Applied. ATTENTION! 1200 lb WEIGHT LIMIT L-25 MINI TOWER INSTRUCTIONS REVISED: 10/24/2017 PROUDLY MADE IN THE U.S.A.

Size: px
Start display at page:

Download "Applied. ATTENTION! 1200 lb WEIGHT LIMIT L-25 MINI TOWER INSTRUCTIONS REVISED: 10/24/2017 PROUDLY MADE IN THE U.S.A."

Transcription

1 1 L-25 MINI TOWER ATTENTION! 1200 lb WEIGHT LIMIT

2 BILL OF GOODS QTY: (1) 25' L-25 Mini Tower (1) HINGED BASE ASSEMBLY (1) 10 TOWER TRUSS (1) 7 TOWER TRUSS (1) 3 TOWER TRUSS (1) HEAD BLOCK (1) SLIDE BLOCK (4) LEGS W/ FOOT LEVELER ASSEMBLY (4) LEG BRACES (1) WINCH (1) CABLE (1) SAFETY BLOCK STOP (1) SLIDE BLOCK CLEVIS PIN TOWER HARDWARE (40) 3/8 1/4" GRADE 5 BOLT SETS WITH (40) WASHERS AND (40) FLANGE NUTS LEG HARDWARE (9) 3/8 X 3 1/2" GRADE 5 BOLT SETS WITH (16) WASHERS AND (8) FLANGE NUTS (3) 3 1/2" QUICK RELEASE T-PINS WINCH HARDWARE (5) 3/8 1/4" GRADE 5 BOLT SETS WITH (5) WASHERS AND (5) FLANGE NUTS SAFETY STOP HARDWARE (1) 1/2 X 4 1/2" GRADE 8 BOLT SET WITH (2) WASHERS AND (1) NUT (1) SET OF BUILD L-25 MINI TOWER REQUIREMENTS FOR SAFE USE 1) Build Tower on flat surface. 2) For outdoor use, 3/4 plywood is suggested under tower column and thick wood or metal plates should be used under leveling pads. 3) All leveling pads must be seated solidly. 4) All hardware must be Grade 5 minimum. THIS TOWER SHOULD BE ASSEMBLED/ERECTED BY QUALIFIED RIGGERS. 2 Shipped on 1 pallet? Electronics Proudly Made in USA ALWAYS...IF YOU HAVE QUESTIONS, PLEASE CALL! (757)

3 X 3 T-PINS 1/2 x 4 1/2" HEXHEAD Slide Block Clevis Pin X 45 3/8 x 1 1/4" HEXHEAD X 2 1/2 FLAT X 61 3/8 FLAT WASHERS 1/2 NUT 10' Tower Truss MT-25-10TS X 53 3/8 FLANGE NUTS X 9 3/8 x 3 1/2" HEXHEAD 7' Tower Truss MT-25-7TS L-25 MINI TOWER PARTS SHEETS / PER TOWER X 4 Leg MT-25-LEG X 4 Safety Bar MT-25-SAFETY Leg Brace MT-25-LB Cable ' Tower Truss MT-25-3TS Head Block MT-25-HB Winch Leg & Base Leveling Assbly MT-25-LA 3 Slide Block MT-25-SB Hinged Base Assembly MT-25-BS

4 STEP#1 BASE ASSEMBLY L-25 MINI TOWER 4 A) Assemble 4 legs to hinged base assembly with (4) 3/8-16 x 3 1/2 grade 5 bolts using (2) flat washers and (1) nut for each. B) Assemble a leg brace to each of the legs using a 3/8-16 x 3 1/2 grade 5 bolt and (2) flat washers and (1) nut for each. Attach 3 of the braces as shown using the t-pins and leave the brace out on the slide plate side.

5 L-25 MINI TOWER STEP#2 5 WINCH & TOWER ASSEMBLY A) Attach winch using (5) 3/8-16 x 1 1/4 grade 5 bolts using (1) flat washer and (1) nut for each. B) Wind the cable onto the winch paying close attention that the cable does not cross itself. C) Remove bolts and pivot hinge to attach tower sections.

6 L-25 MINI TOWER STEP#3 6 TOWER ASSEMBLY A) Attach the tower sections and the head block using the required grade 5 3/8-16 x 1 1/4 bolts and (1) flat washer and (1) nut for each. B) Attach the slide block to the assembled tower. Note: Check the hole locations on the slide block for the model truss you are using. Some bolts may have to be inserted before the slide block is installed on the tower.

7 STEP#4 ATTACH CABLE & RAISE TOWER L-25 MINI TOWER 7 A) Unwrap the cable and feed it around the head block (remove and replace retaining pins above the pulleys) and connect to the slide block aligning the thimble between the angles and inserting the clevis pin. B) If towers are outside, now is a good time to attach the guy wires. Refer to the engineering document for number and locations of guy wires. Rope over head block. C) We suggest attaching a rope over the top of the tower, down the other side and secured at a location you can reach from the ground. Have 1 person pull the rope while 2 people walk up the tower to vertical. Disconnect the rope once the tower is secure.

8 L-25 MINI TOWER STEP#5 8 Secure Tower Check List 1) Tower should be standing erect and level 2) All outriggers attached to base and 3 outrigger braces secured to tower. 3) The winch attached to tower. 4) The cable routed thru head block (pins reinstalled in head block) 5) Cable attached to slide block and slide block located at bottom of tower. A) With tower fully raised, insert the (8) 3/8-16 x 1 1/4 bolts, washers and nuts to secure hinge section.

9 L-25 MINI TOWER STEP#6 9 Raising The Structure Note: Each winch must have a MINIMUM of 300 lbs of load to work properly. Each winch on each tower must be cranked in unison to prevent binding. A) With structure attached, (minimum of 300 lbs each winch) raise to a height that will allow the final leg brace to be installed with a (1) 3/8-16 x 3 1/2 grade 5 bolt, (2) washers and (1) nut. All of the slack should be removed from all of the braces with the leveling screws.

10 L-25 MINI TOWER STEP#7 10 Safety Bar 1/2" washer 1/2" washer 1/2" nut Safety bar 1/2" bolt Slide block A) After your system is at the required height, the safety bar should be set on each tower. This is accomplished by using the ladder side of the tower to reach the trim height of the system and tighten the bar as shown. Locate to inside of main chords.

PORTA-DOCK, INC. 100A 1284 ALUMINUM CANTILEVER BOAT LIFT

PORTA-DOCK, INC. 100A 1284 ALUMINUM CANTILEVER BOAT LIFT Page 1 of 7 PORTA-DOCK, INC. 100A 1284 ALUMINUM CANTILEVER BOAT LIFT Thank you for purchasing our product! Please read these instructions and follow them step by step. * STEP 1. Separate and group like

More information

155A 2500 LB. Gear Drive Winch ALUMINUM NARROW PONTOON LIFT

155A 2500 LB. Gear Drive Winch ALUMINUM NARROW PONTOON LIFT 05/31/05 Page 1 of 7 155A 2500 LB. Gear Drive Winch ALUMINUM NARROW PONTOON LIFT Thank you for purchasing a PORTA-DOCK product. *Please read these instructions and follow them step by step.* STEP 1. Locate

More information

Pontoon Assembly Instructions and manual. Read before using hoist.

Pontoon Assembly Instructions and manual. Read before using hoist. Page 1 Pontoon Assembly Instructions and manual. Read before using hoist. For Models 32BL18, 32BL22, 32BL25 and 42BL28 R Model 32BL22 Shown Proudly Made in Michigan By NuCraft Metal Products 402 Southline

More information

L-16 Crank-Up Lift Instruction & Operation Manual 2012

L-16 Crank-Up Lift Instruction & Operation Manual 2012 L-16 Crank-Up Lift Instruction & Operation Manual 2012 722 Blue Crab Road Newport News VA 23606 Toll Free 800-883-0008 Phone 757-591-9371 Fax 757-591-9514 WINCH INSTALLATION - READ THIS FIRST - (1) The

More information

42A FLB WOOD BUNKS 43A FLB ALUMINUM BUNKS ALUMINUM CANTILEVER BOAT LIFT

42A FLB WOOD BUNKS 43A FLB ALUMINUM BUNKS ALUMINUM CANTILEVER BOAT LIFT Page 1 of 9 42A --- 1265 FLB WOOD BUNKS 43A --- 1265 FLB ALUMINUM BUNKS ALUMINUM CANTILEVER BOAT LIFT Thank you for purchasing our product! Please read these instructions and follow them step by step.*

More information

150 lb. Hopper Assembly

150 lb. Hopper Assembly 1819-3 4/05 The 150 lb. Hopper Assembly is NOT designed for single-point suspension. The upper cross brace is designed for supporting the drop tube ONLY. This Hopper Assembly is to have Two-point suspension

More information

PORTA-DOCK, INC. 65A 1155 DOUBLE PERSONAL WATERCRAFT LIFT

PORTA-DOCK, INC. 65A 1155 DOUBLE PERSONAL WATERCRAFT LIFT Page 1 of 9 PORTA-DOCK, INC. 65A 1155 DOUBLE PERSONAL WATERCRAFT LIFT Thank you for purchasing our product! Please read these instructions and follow them step by step.* STEP 1. Separate and group like

More information

PORTA-DOCK, INC. 100A 1200 LB. 84 WIDE ALUMINUM CANTILEVER BOAT LIFT 102A 1200 LB. 113 WIDE ALUMINUM CANTILEVER BOAT LIFT

PORTA-DOCK, INC. 100A 1200 LB. 84 WIDE ALUMINUM CANTILEVER BOAT LIFT 102A 1200 LB. 113 WIDE ALUMINUM CANTILEVER BOAT LIFT Page 1 of 7 PORTA-DOCK, INC. 100A 1200 LB. 84 WIDE ALUMINUM CANTILEVER BOAT LIFT 102A 1200 LB. 113 WIDE ALUMINUM CANTILEVER BOAT LIFT Thank you for purchasing our product! Please read these instructions

More information

LADDERS. Fiberglass Stepladder CSA Grade 1 - RED. Fiberglass Stepladder CSA Grade 1 - YELLOW. Wood Stepladder - 89 Series w/black End Caps

LADDERS. Fiberglass Stepladder CSA Grade 1 - RED. Fiberglass Stepladder CSA Grade 1 - YELLOW. Wood Stepladder - 89 Series w/black End Caps Fiberglass Stepladder CSA Grade 1 - RED Fiberglass Stepladder CSA Grade 1 - YELLOW Non-conducive Fiberglass Rails Double Riveting on each step Heavy duty molded plastic top Back-up Plates Reinforce all

More information

SPAN 400 SPAN 400. Data Sheet. SPAN 400 Data Sheet Revision: 0 Date: 24/09/2008 Copyright 2008 Instant UpRight Limited

SPAN 400 SPAN 400. Data Sheet. SPAN 400 Data Sheet Revision: 0 Date: 24/09/2008 Copyright 2008 Instant UpRight Limited Data Sheet SPAN 400 SPAN 400 Data Sheet - 0 - Revision: 0 HORIZONTAL BRACE 223 2.0 m Horizontal Brace 1912 1.7 105 2.5 m Horizontal Brace 2496 2.0 221 3.0 m Horizontal Brace 3048 2.4 Tube - Material :

More information

Pontoon Assembly Manual Read before using hoist

Pontoon Assembly Manual Read before using hoist Page 1 Pontoon Assembly Manual Read before using hoist For Models 32BL18, 32BL22, 32BL25 and 42BL28 R Model 42BL25 Shown Proudly Made in Michigan By NuCraft Metal Products 402 Southline Rd. Roscommon,

More information

MAXI-LITE ML 15/ML 20 SERIES LIGHT TOWER PARTS MANUAL ALLMAND BROS. INC P.O. BOX 888 HOLDREGE, NE 68945

MAXI-LITE ML 15/ML 20 SERIES LIGHT TOWER PARTS MANUAL ALLMAND BROS. INC P.O. BOX 888 HOLDREGE, NE 68945 Maxi-Lite ML 15/ML 20 MAXI-LITE ML 15/ML 20 SERIES LIGHT TOWER PARTS MANUAL ALLMAND BROS. INC P.O. BOX 888 HOLDREGE, NE 68945 PHONE: 308/995-4495, 1-800/562-1373 ALLMAND FAX: 308/995-5887 ALLMAND PARTS

More information

NIGHT-LITE PRO PARTS MANUAL

NIGHT-LITE PRO PARTS MANUAL NIGHT-LITE PRO PARTS MANUAL Serial Number 1978PRO08 and Up ALLMAND BROS. INC P.O. BOX 888 HOLDREGE, NE 68949 PHONE: 308/995-4495, 1-800/562-1373 ALLMAND FAX: 308/995-5887 ALLMAND PARTS FAX: 308/995-4883

More information

SECURITY RAPID DEPLOYABLE SECURITY SOLUTIONS WE VE DONE THE HARD PART NOW JUST APPLY THE SECURITY SYSTEM

SECURITY RAPID DEPLOYABLE SECURITY SOLUTIONS WE VE DONE THE HARD PART NOW JUST APPLY THE SECURITY SYSTEM RAPID DEPLOYABLE SOLUTIONS MINI 1 2 towers per pallet Portable Mobile Security Tower When looking for a portable, easy to manage security tower, look no further than our TRIME-Mini Tower 1. monitoring.»

More information

Replacement Parts Catalog

Replacement Parts Catalog Parts Catalog This catalog contains information on the replacement part kits available from Werner Co. These kits are made to OEM quality standards and contain complete detailed installation instructions.

More information

150 lb. Hopper Assembly

150 lb. Hopper Assembly 1819-3 2/05 The Assembly is NOT designed for single-point suspension. The upper cross brace is designed for supporting the drop tube ONLY. This Hopper Assembly is to have Two-point suspension as stated

More information

OPERATING & INSTRUCTION MANUAL

OPERATING & INSTRUCTION MANUAL 251 Welsh Pool Rd Exton, PA 19341 610-941- 4333 www.safetyhoistcompany.com OPERATING & INSTRUCTION MANUAL VH-300 BRIGGS & STRATTON VH-300 HONDA IMPORTANT RETAIN THIS MANUAL For instruction on assembly

More information

PW Cantilever Lift: Part Number: Instructions and Safety Tips 1200 Ibs Capacity

PW Cantilever Lift: Part Number: Instructions and Safety Tips 1200 Ibs Capacity www.shoremaster.com 1200 PW Cantilever Lift: Part Number:1017507 Instructions and Safety Tips 1200 Ibs Capacity 1. 2. 3. 4. 5. CAUTION - PUT SAFETY FIRST Before attempting to install or operate this hoist,

More information

Serial Number Range. Jib-Hoist. from SN Part No

Serial Number Range. Jib-Hoist. from SN Part No Serial Number Range Jib-Hoist from SN 56306 Part No. 645045 Rev B May 2010 2 Jib-Hoist Part No. 645045 How to Read Your Serial Number Part No. 645045 Jib-Hoist 3 Table of Contents This manual is updated

More information

Polaris RANGER 800 Syle Mount

Polaris RANGER 800 Syle Mount Part #: 101330 Hardware Kit: HK-056, HK-031 Kit Components: Qty Part Description 1. Winch Mount 1... Fairlead Bracket 1... Fairlead Converter Bracket 6.... 3/8 x 1 HF Bolt 6. 3/8 SAE Flat Washers 8. 3/8

More information

STANDARD 80 SERIES GUYED TOWER GENERAL USE FEATURES. Phone (309) Fax (309) The Industry Standard

STANDARD 80 SERIES GUYED TOWER GENERAL USE FEATURES. Phone (309) Fax (309) The Industry Standard G GUYED TOWERS - 80 STANDARD 80 SERIES GUYED TOWER 80 SERIES GENERAL USE The ROHN Model 80 Guyed Tower is designed with variable sized legs and braces to allow construction to heights of 1000. This tower

More information

Installation Instructions: (Part # SB612822) 2014 GM 2500/3500 M1 Front Bumper Kit

Installation Instructions: (Part # SB612822) 2014 GM 2500/3500 M1 Front Bumper Kit NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included Qty 93-9665 M1 Front Bumper 1 93-9656 Winch Mounting Plate 1 93-9650 Frame Rail Support Bracket

More information

2015+ Mustang S550 AlumaLift System Installation instructions for FR3Z-16796/7-BL

2015+ Mustang S550 AlumaLift System Installation instructions for FR3Z-16796/7-BL 2015+ ustang S550 Alumaift System nstallation instructions for FR3Z-16796/7-B Thank you for choosing this Drake uscle Cars product for your vehicle. Please read these instructions carefully. ake sure you

More information

Assembly & Operator s Manual

Assembly & Operator s Manual Assembly & Operator s Manual LiftGator XTR 1200lbs Removable Liftgate TM Visit our website at: www.liftgator.com WARNING: Read the entirety of this manual before using the LiftGator. Failure to do so can

More information

Midwest Industries, Inc. Ida Grove, IA Page 1

Midwest Industries, Inc. Ida Grove, IA Page 1 SSV40108HAC - Hydraulic Hoist with 120 Volt Pump SSV40108HDAC - Hydraulic Hoist, Deep Water, with 120 Volt Pump SSV40108HDC - Hydraulic Hoist with 12 Volt Pump SSV40108HDDC - Hydraulic Hoist, Deep Water,

More information

Build an electric Scoot-car

Build an electric Scoot-car 513 Build an electric Scoot-car Designed by ROBERT W O O L S O N Here's a sidewalk special for young hot rodders that safely takes the corner on two wheels, has two forward speed and brakes that stop on

More information

SUPER 47D CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING GROUP DRAWING NUMBER

SUPER 47D CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING GROUP DRAWING NUMBER SUPER 47D CLEANER PARTS SET UP WITH BRUSH SCREEN CLEANING PAGE GROUP DRAWING NUMBER..1...2...3..4....5 & 6..7.....8..9.10.....11.12.13 Thru 14.....15A.16 Thru 23..24..25..26.27 Thru 29...30A.31 Thru 32...33

More information

SET-UP INSTRUCTION & PRE-OPERATION CHECKLIST SNAPPER 21" STEEL DECK COMMERCIAL WALK BEHIND MOWERS

SET-UP INSTRUCTION & PRE-OPERATION CHECKLIST SNAPPER 21 STEEL DECK COMMERCIAL WALK BEHIND MOWERS SET-UP INSTRUCTION & PRE-OPERATION CHECKLIST SNAPPER 21" STEEL DECK COMMERCIAL WALK BEHIND MOWERS INTRODUCTION: The SNAPPER Walk Behind Mowers are shipped almost fully assembled and require minimal set-up.

More information

Installation Instructions

Installation Instructions Description Instructions given in this bulletin apply to either a standard, unshielded or high-performance, shielded antenna. The antenna consists of a two-piece reflector, braced by a back structure;

More information

ITEM NO DESCRIPTION STUD CENTER WEIGHT ITEM NO DESCRIPTION STUD CENTER WEIGHT ITEM NO DESCRIPTION STUD CENTER WEIGHT NARROW FRAMES WALK THROUGH FRAMES

ITEM NO DESCRIPTION STUD CENTER WEIGHT ITEM NO DESCRIPTION STUD CENTER WEIGHT ITEM NO DESCRIPTION STUD CENTER WEIGHT NARROW FRAMES WALK THROUGH FRAMES NARROW FRAMES Stud Cent e r ITEM NO DESCRIPTION STUD CENTER WEIGHT NF3H-2W NF5H-2W NF6H-2W NF6H-3W 3 H X 2 W 5 H X 2 W 6 4 H X 2 W 6 4 H X 3 W 2 4 4 4 16 LBS 25 LBS 33 LBS 40 LBS WALK THROUGH FRAMES ITEM

More information

LOAD/ANTI TWO-BLOCK INDICATOR INSTALLATION MANUAL

LOAD/ANTI TWO-BLOCK INDICATOR INSTALLATION MANUAL LOHD -985 SYSTEM LOAD INDICATOR 10400 35400 4 400 8100 1 LOAD/ANTI TWO-BLOCK INDICATOR INSTALLATION MANUAL 1 WARNING The LOHD 985 System servicing hydraulic and lattice cranes is designed to aid the fully

More information

Assembly and Installation Manual Model 4000 Vertical LIFT MCD p/n

Assembly and Installation Manual Model 4000 Vertical LIFT MCD p/n Assembly and Installation Manual Model 4000 Vertical LIFT MCD p/n 1630-01 (Rev 11.2016) A. Parts Description 1. Check the following parts to ensure you have all the items necessary to assemble your new

More information

Assembly Guide ELECTRIC. Model Numbers: C1. (English) /14/11

Assembly Guide ELECTRIC. Model Numbers: C1. (English) /14/11 Assembly Guide Model Numbers: 12601559 12601578 12601663 12601664 12601665 12601688 12601514 12601514-C1 ELECTRIC (English) 42804641 09/14/11 2 ASSEMBLY GUIDE A, B, C, Assembly: CAUTION: For your safety,

More information

ARTICEL Drywall Panel Hoist

ARTICEL Drywall Panel Hoist Operation Manual ARTICEL 50790 51289 Drywall Panel Hoist Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments,

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Accessory Application Publication No. WINCH MOUNT P/N 08L74-HR3-A20 After 13 TRX420 (All except TRX420FA/FPA) After 13 TRX500 (All except TRX500FA/FPA) MII 15067 Issue Date Revised:

More information

A CAB KIT (Shown with GLASS DOORS KIT A-11859)

A CAB KIT (Shown with GLASS DOORS KIT A-11859) Cab Installation Instructions for John Deere One Series, 1023E, 1025R and 1026R Model Series A-11976 CAB KIT (Shown with GLASS DOORS KIT A-11859) FOR USE WITH OPTIONAL KITS; A-11859 GLASS DOORS WITH NON-OPENABLE

More information

t h e Po s s i b i l i t i e s ar e En d l e s s!

t h e Po s s i b i l i t i e s ar e En d l e s s! t h e Po s s i b i l i t i e s ar e En d l e s s! WWW.GLOBALTRUSS.COM t h e Po s s i b i l i t i e s a r e E n d l e s s! CONTENTS: F14 Square Truss pg. 4-5 F23 Triangle Truss pg. 6-8 F31 Single Tube Truss

More information

Side Dump Tarp System Driver or Passenger Stowing Non-Sealed applications

Side Dump Tarp System Driver or Passenger Stowing Non-Sealed applications Roll Rite, LLC and its entire staff would like to not only Thank You but congratulate you on your purchase of one of what we feel to be the finest line of tarping systems in the industry. Side Dump Tarp

More information

IB-FAS3 Mar Type FAS THRU 115Kv Amp 61 KA Momentary. Vertical-Break, Gang-Operated Outdoor Air Disconnect Switch.

IB-FAS3 Mar Type FAS THRU 115Kv Amp 61 KA Momentary. Vertical-Break, Gang-Operated Outdoor Air Disconnect Switch. IB-FAS3 Mar. 2014 Type FAS3 7.5 THRU 115Kv 600 1200 Amp 61 KA Momentary Vertical-Break, Gang-Operated Outdoor Air Disconnect Switch Page 0 Contents Subject Page Receiving and Handling................................................

More information

Lbs Kgs Ft M

Lbs Kgs Ft M Installation Instructions for 92600 ATV Winch 3000 lb. Rated Pull SPECIFICATIONS Rated line pull: 3000 lbs. (1360kgs) single line Motor: Permanent magnetic DC 12V with 1.2 hp. /0.9kw output Gear: Differential

More information

Midmark Track Light Installation

Midmark Track Light Installation Midmark Track Light Installation [Full size ceiling template is available: 003-1287-00] Applies to Models: 153910 (-002) 153656 (-001) Language of origin: English Physical Requirements warning Equipment

More information

Head Terminal Repair Parts. Hopper Repair Parts

Head Terminal Repair Parts. Hopper Repair Parts Head Terminal Repair Parts #61686200 - Mild Steel 1 1 61685400 6" Lagged Roller 2 1 81498800 Head Terminal Weldment 3 2 03018900 Bearing 1 5/16" Flange 4 1 14979900 CRR 1 5/16" x 20 13/16" 5 2 12003000

More information

60-72 Chevrolet C10 Power Rack & Pinion Kit Instructions # , , &

60-72 Chevrolet C10 Power Rack & Pinion Kit Instructions # , , & 60-72 Chevrolet C10 Power Rack & Pinion Kit Instructions # 8011740-01, 8011900-01, & 8011920-01 Unisteer offers a limited warranty against all manufacturer defects of their kits and supplied parts. Unisteer

More information

DODGE DAKOTA 3 KIT INSTALLATION INSTRUCTIONS KIT# 60043

DODGE DAKOTA 3 KIT INSTALLATION INSTRUCTIONS KIT# 60043 DODGE DAKOTA 3 KIT INSTALLATION INSTRUCTIONS 2000-2002 KIT# 60043 Installation of a Performance Automotive Group body lift kit will change the vehicle s center of gravity and handling characteristics both

More information

Tray Box Former. Parts List & Illustrations FIGURE 8-28A RAIL & FINGER ASSEMBLY AUTO LIDDER ~ = VARIABLE PART. W. E. Plemons Machinery Services, Inc.

Tray Box Former. Parts List & Illustrations FIGURE 8-28A RAIL & FINGER ASSEMBLY AUTO LIDDER ~ = VARIABLE PART. W. E. Plemons Machinery Services, Inc. FIGURE 8-28A RAIL & FINGER ASSEMBLY ITEM PART NO. DESCRIPTION QTY. 1 0032700 BAR, LID HOPPER GUIDE MT (34") 1 ~ 0032701 BAR, LID HOPPER GUIDE MT (42") 1 2 0061300 SUPPORT PAD, LIDDER 1 3 0033800 LEFT RAIL,

More information

SERVICE BULLETIN SB.DSL rev02

SERVICE BULLETIN SB.DSL rev02 DSL 505 Rear Delt / Pec Fly Cable Repair Applies to DSL 505 Rear Delt / Pec Fly built prior to 5/16/2017 Issue/Symptoms On some machines using the 1/8 diameter lift cables, the cam cables may twist and

More information

MOUNT BRACKET PARTS and HARDWARE: Installation parts with * come loose in hardware kit bag. Other parts are preassembled

MOUNT BRACKET PARTS and HARDWARE: Installation parts with * come loose in hardware kit bag. Other parts are preassembled INSTALL INSTRUCTIONS C-DMM-2006 Dash Monitor Mount 2017-2019 F-250, 350, 450 Pickup, F-450 and 550 Cab Chassis, 2015-2019 Ford F-150 and 2018-2019 Expedition Notes: 1. The C-DMM-2000 series Dash Monitor

More information

WINCH MOUNT KIT FOR HONDA RANCHER P/N ASSEMBLY / OWNERS MANUAL. Application WINCH KIT NO. 25-9xxx

WINCH MOUNT KIT FOR HONDA RANCHER P/N ASSEMBLY / OWNERS MANUAL. Application WINCH KIT NO. 25-9xxx WINCH MOUNT KIT FOR HONDA RANCHER P/N 25-1081 ASSEMBLY / OWNERS MANUAL Application WINCH KIT NO. 25-9xxx Before you begin, please read these instructions and check to be sure all parts and tools are accounted

More information

AmTryke Adult Recumbent Model JT2000 #50-FC-2000

AmTryke Adult Recumbent Model JT2000 #50-FC-2000 AmTryke Adult Recumbent Model JT2000 #50-FC-2000 TOOLS Needed for Assembly 5 mm Allen Wrench 8 mm Socket or Wrench 10 mm Socket or Wrench 14 mm Socket or Wrench 15 mm Socket or Wrench 22 mm Socket or Adjustable

More information

AmTryke Adult Recumbent Model HP1000 #50-HC-1000

AmTryke Adult Recumbent Model HP1000 #50-HC-1000 AmTryke Adult Recumbent Model HP1000 #50-HC-1000 TOOLS Needed for Assembly 5 mm Allen Wrench 8 mm Socket or Wrench 10 mm Socket or Wrench 14 mm Socket or Wrench 15 mm Socket or Wrench 22 mm Socket or Adjustable

More information

TABLE OF CONTENTS. Ram Assembly

TABLE OF CONTENTS. Ram Assembly TABLE OF CONTENTS DUC Cover------------------------------------------------------------------------------------ 00 Table of Contents----------------------------------------------------------------------------

More information

INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: Application: Honda Rancher TRX420

INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: Application: Honda Rancher TRX420 INSTALLATION INSTRUCTIONS WINCH MOUNTING KIT Part Number: 75660 Application: Honda Rancher TRX420 Your safety, and the safety of others, is very important. To help you make informed decisions about safety,

More information

Page: REV 3: Add drill and tap information to Figure 4 DRILL #3, TAP 1/4-28 BOTH ENDS.

Page: REV 3: Add drill and tap information to Figure 4 DRILL #3, TAP 1/4-28 BOTH ENDS. REVISION DESCRIPTION: 1) Page: 32-03 MEMO: Step 4 should not be bold. Fix WD-1213 callout in Figure 3. Page: 32-04 REV 3: Add drill and tap information to Figure 4 DRILL #3, TAP 1/4-28 BOTH ENDS. Add make

More information

SUPER 49B SET UP WITH BR PAGE NUMBER

SUPER 49B SET UP WITH BR PAGE NUMBER SUPER 49B SET UP WITH BR PAGE NUMBER..1...2...3..4....5 & 6..7.....8..9.10.....11.12.13 Thru 14.....15A.16 Thru 23..24...25A..26.27 Thru 29...30.31 Thru 32...33 ITEM PAGE PART NO. NO. NUMBER QTY. All 26

More information

We Rv Cranes are engaged in Manufacturing and Trading a qualitative assortment of Goods Lift, Hoist Crane, EOT Crane, EOT Trolley and much more.

We Rv Cranes are engaged in Manufacturing and Trading a qualitative assortment of Goods Lift, Hoist Crane, EOT Crane, EOT Trolley and much more. +91-8048079951 Rv Cranes https://www.indiamart.com/rvcranes/ We Rv Cranes are engaged in Manufacturing and Trading a qualitative assortment of Goods Lift, Hoist Crane, EOT Crane, EOT Trolley and much more.

More information

Patriot. Aluminum and Steel 5spring. Step #1 Tarp Spool with Gear Motor (Includes Instructions for Optional Wind Deflector)

Patriot. Aluminum and Steel 5spring. Step #1 Tarp Spool with Gear Motor (Includes Instructions for Optional Wind Deflector) Aluminum and Steel 5spring Qty. Component Parts Description: LONG BOX: (1) 103 Aluminum Tarp Axle (2) 98 Upper Arms with 90 Degree Elbow (2) Lower Aluminum ( 84 ) (1) Aluminum Cross Tube SMALL HARDWARE

More information

SCALE HOPPER & LEG EXT. Scale hopper Leg Extension Kits Operator/Parts Manual

SCALE HOPPER & LEG EXT. Scale hopper Leg Extension Kits Operator/Parts Manual Scale hopper Leg Extension Kits Operator/Parts Manual OM-72100-LEGEXT-0317 PRINTED IN U.S.A. Table of Contents Table of Contents PARTS...3 Personnel operating or working around this equipment should read

More information

Agri-Fab OWNER'S MANUAL. Model No POINT HITCH TRAILER.

Agri-Fab OWNER'S MANUAL. Model No POINT HITCH TRAILER. Agri-Fab OWNER'S MANUAL Model No. 45-0353 3-POINT HITCH TRAILER CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts the fastest way to purchase

More information

Annexure B (1)- Engineering Instructions for Installation of Aerial OFC

Annexure B (1)- Engineering Instructions for Installation of Aerial OFC Annexure B (1)- Engineering Instructions for Installation of Aerial OFC INSTALLATION PRACTICE OF SELF SUPPORTING METAL FREE AERIAL OPTICAL FIBER CABLE 1. SCOPE: This Engineering Instruction (EI) deals

More information

Start-up and Operation

Start-up and Operation Start-up and Operation NEVER FORGET THAT ANY MACHINE CAN BE VERY DANGEROUS WHEN NOT OPERATED CORRECTLY AND SAFELY. ALWAYS VISUALLY CHECK TO MAKE SURE THAT ALL PERSONS ARE CLEAR BEFORE TURNING ON ANY CONTROLS.

More information

READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY

READ CAREFULLY - FAILURE TO FOLLOW INSTRUCTIONS AND SAFETY RULES MAY RESULT IN SERIOUS INJURY Owner s Manual LSP20H + LSP04H Cantilever Pontoon Lift LSP20H LS3120 mainframe bundle LS3102H H-unit bundle LS3103 accessory box LSP04H LS3104 extension bundle LS3113 accessory box 4' READ CAREFULLY -

More information

BLACKBIRD INSTALLATION SUPPLEMENT

BLACKBIRD INSTALLATION SUPPLEMENT BLACKBIRD INSTALLATION SUPPLEMENT 2008 GM 2500 AND 3500 6.6 DURAMAX DIESEL VERSION 5-08 Parts Included in Installation Kit Before beginning installation, check the parts kit thoroughly against the parts

More information

assembly guide ELECTRIC Model Numbers: Estimated time required for assembly: 1 Hour (English) /02/10

assembly guide ELECTRIC Model Numbers: Estimated time required for assembly: 1 Hour (English) /02/10 assembly guide Model Numbers: 11601514 11601559 11601578 Estimated time required for assembly: 1 Hour ELECTRIC (English) 42804382 6/02/10 2 ASSEMBLY GUIDE A, B, C, Assembly: CAUTION: For your safety, before

More information

DC Series Installation Manual (# )

DC Series Installation Manual (# ) DC Series Installation Manual (# 101630) Page 1 of 33 In this booklet you will find: TOWER INSTALLATION... 3 U-Bolt Style mount... 4 Side Frame Style mount... 4 PIVOT INSTALLATION... 5 External Pivot Installation:

More information

MxV INSTALLATION GUIDE MxV Torsion Spring High Lift Door Models DR0810-TS-3 thru DR0818-TS-3

MxV INSTALLATION GUIDE MxV Torsion Spring High Lift Door Models DR0810-TS-3 thru DR0818-TS-3 MxV INSTALLATION GUIDE MxV Torsion Spring High Lift Door Models DR0810-TS-3 thru DR0818-TS-3 340 Gateway Park Drive North Syracuse, NY 13212 Phone: 315-463-7348 Toll Free: 866-235-7468 Fax: 315-463-8559

More information

RC/RR MODEL FLAP GATES GENERAL DESCRIPTION DESIGN CONSTRUCTION

RC/RR MODEL FLAP GATES GENERAL DESCRIPTION DESIGN CONSTRUCTION GENERAL DESCRIPTION The Orbinox model RC and RR Flap Gates are designed for discharge lines such as levees, sewer lines and drainage conduits. The flap stays closed preventing water back-flow, and it opens

More information

Parts Manual Oxford Mermaid

Parts Manual Oxford Mermaid Parts Manual Oxford NO PART NUMBER DESCRIPTION QTY SERIAL NO. 1 80008 Seat arm security screw (5/16 UNF) 1 2 24-020 Seat arm security screw (M8) 1 80800.052 Seat support clamp Kit 4 81-40020 Thrust washer

More information

YAMAHA VIKING WINCH MOUNT

YAMAHA VIKING WINCH MOUNT YAMAHA VIKING WINCH MOUNT Verify style of winch you will be installing, 4 hole standard (3.0 x 4.875 ) will fit without any modification. Two hole style (3.10 apart) and Wide 4 hole (3 x 6.60 ) will require

More information

SERVICE SHEET 40" WALK-BEHIND POWER TROWEL MODEL FT40 WARNING

SERVICE SHEET 40 WALK-BEHIND POWER TROWEL MODEL FT40 WARNING 40" WALK-BEHIND POWER TROWEL WARNING To reduce the risk of injury, all operators and maintenance personnel must read and understand these instructions before operating, changing accessories, or performing

More information

UNAVCO Polar GPS System Component List SNOW SITE Version 1.0, December PROJECT STATION NAME PREPARED BY DATE SHIPPED

UNAVCO Polar GPS System Component List SNOW SITE Version 1.0, December PROJECT STATION NAME PREPARED BY DATE SHIPPED UNAVCO Polar GPS System Component List SNOW SITE Version 1.0, December 7 2012 PROJECT STATION NAME PREPARED BY DATE SHIPPED COMPONENT NOMINAL # ACTUAL # NOTES X = DEFAULT (X) = OPTIONAL MONUMENT 1.5" pipe

More information

Ford Fairlane Rack & Pinion Kit Instructions #

Ford Fairlane Rack & Pinion Kit Instructions # 1963-1965 Ford Fairlane Rack & Pinion Kit Instructions # 8011570 Unisteer offers a limited warranty against all manufacturer defects of their kits and supplied parts. Unisteer will not honor any warranty

More information

HEALTH AND SAFETY MANUAL

HEALTH AND SAFETY MANUAL HEALTH AND SAFETY MANUAL Title: Ladders (Portable & Fixed) Approved by: Greg Savoy Rev. 4/1/08 1 Purpose/Scope: This section is intended to prescribe rules and establish minimum requirements for the construction,

More information

FIT SERIES FIT-3 W/ LEG PRESS

FIT SERIES FIT-3 W/ LEG PRESS FIT SERIES FIT-3 W/ LEG PRESS ASSEMBLY INSTRUCTIONS Part # 734820 Rev C. Revision:4/04/03 KEY 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 32 33 34 35 36 37 38 39 40 4 42 PART #

More information

Installation Manual. For. Trident Boat Lifts

Installation Manual. For. Trident Boat Lifts Installation Manual For Trident Boat Lifts Page 2 Safety Precautions 1. Your boat lift is a heavy duty piece of equipment. It is important that all persons that may operate this unit have read and understood

More information

A Simplified Index of Mooney M-18 Drawings at the NASM

A Simplified Index of Mooney M-18 Drawings at the NASM A Simplified Index of Mooney M-18 Drawings at the NASM Dwg. No. Dwg. date Title Models Remarks IDnum Price 0000 23-Aug-54 M-18 Aileron Crank Mooney M-18 17 x 22 DD-0029487 $2.10 0000 [Lower Pick-Up Strap

More information

INSTRUCTIONS, (FORD) SUPER DUTY INSTALLATION KIT (C2 PICKUP LIFTGATES)

INSTRUCTIONS, (FORD) SUPER DUTY INSTALLATION KIT (C2 PICKUP LIFTGATES) LIFT CORPORATION Sht. 1 of 20 DSG# M-14-32 Rev. B Date: 05/31/2017 INSTRUCTIONS, (FORD) SUPER DUTY INSTALLATION KIT (C2 PICKUP LIFTGATES) FORD SUPER DUTY F-250 PICKUP TRUCKS, 1999-2016 FORD SUPER DUTY

More information

Model 1101 & Accessories

Model 1101 & Accessories The cost effective alternative to expensive motorized units and inefficient scaffolding. Adjustable Wor k Platfor m Model 1101 & Accessories Meets applicable U.S. ANSI and OSHA Standards for rolling work

More information

CONTENTS. Model & Parameter List 3. Installation Specification of Guyed Tower 5. Installation Specification of Tapered Tower 13

CONTENTS. Model & Parameter List 3. Installation Specification of Guyed Tower 5. Installation Specification of Tapered Tower 13 USER S MANUAL 1 CONTENTS Model & Parameter List 3 Installation Specification of Guyed Tower 5 Installation Specification of Tapered Tower 13 Configuration Specification of Batteries 15 Electric Wiring

More information

vertical cradle lifts installation instructions

vertical cradle lifts installation instructions vertical cradle lifts installation instructions models 7,000 lb. thru 45,000 lb. important: read this manual before beginning installation of cradle lift. 5560 Ulmerton Road Clearwater, Florida 33760 1.800.878.5560

More information

MAINTENANCE WORK INSTRUCTION. Mech OFF Replace Head Pulley CVXXX

MAINTENANCE WORK INSTRUCTION. Mech OFF Replace Head Pulley CVXXX OPF MAINTENANCE WORK INSTRUCTION PYXIS DOCUMENT CLEAN TEMPLATE SCOPE NOTE: SPECIAL TOOLING REQUIRED PREPARATION AND INFORMATION CVXXX Head Pulley The purpose of this document is to detail the safe replacement

More information

OPERATOR S MANUAL R-Series Roust-a-Bout

OPERATOR S MANUAL R-Series Roust-a-Bout December 2017 OPERATOR S MANUAL R-Series Roust-a-Bout! Before operatingthis lift, readand understandthis Operator s Manual. Become familiar with the potentialhazards of thisunit. Call SUMNER if youhaveanyquestions.

More information

KROFTMAN CONTAINER SHELTER TC812

KROFTMAN CONTAINER SHELTER TC812 KROFTMAN CONTAINER SHELTER CONTENT FRAME P82-FR 82-0 82-02 82-03 82-0 82-05 82-06 82-07 parts list frame part numbers main frame base plan, frame plan available hight inside detail 0 detail 02, 03 Roof

More information

MLI PARTS & SERVICE MANUAL

MLI PARTS & SERVICE MANUAL MLI PARTS & SERVICE MANUAL Part No. M00971 A Printed in the USA MLI INDUSTRIAL PRO SERIES MATERIAL LIFTS It is the responsibility of the user to read, understand and obey all safety rules before attempting

More information

CLUB SERIES HIP AB/ADDUCTOR

CLUB SERIES HIP AB/ADDUCTOR CLUB SERIES HIP AB/ADDUCTOR ASSEMBLY INSTRUCTIONS Part # 718601 Rev E 1 Revision: 1/2/03 KEY PART # DESCRIPTION QTY KEY PART # DESCRIPTION QT Y 1 71710xx TOWER 1 22 3102915 3/8 X 3-1/ BOLT 2 1A 6692601

More information

600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS

600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS 600 SERIES STANDARD DUTY STRAIGHT TRACK INSTALLATION INSTRUCTIONS PLEASE READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING. A. BI-PARTING TRAVEL 1. Before raising track into position, determine location of

More information

250P Manure Spreader

250P Manure Spreader 0P Manure Spreader Illustrated Parts Breakdown Page - Page Page Page Page Page Page Page Page Page Page Page Page Page Page - Page Page Page 0 Complete Front End PTO/Jack/Hitch Assembly Front Pulley Assembly

More information

Basic steps for installing the AmeriGlide Express Dumbwaiter

Basic steps for installing the AmeriGlide Express Dumbwaiter Basic steps for installing the AmeriGlide Express Dumbwaiter 1. Remove Shroud. 2. Mount lower section of Track and Unit to hoistway wall and Brackets. 3. Remove Shipping Bracket from Top of Car. 4. Install

More information

POLARIS SPORTSMAN ACE

POLARIS SPORTSMAN ACE POLARIS SPORTSMAN ACE Winch Mount PART # 101180 Hardware Kit: HK-040, HK-031 Kit Components: Qty. Part Description 1... Winch Mount Plate (101181) 1... Winch Guard (101184) 1... Winch Spacer Kit (101210)

More information

Operating Manual. Electri-Lite

Operating Manual. Electri-Lite Operating Manual Prism Integrated Solutions Inc. Electri-Lite Elevated Flare Ignition System By Prism Integrated Solutions Inc. For product support please contact us at: Toll Free - 877 264 1050 Fax -

More information

ProPass-200 Top Dresser

ProPass-200 Top Dresser Setup Manual Form No. 3365-184 Rev A ProPass-200 Top Dresser Model No. 44700-Serial No. 310000001 and Up Model No. 44701-Serial No. 310000001 and Up Model No. 44704 Model No. 44705 Model No. 44706 Model

More information

SPEEDZTR Parts Manual

SPEEDZTR Parts Manual SPEEDZTR / SPEEDZTR / SPEEDZTR / SPEEDZTR Parts Manual SPEEDZTR / SPEEDZTR / 0 SPEEDZTR / SPEEDZTR / Please read the operator s manual carefully and make sure you understand the instructions before using

More information

Installation and Operation Manual. Manufacturers of Innovative Materials Handling Equipment since 1957.

Installation and Operation Manual. Manufacturers of Innovative Materials Handling Equipment since 1957. SWINGSET DISTRIBUTOR Installation and Operation Manual Manufacturers of Innovative Materials Handling Equipment since 1957. 491 North Emerson Street * Cambridge MN 55008-1316 U.S.A. Toll Free (800) 328-8002

More information

Mounting Body CHAPTER 9

Mounting Body CHAPTER 9 CHAPTER 9 Mounting Body During the build of your car, you will need to trial fit the body numerous times. It is possible to construct a simple moveable rack that can lift the body and then move the body

More information

DWHOIST. Drywall Hoist Assembly & Operating Instructions

DWHOIST. Drywall Hoist Assembly & Operating Instructions DWHOIST Drywall Hoist Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important information

More information

ENVIRO BUSHINGS AN ENVIRO BUSHING FOR EVERY NEED. TOLL FREE

ENVIRO BUSHINGS AN ENVIRO BUSHING FOR EVERY NEED.   TOLL FREE AN ENVIRO BUSHING FOR EVERY NEED TOLL FREE 1-877-235-8300 Means NEVER lubricate For AMF Machines 82-30 and 82-70 OEM # Part # Location OEM # Part # Location 000-024-631 N56012 Starter Pad 070-002-745 N56062

More information

Installation Instructions

Installation Instructions Fisher Engineering P.O. Box 529 Rockland, Maine 04841 June 15, 2004 Lit. No. 27589 Installation Instructions Table of Contents Safety Information... 2 Blade and A-Frame Assembly... 5 Blade Assembly and

More information

Installation Manual. For. PWC 3000 Boat Lifts

Installation Manual. For. PWC 3000 Boat Lifts Installation Manual For PWC 3000 Boat Lifts Page 2 Safety Precautions 1. Your boat lift is a heavy duty piece of equipment. It is important that all persons that may operate this unit have read and understood

More information

INSTALLATION INSTRUCTIONS Winch Mounting Kit Winch Mount Kit: Application: Kawasaki Brute Force

INSTALLATION INSTRUCTIONS Winch Mounting Kit Winch Mount Kit: Application: Kawasaki Brute Force INSTALLATION INSTRUCTIONS Winch Mounting Kit Winch Mount Kit: 70207 Application: Kawasaki Brute Force Your safety, and the safety of others, is very important. To help you make informed decisions about

More information

Health & Safety Policy and Procedures Manual SECTION 22 CRANE SUSPENDED PERSONNEL PLATFORMS

Health & Safety Policy and Procedures Manual SECTION 22 CRANE SUSPENDED PERSONNEL PLATFORMS SECTION 22 CRANE SUSPENDED PERSONNEL PLATFORMS 1. Scope: This policy and procedure applies to the design, construction testing, use, and maintenance or personnel platforms and hosting of personnel platforms

More information

INSTALLATION INSTRUCTIONS PART NUMBER D APPLICATIONS: 2015 W205 Mercedes C W205 Mercedes C450 AMG 2017 W205 Mercedes AMG C43

INSTALLATION INSTRUCTIONS PART NUMBER D APPLICATIONS: 2015 W205 Mercedes C W205 Mercedes C450 AMG 2017 W205 Mercedes AMG C43 INSTALLATION INSTRUCTIONS PART NUMBER D440-0057 APPLICATIONS: 2015 W205 Mercedes C400 2016 W205 Mercedes C450 AMG 2017 W205 Mercedes AMG C43 PARTS LIST Qty Part # Description 1 D443-0045 DINANTronics Elite

More information