lights with angled spigots and screens High impact Teak guards and rails with solid polished stainless steel half oval Added numerous teak and stainless handrails WASTE DISPOSAL: 36-gallon holding tank with overboard discharge macerator pump 1½ Scandvik polished stainless steel deck pump out plate 12-volt DC marine head w/12-volt vacuum generator All gray water drainage through 2 isolated thru hulls FRESH WATER SYSTEM: (2) 50-gallon water tanks 12-gallon hot water tank FDA approved color-coded (blue cold/red hot) Whale semi-rigid pipe system 3.8 GPM 12-volt DC SHURflo water pump 1½ polished stainless steel deck fill plate 120-VOLT AC ELECTRICAL SYSTEM: (2) 30-amp 120-volt AC shore power outlets (2) 50, 30-amp, shore power cords Battery charger (20-amp, charges 3 battery banks simultaneously) Illuminated AC circuit breaker panel with flush breakers and digital monitor 120-volt GFCI protected outlets (2) in galley, (1) in head and (2) in shelter 8-kw Fischer Panda Generator 16kBtu Cruisair Reverse Cycle Air Conditioning 12-VOLT DC ELECTRICAL SYSTEM: (1) 4D dedicated engine starting battery (2) 8D deep cycle house batteries USCG & ABYC approved polyethylene battery boxes Heavy-duty battery switch with parallel capabilities for emergency starting Illuminated DC circuit breaker panel with flush breakers and digital monitor DC sub panel on sidearm at helm 12-volt DC outlets at helm and navigation stations 12-volt DC dual trumpet air horn USCG approved running lights on pulpit USCG approved 360 masthead light (3) 750 GPH bilge pumps; (1) located forward of the main bulkhead, (1) in engine compartment just aft of engine, (1) auxiliary pump located just forward of engine. AGM Batteries LIGHTING: 5½ stainless steel dome lights (2) over V-berth, (2) in galley, (1) in head, (1) in shower, (2) in shelter, (1) above companionway (includes red lens to preserve night vision) Vanity light on mirror in head (4) engine room lights (4) cockpit lights Spotlight with helm control WOOD FINISH: All interior and exterior teak finished with Epifanes Satin (in cabin) or Gloss Varnish. OTHER: (4) 5/8, three strand nylon dock lines (4) 8 x 20 inflatable fenders with Polartec covers (1) boat hook (6) adult life jackets, (1) flotation cushion (2) 5lb class A, B and C fire extinguishers, (1) in cabin, (1) in shelter (1) first aid kit (1) flare kit (1) signaling device