Parallel Type Air Gripper/2 Finger, 3 Finger, 4 Finger

Size: px
Start display at page:

Download "Parallel Type Air Gripper/2 Finger, 3 Finger, 4 Finger"

Transcription

1 Parallel Type Air Gripper/ inger, inger, inger MHS Series ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D-

2 ightweight, compact design with reduced height High repeatability: ±.1 mm Auto switch capable A wide variety of solid state auto switches can be mounted using the body s side mounting grooves. Selections include -color indication and water resistant types. Smaller auto switch mountable Smaller auto switches D-M(V) D-MW(V) D-MA(V) Easy alignment when mounting Positioning pin holes are provided on the top of the gripper. Can be mounted from two directions Using tapped holes Using through holes Employs wedge cam construction The wedge cam mechanism allows strong gripping force to be obtained from a compact design. Series Variations Bore size (mm) -inger MHS Series Gripping of diverse workpieces 1 1 P. MHS Series -inger -inger Axial gripping of cylindrical workpieces ong stroke MHS Series Accommodates a wide range of workpiece diameters MHS Series Positioning of square workpieces P. P.1 P.

3 Ideal for gripping workpieces of different diameters MHS ong Stroke P.1 Opening/Closing stroke more than twice the standard (MHS) Gripping of different diameter workpieces The mounting pitch is compatible with the standard type. Bore size (mm) 1 1 Stroke (mm) Dia.: Open Closed 1 () 1 () () 1 () () () (1) () () () Height (mm) Weight (g) 1 1 1,,,, Standard inside ( )/MHS stroke Open Closed With dust cover/mhsj P. Through-hole/MHSH P. Air blowing Pushing out a workpiece with external cylinder Single acting/mhs-x ø1, ø, ø, ø, ø, ø, ø Symbol Single acting/normally open: External grip MHS Variations MHSJ MHSH MHSHJ MHS-X Dust cover Bore size (mm) 1 With dust cover Through-hole With center pusher (Cylinder type) With center pusher (Spring type) Through-hole with dust cover With dust cover/center pusher (Cylinder type) With dust cover/center pusher (Spring type) Single acting (Normally open, Normally closed) With dust cover/center pusher The dust cover and center pusher assembly can be modularized for the through-hole MHSH. Through-hole MHSH Center pusher assembly Spring type MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- Single acting/normally closed: Internal grip Cylinder type P. 1

4 Added single acting (Made to Order -X) to -finger type (MHS Series). ø1, ø, ø, ø, ø, ø, ø Normally open or normally closed type can be selected. P. Port position can be changed according to installation conditions. The piping can be connected from the side port or top port of the body, which allows for improved piping flexibility. Top port Piping and auto switch wiring entries are one way. (or top ported) Space reduced through integration of air piping and auto switch wiring. Auto switch wiring Air piping Side port Series Variations Series Action Bore size [mm] 1 1 MHS Single acting Double acting V V V V V V V V V V Normally open Normally closed V V V V V V V

5 MHS Series Selection Selection Selection Procedure Step 1 Confirmation of gripping force Step Confirmation of gripping point Step 1 Confirmation of Gripping orce Confirmation of conditions Calculation of required gripping force Selection of model from gripping force graph Example Workpiece mass:. kg Gripping method: External gripping Number of fingers: Gripping point: mm selection criteria with respect to workpiece weight Although differences will exist depending on the coefficient of friction between attachments and workpieces, select a model which will provide a gripping force as shown in the table below. Note1) Refer to the model selection illustration regarding multiples of the workpiece weight. Multiples of gripping force by workpiece weight MHS 1 to times or more MHS MHSJ to 1 times or more MHSH MHS MHS to 1 times or more If high acceleration, deceleration or impact forces are encountered during motion, a further margin of safety should be considered. Example) When it is desired to set the gripping force at times or more above the workpiece weight. Required gripping force =. kg x x. m/s. N or more MHS-D External Gripping orce 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa 1 Selecting the MHS-D. A gripping force of N is obtained from the intersection point of the gripping point distance = mm and a pressure of. MPa. The gripping force is times greater than the workpiece mass, and therefore satisfies a gripping force setting value of times or more. Operating pressure:. MPa Note) or Step, refer to the gripping point for the effective gripping force of each model.

6 Parallel Type Air Gripper inger, inger, inger MHS Series Selection Illustration When gripping a workpiece as in the figure to the left, and with the following definitions, n: Number of fingers : µ: Coefficient of friction between attachments and workpiece m: Workpiece mass (kg) g: Gravitational acceleration (=. m/s ) mg: Workpiece weight (N) the conditions under which the workpiece will not drop are n x µ > mg and therefore, µ x m x g µ x mg > n x µ With a as the safety margin, is determined as follows: a x mg = n x µ Multiples of Gripping orce by Workpiece Mass Number of fingers: When n = SMC performs calculations allowing for impacts which occur during normal transfer, etc., using a safety margin of a =. When µ =. When µ =.1 mg = x x. = 1 x mg mg = x x.1 = x mg 1 x workpiece weight x workpiece weight Note) Even in cases where the coefficient of friction is greater than µ =., for safety reasons, SMC recommends selecting a gripping force which is at least 1 to times the workpiece weight. If high acceleration, deceleration or impact forces are encountered during motion, a further margin of safety should be considered. MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D-

7 Parallel Type Air Gripper/-inger Type MHS Series ø1, ø, ø, ø, ø, ø, ø Bore size ø1 to ø Number of fingers fingers Bore size ø to ø Number of fingers fingers MHS MHS Bore size 1 1 mm mm mm Bore size mm mm mm mm D D MBW Action D Double acting Action D Double acting Auto switch Nil Without auto switch (Built-in magnet) or the applicable auto switch model, refer to the table below. Applicable Auto Switches/Refer to pages to for further information on auto switches. MBW Made to Order Refer to page for details. Number of auto switches Nil pcs. S 1 pc. Auto switch Nil Without auto switch (Built-in magnet) or the applicable auto switch model, refer to the table below. Applicable Auto Switches/Refer to pages to for further information on auto switches. Number of auto switches Nil pcs. S 1 pc. Made to Order Refer to page for details. Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) Pre-wired Applicable function entry light (Output) DC AC Perpendicular In-line. (Nil) 1 (M) () (Z) connector load -wire (NPN) -wire (PNP) -wire V, V V MNV MPV MBV MN MP MB IC circuit Diagnosis -wire (NPN) V, MNWV MNW IC Relay, (-color Grommet Yes -wire (PNP) V V MPWV MPW circuit PC indicator) -wire V MBWV MBW -wire (NPN) V, MNAV MNA Water resistant -wire (PNP) V MPAV MPA (-color indicator) IC circuit -wire V MBAV MBA Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. ead wire length symbols:. m Nil (Example) MN Auto switches marked with a symbol are produced upon receipt of order. 1 m M (Example) MNWM m (Example) MN m Z (Example) MNZ Note) When using the -color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Solid state auto switch Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) Pre-wired Applicable function entry light (Output) DC AC Perpendicular In-line. (Nil) 1 (M) () (Z) connector load -wire (NPN) -wire (PNP) -wire V, V V MNV MPV MBV MN MP MB IC circuit Diagnosis -wire (NPN) V, MNWV MNW IC Relay, (-color Grommet Yes -wire (PNP) V V MPWV MPW circuit PC indicator) -wire V MBWV MBW -wire (NPN) V, MNAV MNA IC Water resistant -wire (PNP) V MPAV MPA circuit (-color indicator) -wire V MBAV MBA Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. ead wire length symbols:. m Nil (Example) MNW Auto switches marked with a symbol are produced upon receipt of order. 1 m M (Example) MNWM m (Example) MNW m Z (Example) MNWZ Note 1) When using the -color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Note ) When ordering the air gripper with auto switch, auto switch mounting brackets are supplied with the air gripper having a bore size of ø to ø. Note ) When ordering the auto switch separately, auto switch mounting brackets (BMG-) are required. Solid state auto switch How to Order

8 Parallel Type Air Gripper/-inger Type MHS Series /Specifications Bore size (mm) luid Operating pressure (MPa) Ambient and fluid temperature ( C) Repeatability (mm) Max. operating frequency (c.p.m.) ubrication Action Effective gripping External grip force (N) at. MPa Note) Internal grip Opening/Closing stroke (Both sides) (mm) Weight (g) MHS-1D 1 1 MHS-D. to. MHS-D Air -1 to ±.1 Not required Double acting 1 MHS-D Note) Values for ø1 to ø are with gripping point = mm, and for ø to ø with gripping point = mm. Refer to Effective Gripping orce data on pages and for the gripping force at each gripping position. MHS-D to. MHS-D 1 MHS-D 1 Symbol Double acting: Internal grip Double acting: External grip MHZ MH MH MHR Made to Order Click here for details Symbol Specifications/Description -X Heat resistance (1 C) -X luororubber seal -X Without magnet -X EPDM seal/luorine grease -X Axial ported -X luorine grease -X Grease for food processing machines, luorine grease -XA Grease for food processing machines Refer to pages to for the specifications of products with auto switches. Auto switch installation examples and mounting positions Auto switch hysteresis Auto switch mounting Protrusion of auto switch from edge of body MHK MHS MHC MHT MHY MHW -X MRHQ MA D- A

9 MHS Series Construction Closed condition Open condition! w! u t o! i r y e!1 q! Component Parts No. 1 Description Body Piston Cam inger Cap End plate Piston bolt Material Aluminum alloy Aluminum alloy Carbon steel Carbon steel Aluminum alloy Stainless steel Stainless steel Note Hard anodized Hard anodized Heat treated, Specially treated Heat treated, Specially treated Hard anodized No Description Magnet Type C retaining ring Piston seal Rod seal Gasket Gasket Cross recessed flat head screw Material Carbon steel NBR NBR NBR NBR Carbon steel Note Phosphate coated Zinc chromated Replacement Parts Description Seal kit inger Cam Piston assembly End plate assembly Cap MHS-1D MHS1-PS P1 P MHS-A MHS-A- MHS-A MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1- MHS-A1 MHS-D MHS-PS P P MHS-A1 MHS-A1- MHS-A1 Order pieces of fingers for one unit. Replacement part/grease pack part no.: MH-G1 ( g) MHS-D MHS-PS P1 P MHS-A1 MHS-A1- MHS-A1 MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1- MHS-A1 MHS-D MHS-PS P1 P MHS-A1 MHS-A1- MHS-A1 MHS-D MHS-PS P1 P MHS-A1 MHS-A1- MHS-A1 Main parts!!1!! r e wui y! t

10 Parallel Type Air Gripper/-inger Type MHS Series Gripping Point The workpiece gripping point distance should be within the gripping force ranges given for each pressure in the effective gripping force graphs below. If operated with the workpiece gripping point beyond the indicated ranges, an excessive offset load will be applied to the sliding section of the fingers, which can have an adverse effect on the service life of the product. If there is an overhang, please consult with SMC. Gripping point Gripping point External grip Internal grip : Gripping point distance Effective Gripping orce Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as, which is the thrust of one finger, when both fingers and attachments are in full contact with the workpiece as shown in the figure below. External Grip MHS-1D Pressure. MPa Internal Grip MHS-1D Pressure. MPa External grip Internal grip. MPa. MPa.MPa. MPa. MPa. MPa 1. MPa 1. MPa MHS-D MHS-D MHS-D MHS-D Pressure. MPa. MPa. MPa. MPa. MPa. MPa. MPa Pressure. MPa Pressure. MPa. MPa. MPa 1 Pressure. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- 1 1

11 MHS Series Effective Gripping orce Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as, which is the thrust of one finger, when both fingers and attachments are in full contact with the workpiece as shown in the figure below. External Grip MHS-D 1 Pressure. MPa Internal Grip MHS-D 1 Pressure. MPa. MPa. MPa. MPa. MPa. MPa. MPa.1 MPa.1 MPa. MPa. MPa 1 1 MHS-D MHS-D Pressure. MPa Pressure. MPa External grip 1 1. MPa. MPa. MPa. MPa 1. MPa. MPa 1. MPa. MPa.1 MPa.1 MPa 1 1 Internal grip MHS-D MHS-D Pressure. MPa. MPa. MPa. MPa. MPa MPa Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa MHS-D MHS-D Pressure. MPa. MPa. MPa. MPa. MPa. MPa. MPa.1 MPa.1 MPa Pressure. MPa. MPa. MPa

12 XA depth XB Parallel Type Air Gripper/-inger Type MHS Series Dimensions MHS-1D to D x ø. through. Counterbore depth SC (Mounting hole) RA AA AB øwa depth 1. RA øva depth VB RB NB NA øb RB O (Open DO) (Closed DC) Q Z Y X x M x. thread depth (Mounting thread) x M x. thread depth TB Thread for mounting attachment CB P (inger opening port) Auto switch mounting groove dimensions ( locations). J Open EO Closed EC K H +. G P (inger closing port) MHS-1D MHS-D MHS-D ø 1 ø. ø MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- MHS-1D MHS-D MHS-D AA AB B CB 1 1 DC DO EC 1 1 EO 1 1 X Y 1 1. Z G 1 J 1 1 K NA 1 NB h -. h -. h -. O. P M x. M x. M x. (mm) Q MHS-1D MHS-D MHS-D RA 1 RB 1 1 SC. 1 TB VA +. H +. H +. H VB WA +. 1H +. 1H +. H XA +. H +. H +. H XB 1

13 XA depth XB MHS Series Dimensions MHS-D/D x øsa through SB counterbore (Mounting hole) AA RA RA AB. øva depth VB øb. Q (Open DO) (Closed DC) CB CA M x. (inger opening port) J Open EO Closed EC h -. RB NA RB x UA thread depth UB (Mounting thread) Z Y X øwa depth x M x. thread depth Thread for mounting attachment 1 G M x. (inger closing port) (mm) MHS-D MHS-D AA AB 1 B CA CB 1 1 DC DO EC 1 EO X. Y.. Z G. 1 J 1 H H NA 1 1 Q RA RB SA.. MHS-D MHS-D SB. UA M x. M x 1 UB 1 VA +. H +. H VB WA +. H +. H XA +. H +. H XB

14 XA depth XB YC Parallel Type Air Gripper/-inger Type MHS Series MHS-D/D x ø.1 through. counterbore depth SC (Mounting hole) RA AC AA AB. RA øva depth VB NB RB NA øb RB O (Open DO) (Closed DC) Q CB CA Z Y X x M x 1 thread depth (Mounting thread) øwa depth WB x M x. thread depth 1 Thread for mounting attachment M x. (inger opening port) Open EO Closed EC MHZ MH J K MH MHS-D MHS-D MHS-D MHS-D AA O. AB Q 1 1 AC RA B RB CA SC 1 CB DC VA +. H +. H 1 M DO VB G EC WA +. H +. H EO M x. (inger closing port) X 1 WB. Y. XA +. H +. H Z G. XB YC. 1 J K 1 H H M NA 1 (mm) NB 1h -. h -. MHR MHK MHS MHC MHT MHY MHS Series Detailed dimensions of mounting portion of end plate ød depth E MHW -X MRHQ C C (E) x A screw depth B ød - (B) MHS-1D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D A M x. M x. B... C ød (mm) E... 1 MA D-

15 Parallel Type Air Gripper/-inger Type MHS Series ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø Bore size ø1 to ø Number of fingers fingers Bore size MHS Bore size 1 1 mm mm mm D MBW Action D Double acting Auto switch Nil Without auto switch (Built-in magnet) or the applicable auto switch model, refer to the table below. Applicable Auto Switches/Refer to pages to for further information on auto switches. Applicable Auto Switches/Refer to pages to for further information on auto switches. Number of auto switches Nil pcs. S 1 pc. Made to Order Refer to page for details. Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) Pre-wired Applicable function entry light (Output) DC AC Perpendicular In-line. (Nil) 1 (M) () (Z) connector load -wire (NPN) V, MNV MN IC -wire (PNP) V MPV MP circuit -wire V MBV MB Diagnosis -wire (NPN) V, MNWV MNW IC Relay, (-color Grommet Yes -wire (PNP) V V MPWV MPW circuit PC indicator) -wire V MBWV MBW -wire (NPN) V, MNAV MNA Water resistant -wire (PNP) V MPAV MBAV MPA (-color indicator) IC circuit -wire V MBA Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. ead wire length symbols:. m Nil (Example) MN Auto switches marked with a symbol are produced upon receipt of order. 1 m M (Example) MNWM m (Example) MN m Z (Example) MNZ Note) When using the -color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Solid state auto switch Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) Pre-wired Applicable function entry light (Output) DC AC Perpendicular In-line. (Nil) 1 (M) () (Z) connector load -wire (NPN) V, MNV MN IC -wire (PNP) V MPV MP circuit -wire V MBV MB Diagnosis -wire (NPN) V, MNWV MNW IC Relay, (-color Grommet Yes -wire (PNP) V V MPWV MPW circuit PC indicator) -wire V MBWV MBW -wire (NPN) V, MNAV MNA Water resistant -wire (PNP) V MPAV MPA (-color indicator) IC circuit -wire V MBAV MBA Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. ead wire length symbols:. m Nil (Example) MNW Auto switches marked with a symbol are produced upon receipt of order. 1 m M (Example) MNWM m (Example) MNW m Z (Example) MNWZ Note 1) When using the -color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Note ) When ordering the air gripper with auto switch, auto switch mounting brackets are supplied with the air gripper having a bore size of ø to ø. Note ) When ordering the auto switch separately, auto switch mounting brackets (BMG-) are required. Solid state auto switch ø to ø MHS Number of fingers fingers Bore size 1 mm mm mm mm mm 1 mm mm How to Order D MBW Action D Double acting Port thread type Symbol Type Cylinder bore Nil M thread ø to ø Rc TN NPT ø to ø T G Number of auto switch Nil pcs. S 1 Made to Order pc. Refer to page for details. n n pcs. Auto switch Nil Without auto switch (Built-in magnet) or the applicable auto switch model, refer to the table below.

16 Parallel Type Air Gripper/-inger Type MHS Series s/specifications Symbol Double acting: Internal grip MHS-1D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-1D MHS-D Cylinder bore size (mm) 1 1 luid Air Operating pressure (MPa). to..1 to. Ambient and fluid temperature ( C) Repeatability (mm) Max. operating frequency (c.p.m.) ubrication Action 1 to ±.1 Not required Double acting Effective gripping External grip 1 1 1, force (N) at. MPa Note 1) Internal grip Opening/Closing stroke (mm) (dia.) Weight (g) ,, 1,, Note 1) Values for ø1 to ø are with gripping point = mm, for ø to ø with gripping point = mm, and for ø to ø with gripping point = mm. Refer to Effective Gripping orce data on pages to for the gripping force at each gripping position. Double acting: External grip Made to Order: Individual Specifications (or details, refer to pages to.) Symbol Specifications/Description -X Single acting (ø1 to ø) Made to Order Click here for details Symbol Specifications/Description -X Heat resistance (1 C) -X luororubber seal -X Without magnet -X EPDM seal/luorine grease -X Axial ported -X luorine grease -X Grease for food processing machines, luorine grease -XA Grease for food processing machines Refer to pages to for the specifications of products with auto switches. Auto switch installation examples and mounting positions Auto switch hysteresis Auto switch mounting Protrusion of auto switch from edge of body MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- A

17 MHS Series Construction! Closed condition w! u t o! Open condition i r y e!1 q! Component Parts No. 1 Description Body Piston Cam inger Cap End plate Piston bolt Material Aluminum alloy Aluminum alloy Carbon steel Carbon steel Aluminum alloy Stainless steel Stainless steel Note Hard anodized Hard anodized Heat treated, Specially treated Heat treated, Specially treated Hard anodized No Description Magnet Type C snap ring Piston seal Rod seal Gasket Gasket Cross recessed flat head screw Material Carbon steel NBR NBR NBR NBR Carbon steel Note Phosphate coated Zinc chromated Replacement Parts Description MHS-1D Seal kit MHS1-PS inger P1 Cam P1 Piston assembly MHS-A End plate assembly MHS-A- Cap MHS-A MHS-D MHS-PS P P MHS-A1 MHS-A1- MHS-A1 MHS-D MHS-PS P P MHS-A1 MHS-A1- MHS-A1 MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1- MHS-A1 MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1- MHS-A1 Main parts!!1!! r e wui y! t Description Seal kit inger Cam Piston assembly End plate assembly Cap MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1- MHS-A1 MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1- MHS-A1 MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1- MHS-A1 MHS-1D MHS1-PS P1 P1 MHS-A MHS-A- MHS-A MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1- MHS-A1 Main parts!!1!! r e wui y! t Order pieces of fingers for one unit. Replacement part/grease pack part no.: MH-G1 ( g)

18 Parallel Type Air Gripper/-inger Type MHS Series Gripping Point The workpiece gripping point distance should be within the gripping force ranges given for each pressure in the effective gripping force graphs below. If operated with the workpiece gripping point beyond the indicated ranges, an excessive offset load will be applied to the sliding section of the fingers, which can have an adverse effect on the service life of the product. Gripping point Gripping point Effective Gripping orce External grip : Gripping point distance Internal grip Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as, which is the thrust of one finger when all of the fingers and attachments are in full contact with the workpiece as shown in the figure below. External Gripping orce Internal Gripping orce MHS-1D MHS-1D Pressure. MPa Pressure. MPa. MPa. MPa 1 1. MPa. MPa 1 1. MPa. MPa. MPa. MPa External grip MHS-D MHS-D Pressure. MPa. MPa. MPa 1. MPa 1. MPa Pressure. MPa. MPa. MPa. MPa 1. MPa 1 MHZ MH MH MHR MHK MHS MHC Internal grip MHS-D MHS-D Pressure. MPa Pressure. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa 1 1 MHT MHY MHW -X MRHQ MA D- 1 1

19 MHS Series Effective Gripping orce Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as, which is the thrust of one finger when all of the fingers and attachments are in full contact with the workpiece as shown in the figure below. External Gripping orce Internal Gripping orce MHS-D MHS-D 1 Pressure. MPa Pressure. MPa 1. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa.1 MPa.1 MPa 1 1 MHS-D MHS-D External grip Pressure. MPa 1 Pressure. MPa 1. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa.1 MPa.1 MPa 1 1 Internal grip MHS-D MHS-D Pressure. MPa Pressure. MPa. MPa. MPa. MPa 1. MPa 1. MPa. MPa 1 1. MPa. MPa.1 MPa.1 MPa 1 1 MHS-D MHS-D Pressure. MPa. MPa. MPa. MPa. MPa 1.1 MPa 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa 1 1

20 Parallel Type Air Gripper/-inger Type MHS Series External Gripping orce Internal Gripping orce MHS-D MHS-D Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa 1 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa MHS-1D MHS-1D 1, 1, Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa 1 MHS-D MHS-D 1, 1, Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa 1 1, Pressure. MPa 1, Pressure. MPa 1, 1,. MPa 1,. MPa 1, 1,. MPa. MPa 1,. MPa. MPa. MPa. MPa.1 MPa.1 MPa 1 1 MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D-

21 MHS Series Dimensions MHS-1D to D CB P (inger opening port) P (inger closing port) øwa depth 1. x M x. thread depth TB Thread for mounting attachment AA AB øva depth VB. Q O (Open DO) (Closed DC) Open EO Closed EC øb X Y Z J K XA depth XB NB NA x øsa through SB counterbore depth SC P.C.D.R (Mounting hole) H +. G x UA thread depth UB P.C.D.R (Mounting thread) Auto switch mounting groove dimentions ( locations) MHS-1D MHS-D MHS-D ø ø. ø (mm) MHS-1D MHS-D MHS-D AA AB B CB 1 1 DC DO 1 EC EO 1 X Y 1 1. Z G J 1 1 K NA 1 NB h -. h -. h -. O. P M x. M x. M x. Q R MHS-1D MHS-D MHS-D SA... SB.. SC. 1 TB UA M x. M x. M x. UB. VA +. H +. H +. H VB WA +. 1H +. 1H +. H XA +. H +. H +. H XB

22 Parallel Type Air Gripper/-inger Type MHS Series MHS-D to D CB CA P (inger opening port) x TA thread depth TB Thread for mounting attachment AC AA AB P (inger closing port) øva depth VB. øwa depth WB O (Open DO) (Closed DC) Open EO Closed EC øb X MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D AA O... NB NA AB 1 AC P M x. M x. M x. M x. Rc 1/ (G 1/, NPT 1/) Q x øsa through SB counterbore depth SC P.C.D.R (Mounting hole) Auto switch mounting groove dimensions ( locations) 1. Y B 1 Q 1 1 CA 1. R CB 1 1 SA..... DC 1. SB.. 1 J SC 1 1 K DO 1 1. M EC TA M x. M x. M x. M x. M x 1 EO TB 1 1 G X. 1. Y UA M x. M x. M x. M x 1 M x 1 Z UB. 1 G.. VA +. H +. H +. H +. H +. H VB Y Z K M H +. H +. 1 H +. H +. H +. WA WB XA H H H H H H H. H H H J 1 XA depth XB x UA thread depth UB P.C.D.R (Mounting thread) NA XB (mm) NB h -. h -. 1h -. h -. 1h -. Y. MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- 1

23 MHS Series Dimensions MHS-1D/D CB CA P (inger opening port) P (inger closing port) x TA thread depth TB Thread for mounting attachment AC AA AB øva depth VB. øwa depth WB øb Open EO Closed EC X NB NA O Q (Open DO) (Closed DC) x øsa through SB counterbore depth SC P.C.D.R (Mounting hole) J K M G Y Z XA depth XB x UA thread depth UB P.C.D.R (Mounting thread) Auto switch mounting groove positions ( locations) MHS-1D MHS-D MHS-1D MHS-D MHS-1D MHS-D AA O. 1. AB AC P Rc 1/ (G 1/, NPT 1/) Rc / (G /, NPT /) B 1 1 Q 1 CA 1. R 1 CB. SA DC SB 1 1. DO SC 1 EC EO TA M x 1. M1 x 1. X TB 1 Y Z 1 UA M x 1. M1 x 1. G 1 1 UB VA +. 1 H +. 1H J VB K 1 1 H 1H WA +. H +.1 1H WB M NA XA H 1H (mm) NB 1h -. h -. XB

24 Parallel Type Air Gripper/-inger Type MHS Series MHS Series Detailed Dimensions of Mounting Portion of End Plate x A screw depth B P.C.D. C ød depth E MHZ MH (B) MH MHR ød MHK (E) MHS MHC - MHT MHY MHW MHS-1D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-1D MHS-D A M x. M x. M x. B.... C ød +. 1H 1H +. H +. H +. 1H +. H +. H +. H +. H +. H +. (mm) E X MRHQ MA D-

25 Parallel Type Air Gripper -inger Type with Dust Cover MHSJ Series ø1, ø, ø, ø, ø, ø, ø, ø How to Order With dust cover MHSJ D MBW Made to Order Refer to page for details. Number of fingers fingers Number of auto switches Nil pcs. S 1 pc. Bore size 1 1 mm mm mm mm mm mm mm mm Port thread type Symbol Type Cylinder bore Nil M thread ø1 to ø Rc TN NPT ø T G Dust cover type Nil Chloroprene rubber (CR) luororubber (KM) S Silicone rubber Action D Double acting Auto switch Nil Without auto switch (Built-in magnet) or the applicable auto switch model, refer to the table below. Applicable Auto Switches/Refer to pages to for further information on auto switches. Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) Pre-wired Applicable function entry light (Output) DC AC Perpendicular In-line. (Nil) 1 (M) () (Z) connector load -wire (NPN) -wire (PNP) -wire V, V V MNV MPV MBV MN MP MB IC circuit Diagnosis -wire (NPN) V, MNWV MNW IC Relay, (-color Grommet Yes -wire (PNP) V V MPWV MPW circuit PC indicator) -wire V MBWV MBW -wire (NPN) V, MNAV MNA IC Water resistant -wire (PNP) V MPAV MPA circuit (-color indicator) -wire V MBAV MBA Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. ead wire length symbols:. m Nil (Example) MNW Auto switches marked with a symbol are produced upon receipt of order. 1 m M (Example) MNWM m (Example) MNW m Z (Example) MNWZ Note) When using the -color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Solid state auto switch A

26 Parallel Type Air Gripper -inger Type with Dust Cover MHSJ Series s/specifications Symbol Cylinder bore size (mm) luid Operating pressure (MPa) MHSJ-1D 1 MHSJ-D. to. MHSJ-D MHSJ-D Air MHSJ-D MHSJ-D.1 to. MHSJ-D MHSJ-D Ambient and fluid temperature ( C) Repeatability (mm) Max. operating frequency (c.p.m.) ubrication 1 to ±.1 Not required Action Double acting Effective gripping External grip 1 1 force (N) at. MPa Note 1) Internal grip Opening/Closing stroke (mm) (dia.) Weight (g) , 1 1,, Note 1) Values for ø1 to ø are with gripping point = mm, for ø to ø with gripping point = mm, and for ø with gripping point = mm. Refer to Effective Gripping orce data on pages to for the gripping force at each gripping position. Double acting: Internal grip Double acting: External grip Made to Order Click here for details Symbol Specifications/Description -X Heat resistance (1 C) -X luororubber seal -X Without magnet -X EPDM seal/luorine grease -X Axial ported -X luorine grease -XA Dust cover adhesion -XB Dust cover adhesion (inger part only) -XA Dust cover caulking -XB Dust cover caulking (inger part only) -X Grease for food processing machines, luorine grease -XA Grease for food processing machines Refer to pages to for the specifications of products with auto switches. Auto switch installation examples and mounting positions Auto switch hysteresis Auto switch mounting Protrusion of auto switch from edge of body MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- A

27 MHSJ Series Construction Closed condition i! w t!1 ø1 to ø Open condition! q! u!!! r y e! o ø to ø Open condition! Component Parts No. 1 Description Body Piston Cam inger Cap End plate Guide Magnet Material Note Aluminum alloy Hard anodized ø1 to ø: Stainless steel ø to ø: Aluminum alloy Hard anodized Carbon steel Heat treated, Specially treated Carbon steel Heat treated, Specially treated Aluminum alloy Hard anodized Stainless steel Aluminum alloy Hard anodized No Description Hexagon socket head bolt Parallel pin Type C retaining ring Gasket Gasket Piston seal Rod seal Dust cover Cross recessed flat head screw Material Carbon steel Stainless steel Carbon steel NBR NBR NBR NBR CR/KM/Si Carbon steel Note Zinc chromated Nickel plated Zinc chromated Replacement Parts Seal kit Dust cover inger Cam (J) Description Material Piston assembly End plate assembly Cap CR KM Silicone rubber MHSJ-1D MHSJ1-PS MHSJ-J1 MHSJ-J1 MHSJ-J1S P1 P1 MHS-A1 MHSJ-A MHSJ-A MHSJ-D MHSJ-PS MHSJ-J MHSJ-J MHSJ-JS P P MHS-A MHSJ-A1 MHSJ-A1 MHSJ-D MHSJ-PS MHSJ-J MHSJ-J MHSJ-JS P P MHS-A MHSJ-A1 MHSJ-A1 MHSJ-D MHSJ-PS MHSJ-J MHSJ-J MHSJ-JS P1 P1 MHS-A MHSJ-A1 MHSJ-A1 Main parts!!!!! r e wi y! t A Description MHSJ-D Seal kit MHSJ-PS Dust cover inger Cam (J) Piston assembly CR KM Silicone rubber MHSJ-J MHSJ-J MHSJ-JS P1 P1 MHS-A End plate assembly Cap MHSJ-A1 MHSJ-A1 Order pieces of fingers for one unit. Replacement part/grease pack part no.: MH-G1 ( g) Material MHSJ-D MHSJ-PS MHSJ-J MHSJ-J MHSJ-JS P1 P1 MHS-A MHSJ-A1 MHSJ-A1 MHSJ-D MHSJ-PS MHSJ-J MHSJ-J MHSJ-JS P1 P1 MHS-A MHSJ-A1 MHSJ-A1 MHSJ-D MHSJ-PS MHSJ-J MHSJ-J MHSJ-JS P1 P1 MHS-A MHSJ-A1 MHSJ-A1 Main parts!!!!! r e wi y! t

28 Parallel Type Air Gripper -inger Type with Dust Cover MHSJ Series Gripping Point The workpiece gripping point distance should be within the gripping force ranges given for each pressure in the effective gripping force graphs below. If operated with the workpiece gripping point beyond the indicated ranges, an excessive offset load will be applied to the sliding section of the fingers, which can have an adverse effect on the service life of the product. Gripping point Gripping point Effective Gripping orce External grip Internal grip : Gripping point distance Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as, which is the thrust of one finger when all of the fingers and attachments are in full contact with the workpiece as shown in the figure below. External grip Internal grip External Gripping orce Internal Gripping orce MHSJ-1D MHSJ-1D 1 Pressure. MPa 1. MPa. MPa. MPa. MPa Pressure. MPa. MPa 1. MPa 1. MPa. MPa MHSJ-D MHSJ-D Pressure. MPa. MPa. MPa 1. MPa 1. MPa Pressure. MPa. MPa. MPa. MPa 1. MPa MHSJ-D MHSJ-D Pressure. MPa. MPa. MPa. MPa. MPa 1 Pressure. MPa. MPa. MPa. MPa. MPa 1 MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- 1 1

29 MHSJ Series Effective Gripping orce Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as, which is the thrust of one finger when all of the fingers and attachments are in full contact with the workpiece as shown in the figure below. External Gripping orce Internal Gripping orce MHSJ-D MHSJ-D 1 Pressure. MPa 1 Pressure. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa.1 MPa.1 MPa 1 1 MHSJ-D MHSJ-D External grip 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa 1 1 Internal grip MHSJ-D MHSJ-D 1 1. MPa. MPa.1 MPa Pressure. MPa. MPa. MPa 1 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa 1 1 MHSJ-D MHSJ-D 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa 1 1

30 Parallel Type Air Gripper -inger Type with Dust Cover MHSJ Series External Gripping orce Internal Gripping orce MHSJ-D MHSJ-D Pressure. MPa Pressure. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa 1.1 MPa 1.1 MPa MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D-

31 ø ø ø MHSJ Series Dimensions MHSJ-1D to D x M x. thread depth TB Thread for mounting attachment P (inger opening port) CB CA X x M x. thread depth P.C.D.R (Mounting thread) SD SD NB O Q (Open DO) (Closed DC) øha Open EO Closed EC J K (Counterbore depth ) (Counterbore dia. SB) A H +. x ø. through SB Counterbore depth (See section SD-SD) P.C.D.R (Mounting hole) AD AE AA øb øhb P (inger closing port) +. øh depth øwa depth 1. ( x ø.) Section SD - SD Auto switch mounting groove dimensions ( locations) MHSJ-1D MHSJ-D MHSJ-D. MHSJ-1D MHSJ-D MHSJ-D AA AD 1 1 AE A B CA. CB DC 1.. DO 1.. EC.. EO. 1. X 1 1 HA HB J 1 1 K NB h -. h -. h -. O. P M x. M x. M x. (mm) Q MHSJ-1D MHSJ-D MHSJ-D R SB.. TB WA +. 1H +. 1H +. H

32 Parallel Type Air Gripper -inger Type with Dust Cover MHSJ Series MHSJ-D to D x TA thread depth TB Thread for mounting attachment CB CA P (inger opening port) x UA thread depth UB P.C.D.R (Mounting thread) X x YA thread depth YB P.C.D.R SD SD O Q (Open DO) (Closed DC) øha Open EO Closed EC J NB x øsa through SB Counterbore depth SC (See section SD-SD) P.C.D.R (Mounting hole) K M AC AD AE AA øb øhb P (inger closing port) øva depth VB øwa depth WB A (Counter boredepth SC) 1 MHSJ-D MHSJ-D MHSJ-D MHSJ-D MHSJ-D MHSJ-D MHSJ-D MHSJ-D MHSJ-D MHSJ-D (Counterbore dia. SB) ( x øsa) Section SD - SD AA 1 1 O... AC AD 1 P M x. M x. M x. M x. Rc 1/ (G 1/, NPT 1/) Auto switch mounting groove dimensions ( locations) MHSJ-D MHSJ-D MHSJ-D AE Q 1 1 MHSJ-D ø A R B 1 SA ø CA SB. CB SC DC 1. 1 DO. TA M x. M x. M x. M x. M x 1 EC TB 1 1 EO UA M x. M x. M x 1 M x 1. M x 1. X ø HA HB 1 1 UB VA +. 1 H +. 1 H +. H +. 1 H +. 1 H. J 1 VB H H H H H WA +. H +. H +. H +. H +. H K 1 MHSJ-D ø WB. M ø (mm) NB h -. h -. 1h -. h -. 1h -. YA M x. M x. M x. M x 1 M x 1 YB 1 MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- 1

33 Parallel Type Air Gripper -inger Type Through-hole Type MHSH Series ø1, ø, ø, ø, ø, ø, ø, ø Solid state auto switch MHSH D MHSH Through-hole Number of fingers fingers A A mm mm mm mm mm MBW MBW Through-hole Dust cover Number of auto switches Number of Nil None fingers Center pusher Nil pcs. Made to Order J With dust cover S 1 pc. Refer to page for details. fingers Nil Without center pusher n Note) ø1, ø and ø are not A Cylinder type n pcs. Note) Symbol entry examples when mounting auto available with dust cover. Port thread type B Spring type switches on air gripper with cylinder type Symbol Type Cylinder bore Note) ø1, ø and ø are not center pusher Bore size M thread ø1 to ø available with center pusher. 1. Air gripper unit 1 pc. 1 1 mm mm Nil Center pusher unit 1 pc. } Total of pcs. Nil Rc Dust cover type MHSH-DA-MN mm mm TN NPT ø (with dust cover only). Air gripper unit pcs. Center pusher unit pcs. }Total of pcs. Enter mm mm T G Nil Chloroprene rubber (CR) MHSH-DA-MN mm mm Action luororubber (KM) Auto switch S Silicone rubber D Double acting Nil Without auto switch (Built-in magnet) Applicable Auto Switches /Refer to pages to for further information on auto switches. or the applicable auto switch model, refer to the table below. Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) Pre-wired Applicable function entry light (Output) DC AC Perpendicular In-line. (Nil) 1 (M) () (Z) connector load -wire (NPN) -wire (PNP) -wire V, V V MNV MPV MBV MN MP MB IC circuit -wire (NPN) V, MNWV MNW IC Diagnostic Relay, Grommet Yes -wire (PNP) V V (-color indicator) MPWV MPW circuit PC -wire V MBWV MBW -wire (NPN) V, MNAV MNA Water resistant (-color indicator) -wire (PNP) V MPAV MPA IC circuit -wire V MBAV MBA Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. ead wire length symbols:. m Nil (Example) MNW Auto switches marked with a symbol are produced upon receipt of order. 1 m M (Example) MNWM Note) When using the -color indicator type, please make the setting so that the indicator m (Example) MNW is lit in red to ensure the detection at the proper position of the air gripper. m Z (Example) MNWZ A Center pusher assembly Center pusher assembly Center pusher A Cylinder type B Spring type Applicable Auto Switches /Refer to pages to for further information on auto switches. Solid state auto switch Bore size How to Order Number of auto switches Nil pcs. S 1 pc. Made to Order Refer to page for details. Auto switch (Cylinder type only) Nil Without auto switch (Built-in magnet) or the applicable auto switch model, refer to the table below. Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) Pre-wired Applicable function entry light (Output) DC AC Perpendicular In-line. (Nil) 1(M) () (Z) connector load -wire (NPN) -wire (PNP) -wire V, V V MNV MPV MBV MN MP MB IC circuit -wire (NPN) V, MNWV MNW IC Diagnostic Relay, Grommet Yes -wire (PNP) V V (-color indicator) MPWV MPW circuit PC -wire V MBWV MBW -wire (NPN) V, MNAV MNA IC Water resistant (-color indicator) -wire (PNP) V MPAV MPA circuit -wire V MBAV MBA Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. ead wire length symbols:. m Nil (Example) MNW Auto switches marked with a symbol are produced upon receipt of order. 1 m M (Example) MNWM Note) When using the -color indicator type, please make the setting so that the indicator m (Example) MNW is lit in red to ensure the detection at the proper position of the air gripper. m Z (Example) MNWZ

34 Parallel Type Air Gripper -inger Type Through-hole Type MHSH Series /Specifications Without center pusher Center pusher/cylinder type Center pusher/spring type Air Gripper Specifications MHSH-1D MHSH-D MHSH-D MHSH-D MHSH-D MHSH-D MHSH-D MHSH-D Cylinder bore size (mm) 1 luid Air Operating pressure (MPa). to..1 to. Ambient and fluid temperature ( C) Repeatability (mm) 1 to ±.1 Max. operating frequency (c.p.m.) ubrication Action Not reguired Double acting Effective gripping force (N) (Note 1) External hold 1 1 at. MPa Internal hold 1 1 Through hole diameter (mm) +. øh1 +. øh1 +. øh1 +. øh1 +. ø1h1 +. øh1 +. ø1h1 +. øh1 Opening/Closing stroke (dia.) (mm) Weight (g) ,, Note 1) Values for ø1 to ø are with gripping point = mm, for ø to ø with gripping point = mm, and for ø with gripping point = mm. Refer to Effective Gripping orce data on pages to for the gripping force at each gripping position. Symbol Center Pusher (Cylinder type) Specifications MHSH-DA MHSH-DA MHSH-DA MHSH-DA MHSH-DA Double acting: Double acting: Internal grip External grip Pusher cylinder bore size (mm) luid Operating pressure (MPa) Ambient and fluid temperature ( C). to. Air.1 to. 1 to Pusher maximum operating frequency (c.p.m.) Made to Order Click here for details ubrication Action Not reguired Double acting Symbol Specifications/Description Pusher stroke (mm) X Heat resistance (1 C) Pusher thrust (N) -X luororubber seal at. MPa Extention 1 -X Without magnet Weight (g) 1,,, -X EPDM seal/luorine grease -X Axial ported Center Pusher (Spring type) Specifications -X luorine grease MHSH-DB MHSH-DB MHSH-DB MHSH-DB MHSH-DB -XA -XB -XA -XB -X Dust cover adhesion Dust cover adhesion (inger part only) Dust cover caulking Dust cover caulking (inger part only) Grease for food processing machines, luorine grease Pusher stroke (mm) Pusher spring force (N) Weight (g) Weight to 1 ø to 1 ø 1 to 1, ø 1 to, ø 1 to, ø -XA Grease for food processing machines Through-hole with dust cover MHSHJ-D 1, 1,1, Refer to pages to for the specifications of products with auto switches. Auto switch installation examples and mounting positions Auto switch hysteresis Auto switch mounting Protrusion of auto switch from edge of body Center pusher (cylinder type) with dust cover MHSHJ-DA Center pusher (spring type) with dust cover MHSHJ-DB 1, 1,..1,. MHZ MH MH MHR MHK MHS A MHC MHT MHY MHW -X MRHQ MA D-

35 MHSH Series Construction Closed condition ø1 to ø Open condition q! o! t!!! w! ø to ø Open condition i!1 r y u e!!! Component Parts No. 1 1 Description Body Piston Cam (A) inger Cap (A) End plate (A) Tubing Guide Magnet Hexagon socket head bolt Parallel pin Type C retaining ring Material Aluminum alloy ø1 to ø: Stainless steel ø to ø: Aluminum alloy Carbon steel Carbon steel Aluminum alloy Stainless steel Stainless steel Aluminum alloy Carbon steel Stainless steel Carbon steel Note Hard anodized Hard anodized Heat treated, Specially treated Heat treated, Specially treated Hard anodized Hard anodized Zinc chromated Nickel plated No !! Description Material Gasket NBR Gasket NBR Gasket NBR Piston seal NBR Rod seal NBR Rod seal NBR Dust cover CR/KM/Si Note Replacement Parts Description Seal kit Dust cover inger Cam (A) Material Piston assembly Cap CR KM Silicone rubber MHSH-1D MHSH1-PS P1 P1 MHS-A1 MHSH-A MHSH-D MHSH-PS P P MHS-A MHSH-A1 MHSH-D MHSH-PS P P MHS-A MHSH-A1 MHSH-D MHSHJ-D MHSH-PS MHSHJ-J MHSHJ-J MHSHJ-JS P1 P1 MHS-A MHSH-A1 Main parts!!!!!!! r e wo t MHSH-D Description MHSHJ-D Seal kit MHSH-PS Dust cover inger Cam (A) CR KM Silicone rubber MHSHJ-J MHSHJ-J MHSHJ-JS P1 P1 Piston assembly Cap MHS-A MHSH-A1 Order pieces of fingers for one unit. Material Replacement part/grease pack part no.: MH-G1 ( g) A MHSH-D MHSHJ-D MHSH-PS MHSHJ-J MHSHJ-J MHSHJ-JS P1 P1 MHS-A MHSH-A1 MHSH-D MHSHJ-D MHSH-PS MHSHJ-J MHSHJ-J MHSHJ-JS P1 P1 MHS-A MHSH-A1 MHSH-D MHSHJ-D MHSH-PS MHSHJ-J MHSHJ-J MHSHJ-JS P1 P1 MHS-A MHSH-A1 Main parts!!!!!!! r e wo t

36 Parallel Type Air Gripper -inger Type Through-hole Type MHSH Series Construction Center pusher/cylinder type r t y! o u! e o w!1 q! i Component Parts No. Description 1 Push holder (P) Piston (P) Rod holder Bumper Push rod (P) Rubber magnet Hexagon socket head bolt Type C retaining ring Steel balls 1 Gasket Gasket Piston seal 1 Rod seal Material Aluminum alloy Aluminum alloy Aluminum alloy Urethane rubber Stainless steel Synthetic rubber Carbon steel Carbon steel Stainless steel NBR NBR NBR NBR Note Hard anodized Hard anodized Hard anodized Hard chromed Zinc chromated Nickel plated Replacement Parts: Seal Kit (Center pusher/cylinder type) Part no. MHSH-AA MHSH-AA MHSH-AA MHSH-AA MHSH-AA Description MHZ MH MHSHA-PS MHSHA-PS MHSHA-PS MHSHA-PS MHSHA-PS A set of the above nos.!,!1,! &! MH MHR Seal kits are sets consisting of items!,!1,! and!, and can be ordered using the kit number for each cylinder bore size. Replacement part/grease pack part no.: MH-G1 ( g) Construction Center pusher/spring type MHK MHS MHC MHT MHY w q u t i r y e Component Parts No. Description 1 Push holder (S) Cap (S) Spring holder Spring Push rod (S) Hexagon socket head bolt Hexagon socket head bolt Type C retaining ring Material Aluminum alloy Stainless steel Stainless steel Stainless steel Stainless steel Carbon steel Carbon steel Carbon steel Note Hard anodized Hard chromed Zinc chromated Zinc chromated Nickel plated MHW -X MRHQ MA D-

37 MHSH Series Gripping Point The workpiece gripping point distance should be within the gripping force ranges given for each pressure in the effective gripping force graphs below. If operated with the workpiece gripping point beyond the indicated ranges, an excessive offset load will be applied to the sliding section of the fingers, which can have an adverse effect on the service life of the product. Gripping point Gripping point External grip Internal grip : Gripping point distance Effective Gripping orce Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as, which is the thrust of one finger when all of the fingers and attachments are in full contact with the workpiece as shown in the figure below. External Gripping orce MHSH-1D Internal Gripping orce MHSH-1D 1 1 Pressure. MPa. MPa. MPa. MPa. MPa 1 1 Pressure. MPa. MPa. MPa. MPa. MPa External grip MHSH-D MHSH-D 1 1 Pressure. MPa. MPa. MPa. MPa. MPa 1 1 Pressure. MPa. MPa. MPa. MPa. MPa Internal grip MHSH-D MHSH-D Pressure. MPa 1 Pressure. MPa. MPa. MPa. MPa. MPa 1. MPa. MPa. MPa. MPa 1 1

38 Parallel Type Air Gripper -inger Type Through-hole Type MHSH Series Effective Gripping orce Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as, which is the thrust of one finger when all of the fingers and attachments are in full contact with the workpiece as shown in the figure below. External Gripping orce Internal Gripping orce MHSH-D MHSH-D 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa External grip MHSH-D 1 MHSH-D Internal grip MHSH-D 1 1 Pressure. MPa 1 1. MPa. MPa.1 MPa. MPa. MPa. MPa. MPa.1 MPa Pressure. MPa. MPa. MPa 1 MHSH-D MPa. MPa.1 MPa Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa Pressure. MPa. MPa. MPa MHZ MH MH MHR MHK MHS MHC MHT MHY MHW MHSH-D 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa MHSH-D 1 Pressure. MPa. MPa. MPa. MPa.MPa.1 MPa -X MRHQ MA D- 1 1

39 MHSH Series Effective Gripping orce Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as, which is the thrust of one finger when all of the fingers and attachments are in full contact with the workpiece as shown in the figure below. External Gripping orce MHSH-D Internal Gripping orce MHSH-D Pressure. MPa Pressure. MPa 1. MPa. MPa. MPa. MPa.1 MPa 1. MPa. MPa. MPa. MPa.1 MPa External grip Internal grip Effective Thrust of Center Pusher Cylinder Type Note) Spring Type MHSH-DA MHSH-DB PA PA: Pusher thrust Pusher thrust (N) PA Spring force (N) 1 PB PB 1 PB: Spring force Supply pressure (MPa) MHSH-DA 1 1 Pusher stroke (mm) MHSH-DB 1 Pusher thrust (N) 1 PA Spring force (N) PB Supply pressure (MPa) Pusher stroke (mm) Note) The thrust of the cylinder type is on extension of the push rod.

40 Parallel Type Air Gripper -inger Type Through-hole Type MHSH Series Effective Thrust of Center Pusher Cylinder Type Note) MHSH-DA Spring Type MHSH-DB PA PB PA: Pusher thrust PB: Spring force PB Pusher thrust (N) 1 1 MHSH-DA Pusher thrust (N) 1 PA Supply pressure (MPa) PA Pusher thrust (N) Spring force (N) 1 MHSH-DB 1 1 Pusher stroke (mm) PB MHZ MH MHSH-DA Supply pressure (MPa) MHSH-DB Pusher stroke (mm) MH MHR PB MHK Pusher thrust (N) 1 PA Spring force (N) 1 MHS MHC MHT MHY Supply pressure (MPa) Pusher stroke (mm) MHW Note) The thrust of the cylinder type is on extension of the push rod. -X MRHQ MA D-

41 ø ø ø MHSH Series Dimensions MHSH-1D to D x M x., thread depth TB Thread for mounting attachment P (inger opening port) CB CA X x M x., thread depth P.C.D.R (Mounting thread) O (Open DO) (Closed DC) Open EO Closed EC øba øbb øbc øh +. depth Q J K øza øwa, depth 1. NB BD NA G x ø. through, SB counterbore depth P.C.D.R (Mounting hole) AC AD AE AA H +. P (inger closing port) Auto switch mounting groove dimensions ( locations) MHSH-1D MHSH-D MHSH-D. MHSH-1D MHSH-D MHSH-D AA AC AD 1. 1 AE. BA BB... BC BD CA. CB DC 1.. DO 1.. EC.. EO. 1. X 1 1 G J 1 1 K NA 1 (mm) NB h -. h -. h -. MHSH-1D MHSH-D MHSH-D O. P M x. M x. M x. Q R SB.. TB WA +. 1H +. 1H +. H ZA +. H1 +. H1 +. H1 1

42 Parallel Type Air Gripper -inger Type Through-hole Type MHSH Series MHSH-D to D x TA, thread depth TB x øsa through, SB, counterbore depth SC P.C.D.R (Mounting hole) CB CA P (inger opening port) x UA thread depth UB P.C.D.R X x YA, thread depth YB P.C.D.R øzb Q O (Open DO) (Closed DC) Open EO Closed EC J K ZC øba øbb øbc øza øva depth VB øwa depth WB NA NB M AC AD BD G AE P (inger closing port) AA Auto switch mounting groove dimensions ( locations) MHSH-D MHSH-D MHSH-D 1 MHSH-D MHSH-D MHSH-D MHSH-D MHSH-D MHSH-D MHSH-D MHSH-D MHSH-D MHSH-D AA 1 1 AC 1 1 P M x. M x. M x. M x. Rc 1/ (G 1/, NPT 1/) MHSH-D AD Q 1 1 AE.. 1. R ø BA 1 SA ø BB SB. BC SC BD CA TA M x. M x. M x. M x. M x 1 CB TB 1 1 DC 1. 1 DO. UA M x. M x. M x 1 M x 1. M x 1. EC UB ø EO VA +. H +. H +. H +. H +. H X. G.. 1 VB WA +. H +. H +. H +. H +. H MHSH-D J 1 WB. K 1 H H H H H YA M x. M x. M x. M x 1 M x 1 ø YB 1 ø M ZA +. H1 +. 1H1 +. H1 +. 1H1 +. H1 NA NB 1 h -. 1 h h -. h -. 1h -. ZB ZC 1 1 (mm) O... MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D-

43 MHSH Series Dimensions: Center Pusher/Cylinder Type MHSH-DA to DA Pusher extended Z Pusher retracted ZG Thread depth UD M x. (Pusher retraction port) x UC CC X CC øzd ZE... øbe øb øbg ZJ øva depth VB ZH, thread depth Z AJ AH AG (A) M x. (Pusher extension port) Center pusher auto switch mounting groove dimensions ( locations) MHSH-DA MHSH-DA MHSH-DA ø ø ø... 1 MHSH-DA MHSH-DA ø ø Note) or dimensions, refer to the MHSH- to D dimensions on page. MHSH-DA MHSH-DA MHSH-DA MHSH-DA MHSH-DA A AG AH 1 1 AJ 1 1 BE B h -. h -. h -. h -. h -. BG CC X UC M x. M x. M x 1 M x 1. M x 1. UD UE..... VA +. H +. H +. H +. H +. H VB ZD 1 1 ZE Z 1 1 ZG ZH M x. M x. M x 1 M x 1. M1 x 1. Z 1 1 (mm) ZJ..

44 Parallel Type Air Gripper -inger Type Through-hole Type MHSH Series Dimensions: Center Pusher/Spring Type MHSH-DB to DB Thread depth UD Pusher extended Z Pusher retracted ZG x UC x øue X øzd ZE øbe øb øbg ZJ øva depth VB ZH, thread depth Z AJ AH AG (A) øwc depth WD MHZ øb øbg MH AH A MHSH-DB, DB MH MHR MHK MHS MHC Note) or dimensions, refer to the MHSH- to D dimensions on page. MHT MHSH-DB MHSH-DB MHSH-DB MHSH-DB MHSH-DB MHSH-DB MHSH-DB MHSH-DB MHSH-DB MHSH-DB A 1 1 AG 1 ZH M x. M x. M x 1 M x 1. M1 x 1. AH 1 1 Z 1 1 AJ 1 1 ZJ.. BE B h -. h -. h -. h -. h -. BG X UC M x. M x. M x 1 M x 1. M x 1. UD UE..... VA +. H +. H +. H +. H +. H VB WC WD ZD 1 1 ZE Z 1 1 (mm) ZG MHY MHW -X MRHQ MA D- 1

45 MHSH Series Dimensions: Through-hole with Dust Cover MHSHJ-D to D x TA thread depth TB Thread for mounting attachment CB CA P (inger opening port) x UA thread depth UB P.C.D.R (Mounting thread) X x YA, thread depth YB P.C.D.R SD SD O Q (Open DO) (Closed DC) øha Open EO Closed EC NB M x øsa, through SB, counterbore depth SC (See section SD-SD) AC AD AE P.C.D.R (Mounting hole) AA J K øb øhb øza P (inger closing port) øva depth VB øwa depth WB A Counterbore depth SC (Counterbore dia. SB) MHSHJ-D Auto switch mounting groove dimensions ( locations) ø MHSHJ-D ø. MHSHJ-D ø ( x øsa) Section SD - SD MHSHJ-D MHSHJ-D 1 ø ø MHSHJ-D MHSHJ-D MHSHJ-D MHSHJ-D MHSHJ-D AA 1 1 AC AD 1 AE A B 1 CA CB DC 1. 1 DO. EC EO X HA HB 1 1 J 1 K 1 H H H H H M h h 1h h 1h (mm) NB MHSHJ-D MHSHJ-D MHSHJ-D MHSHJ-D MHSHJ-D 1 O... P M x. M x. M x. M x. Rc1/(G1/, NPT1/) Q 1 1 R SA SB. SC TA M x. M x. M x. M x. M x 1 TB 1 1 UA M x. M x. M x 1 M x 1. M x 1. UB VA +. H +. H +. H +. H +. H VB WA +. H +. H +. H +. H +. H WB. YA M x. M x. M x. M x 1 M x 1 YB 1 ZA +. H1 +. 1H1 +. H1 +. 1H1 +. H1

46 Parallel Type Air Gripper -inger Type Through-hole Type MHSH Series Dimensions: Center Pusher with Dust Cover/Cylinder Type MHSHJ-DA to DA ZH, thread depth Z Pusher extended Z Pusher retracted ZG x UC Thread depth UD x øue M x. (Pusher retraction port) X CC CC øzd ZE øbe øb øbg ZJ øva depth VB AJ AH AG (A) M x. (Pusher extension port) MHSHJ-DA MHSHJ-DA MHSHJ-DA MHSHJ-DA MHSHJ-DA A AG AH 1 1 AJ 1 1 BE B h -. h -. h -. h -. h -. BG CC X UC M x. M x. M x 1 M x 1. M x 1. UD UE VA +.. H +.. H +.. H +.. H +.. H Note) or dimensions, refer to the MHSHJ- to D dimensions on page 1. or auto switch mounting groove, refer to MHSH- to DA on page. VB ZD 1 1 ZE Z ZG ZH M x. M x. M x 1 M x 1. M1 x 1. Z 1 1 (mm) ZJ.. MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- 1

47 MHSH Series Dimensions: Center Pusher with Dust Cover/Spring Type MHSHJ-DB to DB Thread depth UD ZH, thread depth Z Pusher extended Z Pusher retracted ZG x UC x øue X øzd øbe øb øbg ZE ZJ øva depth VB AJ AH AG (A) øwc depth WD øb øbg AH A MHSHJ-DB, DB Note) or dimensions, refer to the MHSHJ- to D dimensions on page 1. MHSHJ-DB MHSHJ-DB MHSHJ-DB MHSHJ-DB MHSHJ-DB A 1 1 AG 1 AH 1 1 AJ 1 1 BE B h -. h -. h -. h -. h -. BG X UC M x. M x. M x 1 M x 1. M x 1. UD UE..... VA +. H +. H +. H +. H +. H VB WC WD ZD 1 1 ZE (mm) Z MHSHJ-DB MHSHJ-DB MHSHJ-DB MHSHJ-DB MHSHJ-DB ZG ZH M x. M x. M x 1 M x 1. M1 x 1. Z 1 1 ZJ.. 1

48 Parallel Type Air Gripper/-inger Type ong Stroke MHS Series ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø Bore size ø1 to ø Bore size Number of fingers fingers MHS MHS D MBW Bore size Auto switch 1 1 mm Action Nil mm mm D Double acting Applicable Auto Switches/Refer to pages to for further information on auto switches. Solid state auto switch Solid state auto switch ø to ø Number of fingers fingers Bore size 1 mm mm mm mm mm 1 mm mm How to Order D Type M thread Rc NPT G Without auto switch (Built-in magnet) or the applicable auto switch model, refer to the table below. MBW Action D Double acting Port thread type Symbol Cylinder bore ø to ø Nil TN ø to ø T Applicable Auto Switches/Refer to pages to for further information on auto switches. Made to Order Refer to page 1 for details. Number of auto switches Nil pcs. S 1 pc. Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) Pre-wired Applicable function entry light (Output) DC AC Perpendicular In-line. (Nil) 1 (M) () (Z) connector load -wire (NPN) V, MNV MN IC -wire (PNP) V MPV MP circuit -wire V MBV MB Diagnosis -wire (NPN) V, MNWV MNW Grommet Yes IC Relay, (-color -wire (PNP) V V MPWV MPW circuit PC indicator) -wire V MBWV MBW -wire (NPN) V, MNAV MNA IC Water resistant -wire (PNP) V MPAV MPA circuit (-color indicator) -wire V MBAV MBA Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. ead wire length symbols:. m Nil (Example) MNW Auto switches marked with a symbol 1 m M (Example) MNWM are produced upon receipt of order. m (Example) MNW m Z (Example) MNWZ Note) When using the -color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Made to Order Refer to page 1 for details. Number of auto switch Nil S n pcs. 1 pc. n pcs. Auto switch Nil Without auto switch (Built-in magnet) or the applicable auto switch model, refer to the table below. Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) Pre-wired function entry light (Output) DC AC Perpendicular In-line. (Nil) 1 (M) () (Z) connector -wire (NPN) V, MNV MN -wire (PNP) V MPV MP -wire V MBV MB Diagnosis -wire (NPN) V, MNWV MNW Grommet Yes (-color -wire (PNP) V V MPWV MPW indicator) -wire V MBWV MBW -wire (NPN) V, MNAV MNA Water resistant -wire (PNP) V MPAV MPA (-color indicator) -wire V MBAV MBA Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. ead wire length symbols:. m Nil (Example) MNW 1 m M (Example) MNWM m (Example) MNW Applicable load IC circuit IC circuit IC circuit Relay, PC Auto switches marked with a symbol are produced upon receipt of order. m Z (Example) MNWZ Note 1) When using the -color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Note ) When ordering the air gripper with auto switch, auto switch mounting brackets are supplied with the air gripper having a bore size of ø to ø. Note ) When ordering the auto switch separately, auto switch mounting brackets (BMG-) are required. 1

49 Parallel Type Air Gripper/-inger Type MHS Series s/specifications Symbol MHS-1D MHS-D MHS-D MHS-D MHS-D MHS-DMHS-D MHS-D MHS-1D MHS-D Cylinder bore size (mm) 1 1 luid Air Operating pressure (MPa). to..1 to. Ambient and fluid temperature ( C) 1 to Repeatability (mm) ±.1 Max. operating frequency (c.p.m.) ubrication Not required Action Double acting Effective gripping External grip 1 1 1, force (N) at. MPa Note 1) Internal grip Opening/Closing stroke (mm) (dia.) Weight (g) ,,, 1,, Note 1) Values for ø1 to ø are with gripping point = mm, for ø to ø with gripping point = mm, and for ø to ø with gripping point = mm. Refer to Effective Gripping orce data on pages 1 to for the gripping force at each gripping position. Double acting: Internal grip Double acting: External grip Made to Order Click here for details Symbol Specifications/Description -X Heat resistance (1 C) -X luororubber seal -X Without magnet -X EPDM seal/luorine grease -X Axial ported -X luorine grease -X Grease for food processing machines, luorine grease -XA Grease for food processing machines Refer to pages to for the specifications of products with auto switches. Auto switch installation examples and mounting positions Auto switch hysteresis Auto switch mounting Protrusion of auto switch from edge of body MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- 1 A

50 MHS Series Construction Closed condition! o t! u w! Open condition q i e!1 y r! Component Parts No. 1 Description Body Piston Cam inger Cap End plate Piston bolt Material Aluminum alloy Aluminum alloy Carbon steel Carbon steel Aluminum alloy Stainless steel Stainless steel Note Hard anodized Hard anodized Heat treated, Specially treated Heat treated, Specially treated Hard anodized No Description Magnet Type C retaining ring Piston seal Rod seal Gasket Gasket Cross recessed flat head screw Material Carbon steel NBR NBR NBR NBR Carbon steel Note Phosphate coated Zinc chromated Replacement Parts Description MHS-1D Seal kit MHS1-PS inger P1 Cam P1 Piston assembly MHS-A End plate assembly MHS-A Cap MHS-A MHS-D MHS-PS P P MHS-A1 MHS-A1 MHS-A1 MHS-D MHS-PS P P MHS-A1 MHS-A1 MHS-A1 MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1 MHS-A1 MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1 MHS-A1 Main parts!!1!! r e wui y! t Description Seal kit inger Cam Piston assembly End plate assembly Cap MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1 MHS-A1 MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1 MHS-A1 MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1 MHS-A1 MHS-1D MHS1-PS P1 P1 MHS-A MHS-A MHS-A MHS-D MHS-PS P1 P1 MHS-A1 MHS-A1 MHS-A1 Main parts!!1!! r e wui y! t Order pieces of fingers for one unit. Replacement part/grease pack part no.: MH-G1 ( g)

51 Parallel Type Air Gripper/-inger Type MHS Series Gripping Point The workpiece gripping point distance should be within the gripping force ranges given for each pressure in the effective gripping force graphs below. If operated with the workpiece gripping point beyond the indicated ranges, an excessive offset load will be applied to the sliding section of the fingers, which can have an adverse effect on the service life of the product. Gripping point Gripping point Effective Gripping orce External grip : Gripping point distance Internal grip Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as, which is the thrust of one finger when all of the fingers and attachments are in full contact with the workpiece as shown in the figure below. External Gripping orce Internal Gripping orce MHS-1D MHS-1D Pressure. MPa Pressure. MPa. MPa. MPa 1 1. MPa. MPa 1 1. MPa. MPa. MPa. MPa External grip MHS-D MHS-D 1 1 Pressure. MPa. MPa. MPa. MPa. MPa 1 1 Pressure. MPa. MPa. MPa. MPa. MPa MHZ MH MH MHR MHK MHS MHC Internal grip MHS-D MHS-D Pressure. MPa. MPa. MPa. MPa. MPa 1 1 Pressure. MPa. MPa. MPa. MPa. MPa MHT MHY MHW -X MRHQ MA D

52 MHS Series Effective Gripping orce Indication of effective gripping force The effective gripping force shown in the graphs to the right is expressed as, which is the thrust of one finger when all of the fingers and attachments are in full contact with the workpiece as shown in the figure below. External Gripping orce Internal Gripping orce MHS-D MHS-D 1 Pressure. MPa Pressure. MPa 1. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa.1 MPa.1 MPa 1 1 MHS-D MHS-D External grip 1 Pressure. MPa 1. MPa. MPa. MPa. MPa.1 MPa Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa Internal grip 1 1 MHS-D MHS-D Pressure. MPa. MPa 1. MPa 1. MPa 1 1. MPa.1 MPa Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa 1 1 MHS-D MHS-D Pressure. MPa Pressure. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa MPa.1 MPa 1 1

53 Parallel Type Air Gripper/-inger Type MHS Series External Gripping orce Internal Gripping orce MHS-D MHS-D Pressure. MPa. MPa. MPa. MPa. MPa 1.1 MPa 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa MHS-1D 1, 1, Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa MHS-D 1 1, 1, 1, Pressure. MPa 1, 1, 1, 1,. MPa 1, 1,. MPa. MPa. MPa 1,.1 MPa MHS-1D MHS-D 1 1. MPa. MPa.1 MPa Pressure. MPa. MPa. MPa 1 Pressure. MPa. MPa. MPa. MPa. MPa.1 MPa MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D-

54 MHS Series Dimensions MHS-1D to D CB P (inger opening port) x M x., thread depth TB (Thread for mounting attachment) x øsa, through SB, counterbore depth SC P.C.D.R (Mounting hole) (AA) AB P (inger closing port) øva depth VB. øwa, depth 1. x UA thread depth P.C.D.R (Mounting thread) øbc øbb Q O (Open DO) (Closed DC) J K øba Open EO Closed EC X Y Z XA, depth XB NB NA BD H +. H AD G NC Auto switch mounting groove dimensions ( locations) Mounting hole counterbore dimensions MHS-1D MHS-D / D MHS-1D.1 Counterbore depth ø ø. (.) MHS-D.1 Counterbore depth Dimensions inside ( ) are for ø. Note) The counterbore configuration differs only for the mounting hole section between the auto switch mounting grooves. (ø1, ø only) MHS-1D MHS-D MHS-D AA. AB. AD 1. BA BB BC... BD 1 1 CB DO. DC 1. 1 EO EC. 1 X Y 1 1. Z G.. H.. J 1 1 K NA 1 (mm) NB h -. h -. h -. MHS-1D MHS-D MHS-D NC O. P M x. M x. M x. Q R SA... SB.. SC TB UA M x. M x. M x. VA +. H +. H +. H VB WA +. 1H +. 1H +. H XA +. H +. H +. H XB

55 Parallel Type Air Gripper/-inger Type MHS Series MHS-D to D CB CA P (inger opening port) x øsa, through SB, counterbore depth SC P.C.D.R (Mounting hole) x TA thread depth TB Thread for mounting attachment øbc AC (AA) AB P (inger closing port) øva depth VB øwa depth WB. x UA depth UB P.C.D.R (Mounting thread) øbb Auto switch mounting groove dimensions ( locations). MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D 1 NB AA. NA BD AB H +. H +. H +. H +. H WA +. H +. H +. H +. H +. H Y AC M WB. Q O (Open DO) (Closed DC) AD... 1 BA 1 NA NB 1 h-. 1 h-. 1h-. h-. 1h-. XA XB +. H +. H +. H +. H +. H J BB NC Y. Open EO Closed EC K Auto switch mounting groove dimensions M BC O... H BD CA 1 P M x. M x. M x. M x. Rc 1/ (G 1/, NPT 1/) AD G CB.. Q 1 1 øba DO.. R Mounting hole counterbore dimensions ( positions). counterbore depth DC.. SA..... R EO.. SB.. EC SC 1. 1 X Y Z X. 1. TA M x. M x. M x. M x. M x 1 Y TB 1 1 NC MHS-D Z XA, depth XB Note) The counterbore configuration differs only for the mounting hole section between the auto switch mounting grooves. (ø only) G UA M x. M x. M x. M x 1 M x 1 H UB J 1 VA +. H +. H +. H +. H +. H (mm) K 1 VB MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D-

56 1 1 MHS Series Dimensions MHS-1D/D CB CA P (inger opening port) P (inger closing port) x øsa through SB counterbore depth SC P.C.D.R (Mounting hole) x TA thread depth TB (Thread for mounting attachment) AC (AA) AB øva depth VB. øwa depth WB øbc øbb Q O (Open DO) (Closed DC) J K Open EO Closed EC øba X Y Z XA depth XB NB NA BD M H AD G NC x UA thread depth UB P.C.D.R (Mounting thread) MHS-1D MHS-D MHS-1D MHS-D MHS-1D MHS-D MHS-1D MHS-D AA 1 1 AB 1 +. H +. 1H VB WA H 1H AC M AD NA WB BA 1 1 NB 1h -. h -. XA +. H +. 1H BB 1 BC NC 1 XB BD O. 1. CA 1 P Rc 1/ (G 1/, NPT 1/) Rc / (G /, NPT /) CB. Q 1 DO 1 R 1 DC 1 SA EO EC 1 SB 1 1. SC 1 X Y TA M x 1. M1 x 1. Z 1 TB 1 G 1 H 1 UA M x 1. M1 x UB 1 J (mm) K 1 1 VA +. H +. 1H

57 Parallel Type Air Gripper/-inger Type MHS Series MHS Series Detailed Dimensions of Mounting Portion of End Plate x A screw depth B P.C.D. C ød depth E MHZ (B) MH MH ød (E) MHR MHK MHS - MHC MHT MHY MHW MHS-1D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-1D MHS-D A M x. M x. M x. B.... C ød (mm) E X MRHQ MA D-

58 Parallel Type Air Gripper/-inger Type MHS Series ø1, ø, ø, ø, ø, ø, ø Bore size ø1 to ø Number of fingers fingers Bore size ø to ø Number of fingers fingers MHS MHS Bore size 1 1 mm mm mm Bore size mm mm mm mm D D MBW Action D Double acting Action D Double acting Auto switch Nil Without auto switch (Built-in magnet) or the applicable auto switch model, refer to the table below. Applicable Auto Switches/Refer to pages to for further information on auto switches. MBW Made to Order Refer to page for details. Number of auto switches Nil pcs. S 1 pc. Auto switch Nil Without auto switch (Built-in magnet) or the applicable auto switch model, refer to the table below. Applicable Auto Switches/Refer to pages to for further information on auto switches. Number of auto switches Nil pcs. S 1 pc. Made to Order Refer to page for details. Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) Pre-wired Applicable function entry light (Output) DC AC Perpendicular In-line. (Nil) 1 (M) () (Z) connector load -wire (NPN) -wire (PNP) -wire V, V V MNV MPV MBV MN MP MB IC circuit Diagnosis -wire (NPN) V, MNWV MNW Grommet Yes IC Relay, (-color -wire (PNP) V V MPWV MPW circuit PC indicator) -wire V MBWV MBW -wire (NPN) V, MNAV MNA Water resistant -wire (PNP) V MPAV MBAV MPA (-color indicator) IC circuit -wire V MBA Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. ead wire length symbols:. m Nil (Example) MNW Auto switches marked with a symbol are produced upon receipt of order. 1 m M (Example) MNWM m (Example) MNW m Z (Example) MNWZ Note) When using the -color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Solid state auto switch Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) Pre-wired Applicable function entry light (Output) DC AC Perpendicular In-line. (Nil) 1 (M) () (Z) connector load -wire (NPN) -wire (PNP) -wire V, V V MNV MPV MBV MN MP MB IC circuit Diagnosis -wire (NPN) V, MNWV MNW Grommet Yes IC Relay, (-color -wire (PNP) V V MPWV MPW circuit PC indicator) -wire V MBWV MBW -wire (NPN) V, MNAV MNA Water resistant -wire (PNP) V MPAV MPA (-color indicator) IC circuit -wire V MBAV MBA Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. ead wire length symbols:. m Nil (Example) MNW Auto switches marked with a symbol are produced upon receipt of order. 1 m M (Example) MNWM m (Example) MNW m Z (Example) MNWZ Note 1) When using the -color indicator type, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Note ) When ordering the air gripper with auto switch, auto switch mounting brackets are supplied with the air gripper having a bore size of ø to ø. Note ) When ordering the auto switch separately, auto switch mounting brackets (BMG-) are required. Solid state auto switch How to Order

59 Parallel Type Air Gripper/-inger Type MHS Series s/specifications Symbol Double acting: Internal grip MHS-1D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D Cylinder bore size (mm) luid 1 Air Operating pressure (MPa). to..1 to. Ambient and fluid temperature ( C) Repeatability (mm) 1 to ±.1 Max. operating frequency (c.p.m.) ubrication Action Not required Double acting Effective gripping External grip force (N) at. MPa Note 1) Internal grip Opening/Closing stroke (mm) Weight (g) , Note 1) Values for ø1 to ø are with gripping point = mm, for ø to ø with gripping point = mm. Refer to Effective Gripping orce data on pages 1 and for the gripping force at each gripping position. Double acting: External grip Made to Order Click here for details Symbol Specifications/Description -X Heat resistance (1 C) -X luororubber seal -X Without magnet -X EPDM seal/luorine grease -X Axial ported -X luorine grease -X Grease for food processing machines, luorine grease -XA Grease for food processing machines Refer to pages to for the specifications of products with auto switches. Auto switch installation examples and mounting positions Auto switch hysteresis Auto switch mounting Protrusion of auto switch from edge of body MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- A

60 MHS Series Construction Closed condition Open condition! w! u t o! i r y e!1 q! Component Parts No. Description Material Note No. Description Material Note 1 Body Piston Cam inger Cap End plate Piston bolt Aluminum alloy Aluminum alloy Carbon steel Carbon steel Aluminum alloy Stainless steel Stainless steel Hard anodized Hard anodized Heat treated, Specially treated Heat treated, Specially treated Hard anodized Magnet Type C retaining ring Piston seal Rod seal Gasket Gasket Cross recessed flat head screw Carbon steel NBR NBR NBR NBR Carbon steel Phosphate coated Zinc chromated Replacement Parts Description MHS-1D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D Main parts Seal kit MHS1-PS MHS-PS MHS-PS MHS-PS MHS-PS MHS-PS MHS-PS!!1!! inger P1 P P P1 P1 P1 P1 r Cam P1 P P P1 P1 P1 P1 e Piston assembly MHS-A MHS-A1 MHS-A1 MHS-A1 MHS-A1 MHS-A1 MHS-A1 wui End plate assembly MHS-A- MHS-A1- MHS-A1- MHS-A1- MHS-A1- MHS-A1- MHS-A1- y! Cap MHS-A MHS-A1 MHS-A1 MHS-A1 MHS-A1 MHS-A1 MHS-A1 t Order pieces of fingers for one unit. Replacement part/grease pack part no.: MH-G1 ( g)

61 Parallel Type Air Gripper/-inger Type MHS Series Gripping Point The workpiece gripping point distance should be within the gripping force ranges given for each pressure in the effective gripping force graphs below. If operated with the workpiece gripping point beyond the indicated ranges, an excessive offset load will be applied to the sliding section of the fingers, which can have an adverse effect on the service life of the product. Gripping point Gripping point External grip Internal grip : Gripping point distance Effective Gripping orce Indication of effective gripping force The gripping force shown in the tables represents the gripping force of one finger when all fingers and attachments are in contact with the workpiece. The gripping force of MHS series is the same as MHS series while one pair of opposite fingers is used to grip the workpiece and the other pair of fingers is used for positioning. External grip Internal grip External Gripping orce Internal Gripping orce MHS-1D MHS-1D MHS-D MHS-D. MPa 1 1. MPa 1 1 MHS-D MHS-D 1 Pressure. MPa. MPa 1. MPa. MPa. MPa Pressure. MPa. MPa. MPa Pressure. MPa. MPa. MPa. MPa. MPa Pressure. MPa. MPa 1. MPa. MPa. MPa Pressure. MPa. MPa. MPa. MPa. MPa Pressure. MPa. MPa. MPa. MPa. MPa MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D

62 MHS Series Effective Gripping orce Indication of effective gripping force The gripping force shown in the tables represents the gripping force of one finger when all fingers and attachments are in contact with the workpiece. The gripping force of MHS series is the same as MHS series while one pair of opposite fingers is used to grip the workpiece and the other pair of fingers is used for positioning. External grip External Gripping orce Internal Gripping orce MHS-D MHS-D 1 1 MHS-D MHS-D 1 Pressure. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa 1.1 MPa 1.1 MPa Pressure. MPa. MPa Pressure. MPa. MPa Pressure. MPa 1. MPa. MPa. MPa. MPa. MPa. MPa. MPa.1 MPa.1 MPa Internal grip MHS-D MHS-D 1 1 Pressure. MPa Pressure. MPa 1 1. MPa. MPa 1 1. MPa. MPa. MPa.1 MPa.1 MPa. MPa. MPa. MPa MHS-D MHS-D Pressure. MPa Pressure. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa. MPa MPa.1 MPa

63 Parallel Type Air Gripper/-inger Type MHS Series Dimensions MHS-1D to D x ø., through. counterbore depth SC (Mounting hole) RA AA AB øwa, depth 1. RA øva depth VB RB NB NA øb RB O (Open DO) (Closed DC) Q XA depth XB Z Y X x M x., thread depth (Mounting hole) x M x., thread depth TB Thread for mounting attachment CB P (inger opening port). ø J Open EO Closed EC K H +. G ø P (inger closing port) Auto switch mounting groove dimensions ( locations) MHS-1D MHS-D MHS-D. ø MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- MHS-1D MHS-D MHS-D AA AB B CB 1 1 DC DO EC 1 1 EO 1 1 X Y 1 1. Z G J 1 1 K NA 1 NB h -. h -. h -. O. P M x. M x. M x. (mm) Q MHS-1D MHS-D MHS-D RA 1 RB 1 1 SC. 1 TB VA +. H +. H +. H VB WA +. 1H +. 1H +. H XA +. H +. H +. H XB

64 MHS Series Dimensions MHS-D/D x øsa through SB counterbore depth (Mounting hole) AA RA RA AB. øva depth VB RB NA øb RB. (Open DO) (Closed DC) Q h -. CB CA XA depth XB Z Y X x UA, thread depth UB (Mounting hole) øwa depth x M x., thread depth Thread for mounting attachment M x. (inger opening port) J Open EO Closed EC G M x. (inger closing port) MHS-D MHS-D AA AB 1 B CA CB 1 1 DC DO EC EO X. Y.. Z G. J 1 H H NA 1 1 Q RA RB (mm) SA.. MHS-D MHS-D SB. UA M x. M x 1 UB 1 VA +. H +. H VB WA +. H +. H XA +. H +. H XB

65 YC Parallel Type Air Gripper/-inger Type MHS Series MHS-D / D x ø.1 through. counterbore depth SC (Mounting hole) RA AC AA AB. RA øva depth VB RB NA øb RB O (Open DO) (Closed DC) Q NB XA depth XB Z Y X x M x 1, thread depth (Mounting hole) øwa depth WB x M x., thread depth 1 Thread for mounting attachment CB CA M x. (inger opening port) MHZ Open EO Closed EC MH MH J K MHR MHS-D MHS-D MHS-D MHS-D AA O. AB Q 1 1 AC RA B RB CA SC 1 CB DC 1 VA +. H +. H M DO 1 VB G EC WA +. H +. H EO 1 X 1 WB. M x. (inger closing port) Y. XA +. H +. H Z G. XB YC. J K 1 H H M NA 1 (mm) NB 1h -. h -. MHK MHS MHC MHT MHY MHW MHS Series Detailed Dimensions of Mounting Portion of End Plate ød depth E ød depth E (E) (B) -X MRHQ MA C C ød D- C ø1 to ø x A screw depth B C ø to ø x A screw depth B MHS-1D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D A M x. M x. - B... C ød E... 1

66 MHS Series Auto Switch Installation Examples and Mounting Positions Various auto switch applications are possible through different combinations of auto switch quantities and detecting positions. 1) Detection when Gripping Exterior of Workpiece Detection example 1. Confirmation of fingers in reset position. Confirmation of workpiece held. Confirmation of workpiece released Position to be detected Position of fingers fully opened Position when gripping a workpiece Position of fingers fully closed Operation of auto switch Auto switch turned ON when fingers return. (ight ON) Auto switch turned ON when gripping a workpiece. (ight ON) When a workpiece is not held (Abnormal operation): Auto switch to turn ON (ight ON) Detection combinations One auto switch One position, any of q, w and e can be detected. Two auto switches Two positions of q, w and e can be detected. Pattern A B C How to determine auto switch installation position Step 1) ully open the fingers. Step 1) Position fingers for gripping a workpiece. Step 1) ully close the fingers. At no pressure or low pressure, connect the auto switch to a power supply, and follow the directions. Step ) Insert the auto switch into the auto switch installation groove in the direction shown in the following drawing. Step ) Slide the auto switch in the direction of the arrow until the indicator light illuminates. Also, in case of lead wire entry from the finger direction, installation should be from the direction shown in the drawing. Step ) Slide the auto switch in the direction of the arrow until the indicator light illuminates. Move the switch further. to. mm in the direction of the arrow and fasten it. Step ) Slide the auto switch in the direction of the arrow until the indicator light goes out. Position where light turns ON. to. mm Step ) Move the auto switch in the opposite direction until the indicator light illuminates. Move the switch further. to. mm beyond the position where the indicator light illuminates and fasten it. Position to be secured Position where light turns ON. to. mm Position to be secured Note 1) It is recommended that gripping of a workpiece be performed close to the center of the finger stroke. Note ) When holding a workpiece close at the end of open/close stroke of fingers, detecting performance of the combinations listed in the above table may be limited, depending on the hysteresis of an auto switch, etc.

67 Prallel Type Air Gripper MHS Series Various auto switch applications are possible through different combinations of auto switch quantities and detecting positions. ) Detection when Gripping Interior of Workpiece Detection example 1. Confirmation of fingers in reset position. Confirmation of workpiece held. Confirmation of workpiece released Position to be detected Position of fingers fully closed Position when gripping a workpiece Position of fingers fully opened Operation of auto switch Auto switch turned ON when fingers return. (ight ON) Auto switch turned ON when gripping a workpiece. (ight ON) When a workpiece is not held (Abnormal operation): Auto switch to turn ON (ight ON) Detection combinations One auto switch One position, any of q, w and e can be detected. Two auto A switches Two positions of B q, w and e can be detected. C Pattern How to determine auto switch installation position Step 1) ully close the fingers. Step 1) Position fingers for gripping a workpiece. Step 1) ully open the fingers. At no pressure or low pressure, connect the auto switch to a power supply, and follow the directions. Step ) Insert the auto switch into the auto switch installation groove in the direction shown in the following drawing. Step ) Slide the auto switch in the direction of the arrow until the indicator light illuminates. Move the switch further. to. mm in the direction of the arrow and fasten it. Position where light turns ON Position to be secured. to. mm Step ) Slide the auto switch in the direction of the arrow until the indicator light illuminates. Step ) Slide the auto switch further in the direction of the arrow until the indicator light goes out. Step ) Move an auto switch in the opposite direction and fasten it at a position. to. mm beyond the position where the indicator light illuminates. Position where light turns ON Position to be secured. to. mm Also, in case of lead wire entry from the finger direction, installation should be from the direction shown in the drawing. MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- Note 1) It is recommended that gripping of a workpiece be performed close to the center of the finger stroke. Note ) When holding a workpiece close at the end of open/close stroke of fingers, detecting performance of the combinations listed in the above table may be limited, depending on the hysteresis of an auto switch, etc.

68 MHS Series Auto Switch Hysteresis Auto switches have hysteresis similar to micro switches. Use the table below as a guide when adjusting auto switch positions, etc. Hysteresis Auto switch reset position (O) Switch operating position (ON) MHS/MHS Series Air gripper model Auto switch model MHS - 1D MHS MHS - D MHS MHS - D MHS MHS - D MHS MHS - D MHS MHS - D MHS MHS - D MHS MHS - D MHS MHS -1D MHS MHS -D MHS Hysteresis (Max. value) D-M(V) D-MW(V) D-MA(V) (mm) MHSJ/MHSH Series Air gripper model Auto switch model MHSJ -1D MHSH MHSJ -D MHSH MHSJ -D MHSH MHSJ -D MHSH MHSJ -D MHSH MHSJ -D MHSH MHSJ -D MHSH MHSJ -D MHSH Hysteresis (Max. value) D-M(V) D-MW(V) D-MA(V) (mm) (mm) Air gripper model Auto switch model MHS - D MHS MHS - D MHS MHS - D MHS MHS - D MHS MHS - D MHS MHS -1D MHS MHS -D MHS Hysteresis (Max. value) D-Y/Y/YP(V) D-YW(V)/YBA Note) The actual mounting position should be adjusted after confirming the auto switch performance.

69 Prallel Type Air Gripper MHS Series Auto Switch Hysteresis Center pusher/cylinder type Hysteresis Switch operating position (ON) Air gripper model Auto switch model MHSH-DA MHSH-DA MHSH-DA MHSH-DA MHSH-DA Hysteresis (Max. value) D-M(V) D-MW(V) D-MA(V)..... (mm) Note) The actual mounting position should be adjusted after confirming the auto switch performance. Switch reset position (O) MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D-

70 MHS Series Protrusion of Auto Switch from Edge of Body The projection of an auto switch from the edge of the body is shown in the table below. Use the table as a guideline for mounting. The MHSJ and MHSH series are described on another page. Mounting with lead wire on side opposite the fingers In-line electrical entry type Mounting with lead wire on same side as the fingers (mm) Direction of auto switch mounting on air gripper Perpendicular electrial entry type In-line electrical entry type Perpendicular electrial entry type Air gripper model MHS-1D MHS-D MHS-D MHS-1D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-1D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-1D MHS-D ead wire type Auto switch model inger position Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed In-line entry D-M D-MA D-MW Perpendicular entry D-MV D-MAV D-MWV In-line entry D-M D-MA D-MW 1 1 Perpendicular entry D-MV D-MAV D-MWV Note 1) There is no protrusion for sections of the table with no values entered. Note ) When mounted with lead wires on the finger side, be sure that attachments and workpieces, etc., do not touch switch units or lead wires. Note ) The actual mounting position should be adjusted after confirming the auto switch performance. 1

71 Prallel Type Air Gripper MHS Series Protrusion of Auto Switch from Edge of Body The projection of an auto switch from the edge of the body is shown in the table below. Use the table as a guideline for mounting. (mm) Direction of auto switch mounting on air gripper Mounting with lead wire on side opposite the fingers In-line electrical entry type Perpendicular electrial entry type Mounting with lead wire on same side as the fingers In-line electrical entry type Perpendicular electrial entry type Air gripper model MHS-D MHS-D MHS-D MHS-D MHS-D MHS-1D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-D MHS-1D MHS-D ead wire type Auto switch model inger position Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed D-Y D-YP D-YW.. In-line entry D-YBA.. Perpendicular entry D-Y D-YPV D-YWV 1 1 In-line entry D-Y D-YP D-YBA D-YW. Perpendicular entry D-Y D-YPV D-YWV Note 1) There is no protrusion for sections of the table with no values entered. Note ) When mounted with lead wires on the finger side, be sure that attachments and workpieces, etc., do not touch switch units or lead wires. Note ) The actual mounting position should be adjusted after confirming the auto switch performance. MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- 1

72 MHS Series Protrusion of Auto Switch from Edge of Body The projection of an auto switch from the edge of the body is shown in the table below. Use the table as a guideline for mounting. In-line electrical entry type Perpendicular electrial entry type Air gripper model MHSJ -1D MHSH MHSJ -D MHSH MHSJ -D MHSH MHSJ -D MHSH MHSJ -D MHSH MHSJ -D MHSH MHSJ -D MHSH MHSJ -D MHSH ead wire type Auto switch model inger position Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed Open Closed In-line entry D-M D-MA D-MW (mm) Perpendicular entry D-MV D-MAV D-MWV Note 1) Indicates the amount of protrusion from the mounting surface. There is no protrusion from the finger side. Note ) There is no protrusion for sections of the table with no values entered. Note ) When mounted with lead wires on the finger side, be sure that attachments and workpieces, etc., do not touch switch units or lead wires. Note ) The actual mounting position should be adjusted after confirming the auto switch performance. Protrusion from Edge of Push Holder (P) The amount of auto switch protrusion from the push holder (P) end surface is shown in the table below. Use this as a standard when mounting, etc. Center Pusher/Cylinder Type In-line electrical entry type Perpendicular electrial entry type ead wire type In-line entry D-M Air gripper D-MW model D-MA MHSH-DA Extended Retracted MHSH-DA Extended Retracted MHSH-DA Extended Retracted.. MHSH-DA Extended Retracted MHSH-DA Extended Retracted Auto switch model inger position (mm) Perpendicular entry D-MV D-MAV D-MWV 1.. Note) The actual mounting position should be adjusted after confirming the auto switch performance.

73 Prallel Type Air Gripper MHS Series Auto Switch Mounting Applicable models: MHS-1,, MHS-1,, MHSJ-1,,,,,,, MHSH-1,,,,,,, MHSH-A,,,, MHS-1,, MHS-1,, To set the auto switch, insert the auto switch into the installation groove of the gripper from the direction indicated in the following drawing. After setting the position, tighten the attached auto switch mounting set screw with a flat head watchmaker s screwdriver. Applicable models: MHS-,,, MHS-,,,,, 1, MHS-,,,,, 1, MHS-,,, (1) To set the auto switch, insert the auto switch into the installation groove of the cylinder as shown below and set it roughly. () Insert the auto switch into the auto switch bracket installation groove. () After confirming the detecting position, tighten the set screws (M.) attached to the auto switch and set it. () Be sure to change the detecting position in the state of (). ø to ø ø to ø lat head watchmaker s screwdriver Auto switch mounting screw M. x lat head watchmaker s screwdriver Auto switch mounting screw M. x Auto switch mounting brackets Auto switch MHZ Auto switch Note) Use a watchmaker s screwdriver with a grip diameter of to mm to tighten the auto switch mounting screw. The tightening torque should be about. to.1 N m. Auto Switch Mounting Bracket Part No. Auto switch model Auto switch mounting bracket part no. D-M(V) D-MW(V) BMG- D-MA(V) Note) Use a watchmaker s screwdriver with a grip diameter of to mm to tighten the set screw (M.). The tightening torque should be. to 1 N m. It should be turned about beyond the point at which tightening can be felt. MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D-

74 MHS Series Made to Order: Individual Specifications Symbol 1 Single Acting (Normally open, Normally closed) -X Piping from two directions are possible Piping and auto switch wiring entries are one way. (or top ported) Top port Auto switch wiring Air piping Side port How to Order MHS Number of fingers fingers Bore size 1 1 mm mm mm mm mm mm mm S MBW X Single acting Number of auto switches Nil pcs. ø1 to ø S 1 pc. n n pcs. ø to ø Auto switch Nil Without auto switch (Built-in magnet) * or the applicable auto switch model, refer to the table below. Action S Single acting (Normally open) C Single acting (Normally closed) Applicable Auto Switches/Refer to pages to for further information on auto switches. Type Special Electrical Indicator Wiring oad voltage Auto switch model ead wire length (m) * Pre-wired Applicable function entry light (Output) DC AC Perpendicular In-line. (Nil) 1 (M) () (Z) connector load -wire (NPN) V, MNV MN V V V v v IC circuit Solid state auto switch Diagnostic indication (-color indicator) Water resistant (-color indicator) Grommet Yes -wire (PNP) V MPV MP V V V v v -wire V MBV MB V V V v v -wire (NPN) V, MNWV MNW V V V v v IC -wire (PNP) V V MPWV MPW V V V v v circuit -wire V MBWV MBW V V V v v -wire (NPN) V, MNAV ** MNA ** v v V v v IC -wire (PNP) V MPAV ** MPA ** v v V v v circuit -wire V MBAV** MBA ** v v V v v ** Water resistant type auto switches can be mounted on the above models, but in such case SMC cannot guarantee water resistance. * ead wire length symbols:. m Nil (Example) MN * Solid state auto switches marked with p are produced upon receipt of order. 1 m M (Example) MNWM m (Example) MN m Z (Example) MNZ Note 1) When using the -color indicator, please make the setting so that the indicator is lit in red to ensure the detection at the proper position of the air gripper. Note ) When ordering the air gripper with auto switch in MHS-S to S series, auto switch mounting brackets are required (shipped together). In addition, when ordering the auto switch separately, auto switch mounting brackets (BMG-) are required. Relay, PC

Parallel Style Air Gripper/2 Finger, 3 Finger, 4 Finger

Parallel Style Air Gripper/2 Finger, 3 Finger, 4 Finger arallel Style Air Gripper/ inger, inger, inger Series MHS ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø MHZ MH MH MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- ightweight, compact design with reduced height High repeatability:

More information

Parallel Style Air Gripper/2 Finger, 3 Finger, 4 Finger

Parallel Style Air Gripper/2 Finger, 3 Finger, 4 Finger arallel Style Air Gripper/ inger, inger, inger Series ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø MHZ MH MH Courtesy of Steven Engineering, Inc.- Ryan Way, South San rancisco, CA --Main Office: () --Outside ocal Area:

More information

2 Finger, 3 Finger, 4 Finger Parallel Style Air Gripper. Series MHS. MHZ MHF MHL MHR MHK MHS MHC MHT MHY MHW MRHQ Misc.

2 Finger, 3 Finger, 4 Finger Parallel Style Air Gripper. Series MHS. MHZ MHF MHL MHR MHK MHS MHC MHT MHY MHW MRHQ Misc. 1 inger, inger, inger arallel Style Air Gripper Series MH MH - --1 ightweight, compact design with reduced height ong stroke () introduced to upgraded series. Ideal for gripping workpieces of different

More information

Series MHSH3. ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80 Through Hole. How to Order. Dust cover type (with dust cover only)

Series MHSH3. ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80 Through Hole. How to Order. Dust cover type (with dust cover only) inger Air Gripper arallel Type Series MHSH ø1, ø, ø, ø, ø, ø, ø, ø Through Hole MHSH How to Order D N Dust cover Nil Without dust cover J With dust cover Note) ø1, ø and ø are not available with dust cover.

More information

Wedge Cam Operation Slide Guide. Air Gripper/2-Finger Type ø12, ø16, ø20, ø25. Option: Stainless steel

Wedge Cam Operation Slide Guide. Air Gripper/2-Finger Type ø12, ø16, ø20, ø25. Option: Stainless steel Wedge Cam Operation Slide Guide Air Gripper/2-inger Type ø2, ø, ø, ø2 MH MH oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials Standard: Carbon

More information

Series MHS. 2 Finger, 3 Finger, 4 Finger Air Gripper Parallel Type. ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100, ø125

Series MHS. 2 Finger, 3 Finger, 4 Finger Air Gripper Parallel Type. ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100, ø125 NS-1 inger, inger, inger Air ripper Parallel Type Series MHS ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø1 ong inger Stroke Type Protective Boots Available Available With Center Pusher ightweight, compact design with

More information

Series MHK2. Wedge Cam Operation Slide Guide Air Gripper (2 Finger)

Series MHK2. Wedge Cam Operation Slide Guide Air Gripper (2 Finger) Wedge Cam Operation lide Guide Air Gripper (2 inger) ø2, ø, ø2, ø2 oad Resistant, Dust Cover for Adverse Environments 2 types of finger materials types of dust cover materials tandard: Carbon steel Optional:

More information

Parallel Style Air Gripper: Wide Type

Parallel Style Air Gripper: Wide Type Parallel Style Air Gripper: Wide Type Series MHL Built-in dust-protection mechanism A scraper with a dust lip is adopted for all rod rotating parts. A large amount of gripping force is provided through

More information

How to Order M9BW. Action. Double acting Single acting. Load voltage Electrical entry direction M9NWV M9NW 12 V 5 V, M9BWV M9BW 12 V 12 V

How to Order M9BW. Action. Double acting Single acting. Load voltage Electrical entry direction M9NWV M9NW 12 V 5 V, M9BWV M9BW 12 V 12 V Angular Type Air Gripper/Standard Type 2 Series ø, ø1, ø20, ø25 How to Order Angular type air gripper 2 20 Bore size mm 1 1 mm 20 20 mm 25 25 mm D S Action D Double acting Single acting M9BW Made to Order

More information

180 Angular Style Air Gripper

180 Angular Style Air Gripper 8 Angular Style Air Gripper Series 2/2 Cam Style / Rack & Pinion Style 99 8 Angular Style Air Gripper Cam Style Rack & Pinion Style Series 2/2 Series 2/Cam Style Light and compact size in small bore sizes

More information

Rotary Actuated Air Gripper

Rotary Actuated Air Gripper Rotary ctuated ir Gripper MHR, MDHR/MHR3, MDHR3 -finger type: Size, 15,, 3/ 3-finger type: Size, 15 High Precision - Repeatability ±.1 mm Parallel opening and closing mechanism utilizing a cross roller

More information

Low Profile Air Gripper

Low Profile Air Gripper Low Profile Air Gripper Series MHF2 MHZ MHF MHL MHR MHK MHS MHC MHT MHY MHW -X Low profile air gripper with space-saving design MRHQ MA D- Courtesy of Steven ngineering, Inc.-2 Ryan Way, South San Francisco,

More information

Low Profile Air Gripper

Low Profile Air Gripper Low Profile Air Gripper MHF2 Series ø8, ø, ø, ø RoHS Low profile air gripper with space-saving design MHZ MHF MHL MHR MHK MHS MHC MHT MHY MHW -X MRHQ MA D- 465 Low Profile Air Gripper MHF2 Series Height

More information

Parallel Type Air Gripper

Parallel Type Air Gripper Parallel Type Air Gripper MHZ eries ø, ø1, ø1, ø2, ø2, ø32, ø MHZ MHF MHL MHR MHK MH MHC MHT MHY MHW -X MRHQ MA D- 381 Integral linear guide used for high rigidity Repeatability: ±.1 mm Low profile Martensitic

More information

Specifications MHC2-10D MHC2-16D MHC2-20D MHC2-25D MHC2-10S. Double acting MHC2-16S. Single acting MHC2-20S MHC2-25S. Angular style air gripper

Specifications MHC2-10D MHC2-16D MHC2-20D MHC2-25D MHC2-10S. Double acting MHC2-16S. Single acting MHC2-20S MHC2-25S. Angular style air gripper Angular Style Air Gripper Standard Type Series MHC2 Size: 10, 16, 20, 25 A large amount of gripping force is provided through the use of a double piston mechanism, while maintaining a compact design. Built-in

More information

Angular Style Air Gripper

Angular Style Air Gripper Angular Style Air Gripper Series /A/M 15 Angular style air gripper Series /A/M - Auto switch is attachable. 8 mm x 0 mm x mm g Body option (Only for A-) Side piping Port Port A- Short body. 1 mm x 0 mm

More information

MHR3/MDHR3 Series. Rotary Actuated Air Gripper/3-Finger Type. Size: 10, 15 MDHR 3 10 R M9N S. How to Order. Without auto switch

MHR3/MDHR3 Series. Rotary Actuated Air Gripper/3-Finger Type. Size: 10, 15 MDHR 3 10 R M9N S. How to Order. Without auto switch Rotary ctuated ir Gripper/3-Finger Type MHR3/MDHR3 Series Size:, 1 How to Order Without auto switch MHR 3 R Connecting port R ody side R: ody side Port With auto switch (uilt-in magnet) MDHR 3 R M9N S

More information

240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g.

240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g. Compact Slide Series ø, ø, ø, ø RoHS Allowable moment MXS Improved by up to MXQ MXQ 2% MXF MXW MXJ MXP MXY With new high rigidity linear guide MTS Allowable moment improvement illustrated below Allowable

More information

Parallel Style Air Gripper

Parallel Style Air Gripper Parallel tyle Air Gripper eries MHZ MHZ MH -X D- Courtesy of teven Engineering, Inc.-3 Ryan Way, outh an Francisco, CA 98-37-Main Office: () 88-9-Outside Local Area: (8) 8-9-www.stevenengineering.com 373

More information

Series MHSL3. How to Order F9N. Auto switch type. Nil Without auto switch (bulit-in magnet) Auto switch specifications. Type. Solid state.

Series MHSL3. How to Order F9N. Auto switch type. Nil Without auto switch (bulit-in magnet) Auto switch specifications. Type. Solid state. inger Air ripper arallel Type Cylinder Bore Size ø1 to ø Series MS ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø1 MS ow to Order D N finger MS finger MS Cylinder Bore Size ø to ø1 Symbol Number of fingers fingers Number

More information

How to Order. Lead wire length Nil L Z M9N L. Type of auto switch for detecting rotation. Nil Without auto switch. Applicable Auto Switch

How to Order. Lead wire length Nil L Z M9N L. Type of auto switch for detecting rotation. Nil Without auto switch. Applicable Auto Switch Indicator light Indicator light Rotary Gripper Series MRHQ Size:, 1,, 25 How to Order Lead wire length Nil L Z.5 m 3 m 5 m MRH Q D 9 S M9NV L M9N L Q Rotary gripper Gripper Parallel type: 2 fingers D S

More information

Compact Slide. Series MXH ø6, ø10, ø16, ø20

Compact Slide. Series MXH ø6, ø10, ø16, ø20 Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations

More information

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8 Precision Cylinder Series, ø, ø6, ø, ø, ø, ø MXS Series Variations Model 8 Standard stroke (mm) 7 7 Rod end configuration Cushion Rubber bumper End lock Made to Order Rod Variable stroke/ through-hole

More information

Parallel Style Air Gripper Series MHZ

Parallel Style Air Gripper Series MHZ Parallel tyle ir Gripper eries MHZ 17 Integral linear guide used for high rigidity Repeatability: ±.1 mm Low profile Martensitic stainless steel High degree of mounting flexibility Can be mounted five

More information

Low Profile Air Gripper. Series MHF2. Low profile air gripper with space-saving design is newly released. 5-77

Low Profile Air Gripper. Series MHF2. Low profile air gripper with space-saving design is newly released. 5-77 Low Profile Air Gripper Low profile air gripper with space-saving design is newly released. 5-77 Low Profile Air Gripper Height is approximately / the size of an equivalent Series MHZ2. MHZ2-D 42 Bore

More information

Air Gripper (2 Finger) (3 Finger)

Air Gripper (2 Finger) (3 Finger) Rotary Actuated Air Gripper ( Finger) (3 Finger) MHR/MDHR, MHR3/MDHR3 High Precision - Repeatability ±0.01mm Parallel opening and closing mechanism utilizing a cross roller guide produces smooth operation

More information

Parallel Style Air Gripper

Parallel Style Air Gripper INFRMATIN Parallel tyle Air Gripper With Dust Cover Model variations with excellent dust proof and drip proof dust cover are expanded. MHZL2 Long stroke type MHZL2 series ø1, ø16 and ø2 with dust cover

More information

Guide Table. MGF Series

Guide Table. MGF Series Guide Table MGF Series ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

Guide Table. ø40, ø63, ø100

Guide Table. ø40, ø63, ø100 Guide Table Series MGF ø, ø, ø Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43 CAT.EUS- B -UK Free Mount Cylinder A space-saving air cylinder with multiple surfaces capable of direct mounting. Offered in many variations. Space-saving The multiple surface direct mounted rectangular

More information

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations.

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Free Mount Cylinder Series CU A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations. Space-saving The multiple surface direct mounting with a square

More information

180 Angular Style Air Gripper

180 Angular Style Air Gripper 18 Angular tyle Air Gripper eries 2/2 Cam tyle / Rack & Pinion tyle -X D- Courtesy of teven Engineering, Inc.-2 Ryan Way, outh an Francisco, CA 98-67-Main ffice: (6) 88-92-utside Local Area: (8) 28-92-www.stevenengineering.com

More information

Guide Table. Series MGF

Guide Table. Series MGF Guide Table Series MGF ø, ø, ø0 Low-profile compact cylinder utilizes a large concentric guiding sleeve to provide excellent eccentric load resistance. Mounting height greatly reduced Low-profile cylinder

More information

Compact Guide Cylinder Series MGQ

Compact Guide Cylinder Series MGQ Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø0 ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

Compact Cylinder/Plate type

Compact Cylinder/Plate type Compact Cylinder/Plate type Series :,,, Width: Reduced by up to % (compared with SMC series) Total length: Reduced by up to % Volume: Reduced by up to 1% Weight: Reduced by up to % (compared with SMC series

More information

Mini Rotary Actuator/Rack & Pinion Style

Mini Rotary Actuator/Rack & Pinion Style Mini Rotary Actuator/Rack & Pinion Style Series CRJ :, CRB2 CRBU2 CRB MSU CRJ CRA CRQ2 MSQ MSZ CRQ2X MSQX MRQ PAT. PEND D- 79 Mini Rotary Actuator Series CRJ Rack & Pinion Style/:, Compact 9.5 23.5 43(54)

More information

Mini Rotary Actuator/Rack & Pinion Style

Mini Rotary Actuator/Rack & Pinion Style Mini Rotary Actuator/Rack & Pinion Style Series CRJ :, CRB2 CRBU2 CRB MSU CRJ CRA CRA CRQ2 MSQ MSZ CRQ2X MSQX MRQ PAT. PEND D- 79 Mini Rotary Actuator Series CRJ Rack & Pinion Style/:, Compact 9.5 23.5

More information

FKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot

FKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot Catalog No. KHS- KHS Series Jaw Parallel Motion Pneumatic Grippers Mounting Hole Can be mounted from the gripper side Mounting slot for easy sensor installation Sensor Capable Bottom tapped holes Can be

More information

New cylinder body allows small auto switches to be mounted on 4 surfaces.

New cylinder body allows small auto switches to be mounted on 4 surfaces. Toggle Type Air Gripper ø32, ø4, ø5, ø63 New cylinder body allows small auto switches to be mounted on 4 surfaces. RoH Auto switch mounting rail removed. A round slot for mounting small auto switches is

More information

Toggle Type Air Gripper

Toggle Type Air Gripper ø2, ø40, ø50, ø6 Ideal for gripping heavy workpiece Toggle mechanism is adopted. Holds workpiece even when pressure drops. The toggle mechanism that activates when the finger closes realizes strong and

More information

Heavy Duty Stopper Cylinder

Heavy Duty Stopper Cylinder Heavy Duty Stopper Cylinder Series ø, ø32 To stop pallets gently Stopper cylinder with built-in shock absorber Amount of energy absorption can be adjusted to suit the load. Stops the workpiece gently with

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø, ø, ø, ø, ø, ø, ø, ø, ø, ø ir cylinder with guide integrated that has achieved anti-lateral load and high non-rotating accuracy. Space-saving cylinder. Suitable as stoppers

More information

22mm Space required between the bottom of the cylinder body and your equipment is reduced.

22mm Space required between the bottom of the cylinder body and your equipment is reduced. Compact Guide Cylinder ø2,,, ø2,,, ø0, ø63,, ø0 With air cushion Water resistant cylinder are now available. New Up to 7% Weight reduced! New Weight reduced by up to 7% with a shorter guide rod and thinner

More information

Free Mount Cylinder for Vacuum

Free Mount Cylinder for Vacuum Free Mount Cylinder for Vacuum Series A free mount cylinder with a vacuum passage in the rod to meet the requirements for Air cylinder + Vacuum pad. A vacuum passage has been provided in the rod of the

More information

Parallel Type Air Gripper. Series MHZ. ø6, ø10, ø16, ø20, ø25, ø32, ø40 MHZ MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ.

Parallel Type Air Gripper. Series MHZ. ø6, ø10, ø16, ø20, ø25, ø32, ø40 MHZ MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ. Parallel Type Air Gripper Series ø, ø1, ø1, ø, ø, ø3, ø MHQ MHL MHR MHK MHS Series upgraded with the addition of new models and expanded size variations Long stroke/l and compact series/a- introduced ø,

More information

Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder.

Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder. Compact Guide Cylinder: Series S ø, Compact Guide Cylinder Compact guide cylinder Heavy duty guide rod type S Z73 mm mm How to Order Number of auto switches Nil S 2 pcs. 1 pc. Auto switch type Nil Without

More information

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New: CAT.ES-3 E -UK Dual-Rod Cylinder Series CXS New: CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ Dual-Rod Cylinder with guide functio for pick-and-place applications Series CXS! Twice the

More information

22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder.

22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder. Compact Guide Cylinder Series ø2,,, ø2,,, ø, ø63,, ø0 Up to Weight reduced by up to 24% with a shorter guide rod and thinner plate 24% Weight reduced! 3 types of bearing can be selected. Slide bearing

More information

Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines.

Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. AHC System Series MA Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. The robot hand tools change automatically to accommodate workpieces of different

More information

Series MHY2/MHW Angular Gripper. Series MHY/Cam Style. Light and compact size in small bore sizes. Auto switch mounting at 4 locations

Series MHY2/MHW Angular Gripper. Series MHY/Cam Style. Light and compact size in small bore sizes. Auto switch mounting at 4 locations 18 Angular Gripper Cam tyle Rack & Pinion tyle eries /MHW2 eries MHY/Cam tyle Light and compact size in small bore sizes Model Bore size mm Effective holding moment Nm verall length Lmm L Weight g -1D

More information

Low-Speed Rotary Actuator

Low-Speed Rotary Actuator Low-Speed Rotary Actuator Series CRQX/ Possible to transfer a workpiece at low-speed. Rotation time adjustment range: to ( s/9 ) Lowspeed Standard Model CRQX CRQ,,,,,,,,,,,,,, Rotation time adjustment

More information

Rack & Pinion Type/Size: 30, 50, 63, 80, 100. Compact auto switches are mountable. (D-M9 ) Rotating angle. Rotating. angle

Rack & Pinion Type/Size: 30, 50, 63, 80, 100. Compact auto switches are mountable. (D-M9 ) Rotating angle. Rotating. angle Rotary Actuator Series Rack & Pinion Type/: 3, 5, 63, 8, 1 Compact auto switches are mountable. (D-M9 ) Width reduced by up to 14 mm Space saving by changing the auto switch rail mounting to groove mounting.

More information

Compact Guide Cylinder

Compact Guide Cylinder Compact Guide Cylinder Series ø2, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Series standard type and series high precision ball bushing bearing type (except with end lock) products have been remodeled for a lightweight

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary Actuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CRB2 CRBU2 CRB1 MSU CRJ CRA1 Rotation 360 type 360 MSZ MRQ Series Variations Page Rotating angle 80 to 0 170

More information

1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.

1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover. Air Cylinder 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS 10 (ø50-100 stroke) % lighter Current model 1.9 kg 1 Series 1.7 kg J 1 Reduced weight by changing the shape of the rod cover and head cover.

More information

Compact Guide Cylinder Series MGP

Compact Guide Cylinder Series MGP Compact Guide Cylinder Series MGP ø2, ø, ø, ø, ø, ø, ø, ø,, ø0 MGJ MGP MGQ MGG MGC MGF MGZ MGT Series Variations Series Bearing type Cushion 2 0 Page Standard type MGP With air cushion MGP With end lock

More information

Low-Speed Rotary Actuator

Low-Speed Rotary Actuator Low-Speed Rotary Actuator Series CRQX/ Possible to transfer a workpiece at low-speed. Rotation time adjustment range: to ( s/9 ) Lowspeed Standard Model CRQX CRQ,,,,,,,,,,,,,, Rotation time adjustment

More information

Slide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32

Slide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32 Slide Unit CX/M/L Series Slide Bearing/CX:ø0, ø, ø5 M:ø0, ø, ø0, ø5, ø3 Ball Bushing Bearing/L:ø0, ø, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy

More information

Mechanically Jointed Rodless Cylinder

Mechanically Jointed Rodless Cylinder Mechanically Jointed Rodless Cylinder MY Series ø, ø, ø MYB MY MYB MYM MYC MY MY T MY W MYC MY /T MYA MYB MYM Compact and low profile design D- -X Technical Data Mechanically Mechanically Jointed Jointed

More information

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions

Miniature Guide Rod Cylinder ±0.1. Mounting from 2 directions Miniature Guide Rod Cylinder Series Non-rotating accuracy : Height ±0.1 Mounting from 2 directions idth Overall length Two auto switches can be mounted even for mm strokes Integral wiring/piping to one

More information

Rotary Actuator. New RoHS. New. Vane Type 10, 15, 20, 30, 40. Many combinations available! Series CRB 2. Standard type/series CRB2

Rotary Actuator. New RoHS. New. Vane Type 10, 15, 20, 30, 40. Many combinations available! Series CRB 2. Standard type/series CRB2 Rotary Actuator Vane Type 1, 15, 2, 3, 4 Standard Type Free Mount Type Many combinations available! Standard type/series Piping ports are located on the flat surface. Fittings can be secured firmly, piping

More information

Rotary Actuator. New RoHS. Compact auto switches are mountable. Weight is reduced by up to 14 %. Mounting interchangeable with the current model

Rotary Actuator. New RoHS. Compact auto switches are mountable. Weight is reduced by up to 14 %. Mounting interchangeable with the current model Rotary Actuator Ø 30, Ø 50, Ø 63, Ø 80, Ø 100 New RoHS Compact auto switches are mountable. (D-M9 ) Width reduced by up to 14 mm Space saving by changing the auto switch rail mounting to groove mounting.

More information

Mini Free Mount Cylinder

Mini Free Mount Cylinder Mini Free Mount Cylinder Series ø, ø, ø, ø, ø, ø1, ø Series 1 ction Stroke 1 2 0 0 0 Clean uto switch series None Rod end Male threaded Without thread Solid state switch D-F D-M9 D-M9 W Female threaded

More information

Plate Cylinder. MU Series. It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting. ø25, ø32, ø40, ø50, ø63

Plate Cylinder. MU Series. It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting. ø25, ø32, ø40, ø50, ø63 Plate Cylinder MU Series ø, ø, ø, ø, ø It is possible to mount small auto switches in 4 directions. No stick-out Easy mounting RoHS Small auto switch CUJ CU CQS JCQ CQ2 Reduction of labor for work RQ CQM

More information

Dual Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. Dual rod cylinder with guide function suitable for pick & place applications.

Dual Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. Dual rod cylinder with guide function suitable for pick & place applications. Dual Rod Cylinder Series J/ ø, ø0, ø, ø, ø, Dual rod cylinder with guide function suitable for pick & place applications. Twice the thrust Non-rotating accuracy ±0. Ball bushing bearings and slide bearings

More information

Basic type/direct mount type

Basic type/direct mount type Basic type/direct mount type Series / ø, ø, ø, ø, ø, ø, ø, ø, ø3 CYS -Z CYL CYH CYF CYP 443 D- -X Technical data Magnetically Coupled Rodless Cylinder Direct mount type Series / Basic type Improved durability

More information

Rotary Actuator/Vane Type

Rotary Actuator/Vane Type Rotary Actuator/Vane Type CRB2 Series : 1, 15, 2, 3, 4 Standard Type Free Mount Type Many combinations available! Standard type/crb2 Series Piping ports are located on the flat surface. Fittings can be

More information

Wide Type Parallel Style Air Gripper

Wide Type Parallel Style Air Gripper Wide Type Parallel Style ir Gripper ø, ø6, ø2, ø25 Weight Max. % reduction 585 g 525 g ø6, Opening/Closing stroke: 3 mm RoHS Weight reduced by the change of the body shape and internal construction M Dust

More information

Slide Unit. Bore size. ø15 (2) ø10 (2) ø16 (3) ø20 (2) Ball bushing bearing Slide bearing. ø25 (3) (3) ø32 (3)

Slide Unit. Bore size. ø15 (2) ø10 (2) ø16 (3) ø20 (2) Ball bushing bearing Slide bearing. ø25 (3) (3) ø32 (3) Slide Unit Series CX/M/L Slide Bearing/CX:ø, ø, ø5 M:ø, ø6, ø0, ø5, ø3 Ball Bushing Bearing/L:ø, ø6, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy

More information

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types

Air Cylinder. New. New RoHS. 6 types. Series CJ2. are. added to the mounting types. 4 types 7 types ir Cylinder Ø 6, Ø 1, Ø New RoS Double foot ead flange Double-side bossed added to the mounting types. 4 types 7 types New or Ø 6, 3 types are 6 types Double foot Double-side bossed ead flange ead cover

More information

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping.

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping. Dual Rod Cylinder / Series ø,,,,, Dual rod cylinder with guide function suitable for pick & place applications. Ball bushing bearings and slide bearings are standard for all series. Dimensions for ball

More information

Mechanically Jointed Rodless Cylinders

Mechanically Jointed Rodless Cylinders Mechanically Jointed Rodless Cylinders MY Series Basic short type (Rubber bumper) MY Series Bore sizes ø, ø, ø0 added MYB MY Basic standard type (ir cushion) MYB MYB Series MYM MYC MY MY T Bore sizes ø,

More information

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state

More information

Series MHZJ2. How to Order MHZJ2 16 D F9PV. Body option. Nil. Port. Port

Series MHZJ2. How to Order MHZJ2 16 D F9PV. Body option. Nil. Port. Port Parallel Type ir Gripper How to Order 1 1 2 Bore size mm 1mm 1mm 2mm mm MHZJ2 1 D F9PV Number of fingers 2 2 fingers D S C ction Double acting Single acting (normally open) Single acting (normally closed)

More information

Rotary Table/Rack & Pinion Type

Rotary Table/Rack & Pinion Type Rotary Table/Rack & Pinion Type Series :,,,,,,,, 0, 0, 0 CRB CRB MSU CRJ CR CRQ MSZ CRQX X MRQ D- 6 Compact Rotary Table with Low Table Height Easy mounting of workpiece. Table I.D/O.D tolerances : B H9/h9

More information

Rotary Table/Rack & Pinion Style

Rotary Table/Rack & Pinion Style Rotary Table/Rack & Pinion Style Series :,,,,,,,, 0, 0, 0 CRB CRBU CRB CR CRQ CRQX X D- Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, C 00-0-Main Office: () -0-Outside Local rea:

More information

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil

How to Order D 30 D M9BW. Made to Order Specifications Bore size Number of. Rod end configuration Cylinder stroke (mm) Nil With auto switch RSG RSDG With auto switch (uilt-in magnet) uilt-in Magnet Cylinder Model If a built-in magnet cylinder without an auto switch is required, there is no need to enter the symbol for the

More information

Non-rotating Double Power Cylinder. Double Power Cylinder MGZ. (without non-rotating MGJ MGP -Z MGP MGPW MGQ MGG MGC MGF MGT D- -X

Non-rotating Double Power Cylinder. Double Power Cylinder MGZ. (without non-rotating MGJ MGP -Z MGP MGPW MGQ MGG MGC MGF MGT D- -X Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) MGJ -Z W MGQ MGG MGC MGF MGT 23 D- -X Non-rotating Double Power Cylinder Double extension output

More information

MGZ. Non-rotating Double Power Cylinder. Double Power Cylinder MGJ MGP MGPW MGQ MGG MGC MGF MGT D- -X

MGZ. Non-rotating Double Power Cylinder. Double Power Cylinder MGJ MGP MGPW MGQ MGG MGC MGF MGT D- -X Non-rotating Double Power Cylinder Double Power Cylinder (without non-rotating Series Series R mechanism) 23 MGJ -Z W MGQ MGG MGC MGF MGT D- -X Tube rod diameter External dimension Non-rotating Double

More information

Compact Guide Cylinder with Lock

Compact Guide Cylinder with Lock Compact Guide Cylinder with Lock Series,,,, ø,,, ø0 CLG CL CN2 MLC Drop prevention when the pressure of air source is decreased or the residual pressure is released. Drop prevention for press fitting jig

More information

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR2 CRU2 CR1 MSU CRJ Rotation 360 type MSQ 360 MSZ MSQ MRQ Series Variations Page Rotating angle 80 to 0 170

More information

69% 30.5 mm 16 mm. Compact Guide Cylinder. Compact. lighter 0.32 kga0.1 kg (Compared with the current MGP-Z series, ø16, 10 mm stroke) Weight

69% 30.5 mm 16 mm. Compact Guide Cylinder. Compact. lighter 0.32 kga0.1 kg (Compared with the current MGP-Z series, ø16, 10 mm stroke) Weight Compact Guide Cylinder ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 RoHS Compact Overall length shortened New s ø80, ø100 added. Port thread types NPT, G added. Height shortened JMGP ø32 25 mm stroke

More information

Series MHZ2/MHZJ2. Parallel Type Air Gripper. Series MHZJ2 with dust cover introduced! New finger options added to Series MHZ2 standard type.

Series MHZ2/MHZJ2. Parallel Type Air Gripper. Series MHZJ2 with dust cover introduced! New finger options added to Series MHZ2 standard type. CAT.E273- B Parallel Type Air Gripper Standard Type With Dust Cover Series MHZ2/MHZJ2 Series MHZJ2 with dust cover introduced! New finger options added to Series MHZ2 standard type. Integrated linear guide

More information

Basic type / Direct mount type

Basic type / Direct mount type Basic type / Direct mount type Series / ø, ø, ø, ø, ø, ø, ø, ø, ø3 CYS CYL CY CYF Courtesy of Steven Engineering, Inc.- Ryan Way, South San Francisco, CA 0-30-Main Office: () -0-Outside Local Area: (00)

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator Series Rack & Pinion Style/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm 360 type 360 CR2 CRU2 CR1 MSU CRJ CR1 MSQ MSZ MSQ MRQ Series Variations Standard Made to Order Rotating angle

More information

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New: CAT.ES-3 E -UK Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating

More information

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added.

Air Cylinder. New RoHS. Series CJ2. are. added to the mounting types. Improved amount of mounting freedom Head cover with boss is added. ir Cylinder ø1, ø16 Double foot Double-side bossed added to the mounting types. 4 types 7 types Improved amount of mounting freedom Head cover with boss is added. Head flange are Double foot Double-side

More information

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU

Compact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for

More information

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping.

Dual rod cylinder with guide function suitable for pick & place applications. Adjustable stroke range: 0 to 5 mm. Axial foot piping. Dual Rod Cylinder J/ Series ø, ø, ø, ø, ø, Dual rod cylinder with guide function suitable for pick & place applications. Ball bushing bearings and slide bearings are standard for all series. Dimensions

More information

Double Power Cylinder. Non-rotating Double Power Cylinder. Series MGZ. Series MGZR (without MGJ MGP MGQ MGG MGC MGF MGZ MGT. non-rotating mechanism)

Double Power Cylinder. Non-rotating Double Power Cylinder. Series MGZ. Series MGZR (without MGJ MGP MGQ MGG MGC MGF MGZ MGT. non-rotating mechanism) Non-rotating Double Power Cylinder Series Double Power Cylinder Series R (without non-rotating mechanism) 2 Non-rotating Double Power Cylinder Double extension output power!! Our unique construction doubles

More information

C85 (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 C75 Series: ø32, ø40

C85 (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 C75 Series: ø32, ø40 ISO Cylinder (ISO 6432) Series: ø8, ø10, ø12, ø16, ø20, ø25 Series: ø32, ø40 RoS Part numbers set for actuators with mounting brackets, rod end brackets and auto switches available. Now it is not necessary

More information

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length

3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional

More information

Compact Hydraulic Cylinder

Compact Hydraulic Cylinder ompact Hydraulic ylinder Series HQ HQ Series HQ HK HN HM HS H2 H Nominal pressure:. MPa ore size :,,,,,, . MPa ompact Hydraulic ylinder Double cting/single Rod Series H Q ø, ø, ø, ø, ø, ø, ø With uto Switch

More information

Compact Rotary Actuator

Compact Rotary Actuator Compact Rotary ctuator CRQ2 Series Rack & Pinion Type/:,,,, : 17 mm : mm : 29 mm : 33 mm : 37 mm CR 2 CR1 MSU CRJ CR1 CRQ2 MSQ MSZ Rotation 360 type 360 CRQ2 MSQ MRQ Series Variations Page Rotating angle

More information

Series MXH/ ø6, ø10, ø16, ø20

Series MXH/ ø6, ø10, ø16, ø20 Compact Slide Series / ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. CL MLG CNA CNG MNB CNS CLS CB CV/MVG

More information

10, 15, 20, 30, 40 MSQX

10, 15, 20, 30, 40 MSQX Possible to transfer a workpiece at low-speed. Rotation time adjustment range: 1 to 5 ( s/90 ) Lowspeed Standard Low-Speed Rotary ctuator / Series :,,,, :,,, Model,,,,,,,,,,,,,, Rotation time adjustment

More information

3-Position Rotary Table

3-Position Rotary Table -osition Rotary Table Series CR1 Stop position adjustment range From center: Rotation range: 0 to 9 The desired position is adjustable to between 0 and 9 from the centered position to both the right and

More information

Dual-Rod Cylinder Compact Type

Dual-Rod Cylinder Compact Type CAT.ES-7 B Dual-Rod Cylinder Compact Type New Made to Order additionally released. (For details, refer to page 22.) Auto switch can be installed from 3 directions. Reverse Series CXSJ /ø, ø0, ø, ø, ø2,

More information

SeriesMHZL2 How to Order

SeriesMHZL2 How to Order Parallel Type ir Gripper Long Stroke SeriesMHZL2 How to Order 1 2 2 ore size Number of fingers 2 2 fingers 1mm mm 2mm 2mm MHZL2 D S C ction Double acting Single acting (normally open) Single acting (normally

More information