Moddit. How to Install a Tomei Front Pipe on a Subaru BRZ. This write up will show how to install a front pipe on a BRZ. Written By: Dung Nguyen

Size: px
Start display at page:

Download "Moddit. How to Install a Tomei Front Pipe on a Subaru BRZ. This write up will show how to install a front pipe on a BRZ. Written By: Dung Nguyen"

Transcription

1 Moddit How to Install a Tomei Front Pipe on a Subaru BRZ This write up will show how to install a front pipe on a BRZ. Written By: Dung Nguyen Page 1 of 10

2 INTRODUCTION With the availability of exhaust systems in the aftermarket world, the Subaru BRZ is quite the contender in the aftermarket community. In this write up, we will show the install of a Tomei Titanium front pipe on our Subaru BRZ. This write up will also work on a Scion FR-S and also for any other brands of front pipes Page 2 of 10

3 How to Install a Tomei Front Pipe on a Subaru BRZ Step 1 How to Remove the OEM Undertrays on a Subaru BRZ Initially, before starting on any project on the front of the car, you would want to get it in the air. Supported by Jack stands. There are various bolts on the back under tray that need to be taken off with a 10mm socket There are 11 Bolts that have to be taken off to remove the black under tray. Step 2 After getting the rear under tray off, its time to move on to the front under tray. Theres 7 black clips that require a flat head to pop out. Be careful not to break the head on these. Once they pop out, just pull them out of the hole. After the Clips are out, go ahead and use the 10mm socket to get the bolts out. There should be (8) 10 mm head bolts holding up the under tray. Once those bolts are taken out, the under tray will drop. Be careful not to damage the tray as it is a key item in the undercarriage of the vehicle Page 3 of 10

4 Step 3 How To Remove The Front Pipe Off Of A Subaru BRZ First step is to unbolt the nuts from the front pipe that connects to the cat back part of the exhaust. Keep these, as they will be reused later on. Step 4 Caution, depending on your region's weather condition, oxidation must make it difficult to remove nuts. Using a 14mm wrench, remove the two nuts holding the frontpipe to the overpipe. Utilizing a 14mm wrench, remove the bolt supporting the front pipe to the transmission mounting bracket Page 4 of 10

5 Step 5 With the front pipe being supported by the hook on the center bracket, separate the front pipe from the catback. Remove front pipe from center bracket. Some pressure on the bracket may be required. Front pipe can now be separated from the overpipe studs. Step 6 Now that you have the Stock front pipe out, you are now ready for the install of the replacement front pipe, or any other exhaust component Page 5 of 10

6 Step 7 How to Install a Tomei Front Pipe on a Subaru BRZ Open the Tomei box and check for all parts. Install the 2 bolt gasket that goes in between front pipe and overpipe. Depending on the weather conditions of your region, rust may have resulted on the overpipe studs, threads may be need to be cleaned. Step 8 Tomei also provides bolt smooth paste to install on the threads on the overpipe. Smooth paste can be substitued with traditional anti seize, Utilizing factory hardware to overpipe, secure but do not tighten the front section of the tomei front pipe Page 6 of 10

7 Step 9 Slip a T-bolt clamp on the rear section with the threaded portion facing up and the head of the tightening bolt facing the driver side. After assembling the two pipes, secure but do not tighten the pipe to support bracket. Step 10 Using the factory donut gasket in between the front pipe and the catback, secure but do not tighten Tomei front pipe to catback using factory hardware. Note: Tomei smooth paste is recommended Page 7 of 10

8 Step 11 Tightening time! Tighten the two 14mm nuts from the overpipe to the front pipe. Secure factory hardware from front pipe to catback. Use smooth paste. Step 12 Secure front pipe to transmission support bracket Page 8 of 10

9 Step 13 Tighten 10mm t-bolt clamp on the front pipe. Step 14 Tomei front pipe has an additional bung near the catback that will be ultilized when installing headers or for tuning. Seal with provided plug if not in use, Page 9 of 10

10 Step 15 So in comparison, the Stock Front Pipe was WAY heavier than the Tomei Titanium front pipe. The gains from the cat removal and the weight loss will definitely make a noticeable difference in performance. The Front pipe gets rid of the secondary cat. Be sure to enjoy the exhaust note and be careful when you're enjoying it. This document was last generated on :09:11 PM Page 10 of 10

Moddit. How to Install the HKS Header W/ Cat on a Subaru BRZ

Moddit. How to Install the HKS Header W/ Cat on a Subaru BRZ Moddit How to Install the HKS Header W/ Cat on a Subaru BRZ This full write up is a step by step process on the removal of the stock exhaust components, to the install of the HKS header with Cat. Written

More information

How to Install a Tanabe Medalion Concept G Exahust on a Subaru BRZ

How to Install a Tanabe Medalion Concept G Exahust on a Subaru BRZ Moddit How to Install a Tanabe Medalion Concept G Exahust on a Subaru BRZ Written By: Terence Chang 2019 www.moddit.com/ Page 1 of 11 TOOLS: Metric Socket Set- 10mm,12mm,14mm,17mm (1) Metric Combination

More information

Turboback Exhaust

Turboback Exhaust 501301 Turboback Exhaust 2014+ Ford Fiesta ST 501200 High Flow Catted Downpipe Page 2 501100 Catback Exhaust System Page 10 501200 High Flow Catted Downpipe 2014+ Ford Fiesta ST Congratulations on your

More information

Moddit. How to Install Raceseng S1/S2 Pulley Kit on Subaru BRZ

Moddit. How to Install Raceseng S1/S2 Pulley Kit on Subaru BRZ Moddit How to Install Raceseng S1/S2 Pulley Kit on Subaru BRZ A quick and simple write up on the Raceseng S1/S2 Pulley Kit install on our Subaru BRZ. Written By: Ruthie 2017 www.moddit.com Page 1 of 11

More information

COBB Tuning Catback Exhaust System MAZDASPEED3

COBB Tuning Catback Exhaust System MAZDASPEED3 572101 COBB Tuning Catback Exhaust System 2010+ MAZDASPEED3 Congratulations on your purchase of the COBB Tuning SS Catback Exhaust System for your 2010+ MAZDASPEED3. The following instructions will assist

More information

Moddit. How to install Stance Subframe Collars into a. This guide will quickly go over how to install subframe collars for your Subaru BRZ.

Moddit. How to install Stance Subframe Collars into a. This guide will quickly go over how to install subframe collars for your Subaru BRZ. Moddit How to install Stance Subframe Collars into a BRZ This guide will quickly go over how to install subframe collars for your Subaru BRZ. Written By: Jesus 2017 www.moddit.com Page 1 of 9 PARTS: Stance

More information

5B HIGH FLOW CATTED DOWNPIPES N54 135i/335i

5B HIGH FLOW CATTED DOWNPIPES N54 135i/335i 5B1202 - HIGH FLOW CATTED DOWNPIPES N54 135i/335i Installation Instructions Front Downpipe Rear Downpipe Congratulations on your purchase of the COBB High Flow Catted Downpipes for your N54 BMW 135i/335i!

More information

Moddit. How to Install an OS Giken Differential into a

Moddit. How to Install an OS Giken Differential into a Moddit How to Install an OS Giken Differential into a Subaru BRZ This guide goes over the steps necessary to remove and install the OS Giken Limited Slip Differential into a Subaru BRZ. This guide may

More information

Page1. ISF Stainless Steel Headers // Part# HDR-004

Page1. ISF Stainless Steel Headers // Part# HDR-004 Congratulations on the purchase of your ISF Stainless Steel Headers and thank you for choosing Sikky Manufacturing. This installation manual is intended to guide you through the removal of the factory

More information

3 Turbo Downpipe Installation Audi A3 / Volkswagen GTI / Volkswagen Jetta 2.0L FSI/TSI Turbo CD100013

3 Turbo Downpipe Installation Audi A3 / Volkswagen GTI / Volkswagen Jetta 2.0L FSI/TSI Turbo CD100013 Please take time to read and understand these installation instructions. APR recommends that installation of this system be performed by a qualified service center or professional muffler installer who

More information

Saab 900 and 9-3 Krona 3 Downpipe Installation Instructions

Saab 900 and 9-3 Krona 3 Downpipe Installation Instructions 1994-2002 Saab 900 and 9-3 Krona 3 Downpipe Installation Instructions 1 What s in the box? X1 Krona 3 downpipe (with or without catalyst) X1 Krona 3 mid pipe assembly X1 02 Bung plug X1 2 bolt flange gasket

More information

#TL B8 A4/Q5 DOWNPIPE/ INSTALLATION INSTRUCTIONS

#TL B8 A4/Q5 DOWNPIPE/ INSTALLATION INSTRUCTIONS #TL100085 B8 A4/Q5 DOWNPIPE/ INSTALLATION INSTRUCTIONS Notes: These instructions were written for a North American specification Audi A4, but other models, like the allroad, A5, and Q5 are similar. When

More information

Please take time to read and understand these installation instructions.

Please take time to read and understand these installation instructions. Please take time to read and understand these installation instructions. CORSA recommends that installation of this system be performed by a qualified service center or professional muffler installer who

More information

Moddit. How to Install Stance Coilovers on a Subaru

Moddit. How to Install Stance Coilovers on a Subaru Moddit How to Install Stance Coilovers on a Subaru BRZ Let's get LOW (and maybe lighter and stiffer suspension)! In this article, we will install Stance ST- ZN6-XS Coilovers on the FRSport Subaru BRZ.

More information

Focus RS Catback

Focus RS Catback 593100 - Focus RS Catback 593100 Focus RS Catback Ford Focus RS 2016-18 Congratulations on your purchase of the COBB Tuning Focus RS Catback Exhaust! The following instructions will assist you through

More information

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Exhaust STOP Please take time to read and understand

More information

Bill of Materials: Please take time to read and understand these installation instructions.

Bill of Materials: Please take time to read and understand these installation instructions. Please take time to read and understand these installation instructions. CORSA recommends that installation of this system be performed by a qualified service center or professional muffler installer who

More information

Exhaust System Installation Turbo Downpipe Audi MKII TT-RS 2.5T CD100028

Exhaust System Installation Turbo Downpipe Audi MKII TT-RS 2.5T CD100028 Please take the time to read and understand installation instructions. APR recommends that installation of this system be performed by a qualified service center or professional muffler installer who has

More information

SLP High Flow Catalytic Converter Kit (96-10) - Installation Instructions

SLP High Flow Catalytic Converter Kit (96-10) - Installation Instructions SLP High Flow Catalytic Converter Kit (96-10) - Installation Instructions The below installation instructions work for the following products: SLP High Flow Catalytic Converter Kit (96-10) Please read

More information

Pypes Polished Shorty Headers (05-10 V6):

Pypes Polished Shorty Headers (05-10 V6): Pypes Polished Shorty Headers (05-10 V6): Introduction: The kit comes complete with replacement hardware and gaskets and can be easily done in your driveway. The hardware supplied for install includes

More information

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED TO ACTIVATE YOUR WARRANTY GO TO: CORSAPERFORMANCE.COM/WARRANTY STOP

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED TO ACTIVATE YOUR WARRANTY GO TO: CORSAPERFORMANCE.COM/WARRANTY STOP IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Performance We ask that you take a few moments to

More information

Saab 9-3 Krona Downpipe Installation Instructions. What's Included:

Saab 9-3 Krona Downpipe Installation Instructions. What's Included: www.kronaperformance.com 2003-2010 Saab 9-3 Krona Downpipe Installation Instructions What's Included: (1) 3 stainless downpipe (with or without catalyst) (1) 3-2.5 stainless downpipe adapter pipe (1) Turbo

More information

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Performance We ask that you take a few moments to

More information

GP603 CHROME HEADER TOYOTA TUNDRA 4.7L 2WD TOYOTA SEQUOIA 4.7L 2WD GIBSON HEADERS ARE 50 STATE SMOG LEGAL

GP603 CHROME HEADER TOYOTA TUNDRA 4.7L 2WD TOYOTA SEQUOIA 4.7L 2WD GIBSON HEADERS ARE 50 STATE SMOG LEGAL GP603 CHROME HEADER 00-04 TOYOTA TUNDRA 4.7L 2WD 01-04 TOYOTA SEQUOIA 4.7L 2WD GIBSON HEADERS ARE 50 STATE SMOG LEGAL Thank you very much for purchasing our Gibson header for your vehicle. If you need

More information

This bumper mounted swing away system works in conjunction with our plate steel bumpers (GVW-BUMPERS).

This bumper mounted swing away system works in conjunction with our plate steel bumpers (GVW-BUMPERS). This bumper mounted swing away system works in conjunction with our plate steel bumpers (GVW-BUMPERS). Note: This swing away is ONLY designed to work with the GoWesty-designed plate steel bumpers (the

More information

FULL LENGTH HEADERS/ CATTED HEAD PIPES

FULL LENGTH HEADERS/ CATTED HEAD PIPES INSTALLATION INSTRUCTIONS INS232 2016-2018 CAMARO 6.2L V8 FULL LENGTH HEADERS/ CATTED HEAD PIPES Part #4044 and 40440 Special Tools required: 10mm, 12mm, 13mm, 15mm Socket and Wrenches, Pliers, Saw, Welder

More information

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Exhaust We ask that you take a few moments to complete

More information

REAR LOWER CONTROL ARMS INSTALLATION INSTRUCTIONS:

REAR LOWER CONTROL ARMS INSTALLATION INSTRUCTIONS: REAR LOWER CONTROL ARMS INSTALLATION INSTRUCTIONS: 2013-UP SCION FRS & SUBARU BRZ ZN6 ZC6 2008-2012 SUBARU WRX & STI GR GV 2015+ Subaru wrx & sti gj Part Numbers: LOSC-0100 LOSU-0100 We recommend that

More information

GP314S-C CERAMIC HEADER

GP314S-C CERAMIC HEADER GP314S-C CERAMIC HEADER 04-06 DODGE MAGNUM RT 5.7L HEMI 2WD 04-06 CHRYSLER 300 C STYLE 5.7L HEMI AWD 2006 DODGE CHARGER 5.7L HEMI 2WD GIBSON HEADERS ARE 50 STATE SMOG LEGAL AUTOMATIC ONLY Thank you very

More information

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Exhaust We ask that you take a few moments to complete

More information

Installation Instructions for Scion FR-S, Toyota FT86, or Subaru BRZ PN-11839, 11937

Installation Instructions for Scion FR-S, Toyota FT86, or Subaru BRZ PN-11839, 11937 Installation Instructions for Scion FR-S, Toyota FT86, or Subaru BRZ PN-11839, 11937 ***** Please compare the parts in the box with the bill of materials provided ***** to assure that you have all the

More information

Installation Time One / Two Hours

Installation Time One / Two Hours Front Caliper (With Bracket) Install Guide 1999-2002 Mustang GT or V6 NOTE: These instructions are for the front driver side caliper, but can also be applied to the passenger side front caliper as well.

More information

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Exhaust STOP Please take time to read and understand

More information

Performance Installs

Performance Installs Performance Installs FK7-6-101-10 Front-Pipe Back Exhaust Installation Instructions for the 27WON Performance Front-Pipe Back Exhaust on 2017+ Honda Civic Hatchback Sport Written By: Barett Strecker 2018

More information

Subaru WRX MRT Turbo Back Exhaust System

Subaru WRX MRT Turbo Back Exhaust System 2015-16 Subaru WRX MRT Turbo Back Exhaust System Part No. 98P113 STOP Verify that all of the following components are included in kit before beginning installation: Part #1 J-Pipe / Downpipe Part #2 Mid-Pipe

More information

ADDICTIVE DESERT DESIGNS. You will need the following tools: - Ratchet - 10mm Socket - 12mm Socket - 14mm Socket - 17mm Socket

ADDICTIVE DESERT DESIGNS. You will need the following tools: - Ratchet - 10mm Socket - 12mm Socket - 14mm Socket - 17mm Socket Preparation: Disconnect the negative battery terminal. Park the vehicle on level ground and set the emergency brake. We recommend reading through the installation instructions in whole before performing

More information

INFINITI Q50/Q60 LOWER DOWNPIPE

INFINITI Q50/Q60 LOWER DOWNPIPE INFINITI Q50/Q60 LOWER DOWNPIPE The Alpha Performance Q60 Red Alpha lower downpipes offer a more pronounced, throaty exhaust note under wide open throttle yet are subdued at idle and while cruising. 2

More information

81-87, 22r/re 4wd, 50 state smog legal header ( k) r 4wd ca only 50 state smog legal header ( k) 1 ct.

81-87, 22r/re 4wd, 50 state smog legal header ( k) r 4wd ca only 50 state smog legal header ( k) 1 ct. InstalLation Instructions rock ripper toy header tm 81-87, 22r/re 4wd, 50 state smog legal header (180302-1-k) 81-84 22r 4wd ca only 50 state smog legal header (180303-1-k) kit contents Header Tube Intermediate

More information

DV8 Tire Carrier Manufacturer Part Number TCSTTB-01 Model Number J104640

DV8 Tire Carrier Manufacturer Part Number TCSTTB-01 Model Number J104640 DV8 Tire Carrier Manufacturer Part Number TCSTTB-01 Model Number J104640 Installation Time: 30 Minutes Tools Required: 19mm Socket 13mm Socket Ratchet T15 Torx Driver T50 Torx Driver Painters Tape Dremel

More information

Install Guide MQB 1.8T/2.0T Cast Downpipe

Install Guide MQB 1.8T/2.0T Cast Downpipe Cast Stainless Steel Performance Downpipe, 8V Audi A3/S3 & MkVII Volkswagen Golf/GTI/R Installation Spiciness Rating (Spicy) Installation of your 034Motorsport Cast Downpipe is a complex process. We recommend

More information

Exhaust Diffuser Installation for Scion FR-S/Subaru BRZ PN-77012

Exhaust Diffuser Installation for Scion FR-S/Subaru BRZ PN-77012 Exhaust Diffuser Installation for Scion FR-S/Subaru BRZ PN-77012 BORLA Performance Industries is proud to offer a truly unique product to the aftermarket Cat-Back industry we started over 30-years ago.

More information

1 ct. 1 ct. 2 ct. 2 ct. 1 ct. 2 ct. 1 ct. 2 ct. 2 ct. 2 ct. Air Injection Tube Gaskets. 1 ct. 4 ct. 4 ct. 1 ct. 2 ct. 2 ct.

1 ct. 1 ct. 2 ct. 2 ct. 1 ct. 2 ct. 1 ct. 2 ct. 2 ct. 2 ct. Air Injection Tube Gaskets. 1 ct. 4 ct. 4 ct. 1 ct. 2 ct. 2 ct. rock ripper tm toy header 88-95 4cyl, 4wd, 50 state smog legal header - 180304-1-k kit contents Header Tube Intermediate Tube Flanges Header Flange Gaskets Exhaust Clamps Header Gasket CARB Decal Air Injection

More information

Installation Instructions and Warranty Information

Installation Instructions and Warranty Information Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 FAX 909.599.6424 Installation Instructions and Warranty Information Part # 1685S 2011-2014 Mustang

More information

Long Tube Header Installation For Ford Mustang GT

Long Tube Header Installation For Ford Mustang GT Long Tube Header Installation For 2005-2008 Ford Mustang GT Precision manufactured using aircraft quality T-304 stainless steel; this system is designed to endure years of heavy use. Installing a Borla

More information

Read all instructions carefully before attempting installation.

Read all instructions carefully before attempting installation. Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 FAX 909.599.6424 Installation Instructions And Warranty Information Ford Ranger/Explorer/Sport Trac

More information

Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3

Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3 Page 1 Installation Manual TWM Performance Short Shifter Cobalt SS/SC, SS/TC, HHR SS, Ion Redline and Saab 9-3 Please Note: It is preferable to park on a flat surface, as you will have to engage and disengage

More information

2016+ Mazda Miata Front & Rear Sway Bar Installation Instructions

2016+ Mazda Miata Front & Rear Sway Bar Installation Instructions Page1 James Barone Racing Aftermarket Parts and Accessories 2016+ Mazda Miata Front & Rear Sway Bar Installation Instructions Tools Required: Jack Lift or ramps Ratchet wrench Torque Wrench 6 and 12 Extension

More information

KIT # CSS-C SUSPENSION LIFT KIT

KIT # CSS-C SUSPENSION LIFT KIT 14385 Veterans Way Moreno Valley, CA 92553 Phone: (951) 571-0212 Fax: (951) 571-0215 2001-2010 CHEVROLET SILVERADO 1500 AND 2500 HD 4WD AND 2WD PICK-UP 1999-2010 CHEVY 2500 4WD PICK-UPS 2001-2010 2500

More information

Header Installation for Ford Mustang GT, PN-17290* Adaptor Pipe PN-60566**

Header Installation for Ford Mustang GT, PN-17290* Adaptor Pipe PN-60566** Header Installation for Ford Mustang GT, PN-17290* Adaptor Pipe PN-60566** These instructions have been written to help you with the installation of your Borla Performance Exhaust System. Please read this

More information

VW & Audi TDI CR140 ECO KIT Installation Guide

VW & Audi TDI CR140 ECO KIT Installation Guide VW & Audi TDI CR140 ECO KIT Installation Guide This guide is to help you install your new Rawtek DPF, EGR & Adblue Delete Exhaust ECO Kit on your (2009-2014) VW / Audi with 2.0l CR140 Diesel Engine. Note:

More information

Subaru 5-Speed Double Adjustable Short Throw Shifter

Subaru 5-Speed Double Adjustable Short Throw Shifter Subaru 5-Speed Double Adjustable Short Throw Shifter 1999+ Subaru Impreza 5-Speed 2004-2005 Subaru Forester XT 5-Speed Congratulations on your purchase of the COBB Tuning Double Adjustable Short Throw

More information

MAC Catback Exhaust (86-93 LX; GT)

MAC Catback Exhaust (86-93 LX; GT) MAC Catback Exhaust (86-93 LX; 94-95 GT) Installation Time: 3-4 hours for a novice, including time for adjustments. Tools recommended: Sawz-all or hacksaw, or exhaust cutoff tool 7/16 deep socket and/or

More information

Please take time to read and understand these installation instructions.

Please take time to read and understand these installation instructions. 2014- Current C7 Corvette Please take time to read and understand these installation instructions. CORSA recommends that the installation of this system be performed by a qualified service center or professional

More information

cfr angle kit INSTALLATION INSTRUCTIONS: 2009-present nissan 370z z infiniti g37 v36 Part Numbers: VOO-akns-0400

cfr angle kit INSTALLATION INSTRUCTIONS: 2009-present nissan 370z z infiniti g37 v36 Part Numbers: VOO-akns-0400 cfr angle kit INSTALLATION INSTRUCTIONS: 2009-present nissan 370z z34 2008-2013 infiniti g37 v36 Part Numbers: VOO-akns-0400 We recommend that installation of all Voodoo13 parts be completed by a professional

More information

Read all instructions carefully before attempting installation. REV DSL

Read all instructions carefully before attempting installation. REV DSL Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 FAX 909.599.6424 Installation Instructions and Warranty Information Part# 6035S/30635S 2005-2008

More information

BRZ & FR-S Stage 1 Turbo Kit Installation Guide

BRZ & FR-S Stage 1 Turbo Kit Installation Guide BRZ & FR-S Stage 1 Turbo Kit Installation Guide 6MT Manual 2013+ Subaru BRZ, Toyota GT86, Scion FR-S Part #: S6Z12GS7A001T 6AT Automatic 2013+ Subaru BRZ, Toyota GT86, Scion FR-S Part #: S6Z12HS7A001T

More information

INSTALLATION INSTRUCTIONS: INDIAN SCOUT HI-OUTPUT GRENADES PART# 18554/18654

INSTALLATION INSTRUCTIONS: INDIAN SCOUT HI-OUTPUT GRENADES PART# 18554/18654 INSTALLATION INSTRUCTIONS: INDIAN SCOUT HI-OUTPUT GRENADES PART# 18554/18654 Congratulations, you have purchased the finest exhaust system available for your motorcycle. Your Vance & Hines exhaust is designed

More information

Installation Instructions and Warranty Information

Installation Instructions and Warranty Information Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 FAX 909.599.6424 Installation Instructions and Warranty Information 6695S 2007-14 5.4/5.8 Ford Mustang

More information

2010 Camaro Long Tube Headers, Coated w/high Flow Cats Use w/#30220

2010 Camaro Long Tube Headers, Coated w/high Flow Cats Use w/#30220 PART #30212 2010 Camaro Long Tube Headers, Coated w/high Flow Cats Use w/#30220 PACKING LIST Before installation, use this checklist to make sure all necessary parts have been included. ITEM CHECK PART

More information

BBK Long Tube Header and Shorty Mid-pipe (05-10 GT):

BBK Long Tube Header and Shorty Mid-pipe (05-10 GT): Time Required: Approximately 6-8 Hours BBK Long Tube Header and Shorty Mid-pipe (05-10 GT): Tools Required: Floor Jack or Ramps Jack Stands (unless you used a ramp) 5mm, 8mm, 10mm, 12mm, 22mm sockets/open

More information

Product: Camaro Spec Adjustable Heavy Duty Sway Bar Package

Product: Camaro Spec Adjustable Heavy Duty Sway Bar Package Product: Camaro Spec Adjustable Heavy Duty Sway Bar Package Part Number: 440-402001-G Applications: Chevrolet Camaro SS, and ZL1 2012 - Current Description: These racing sway bars are engineered to be

More information

Lightweight Tubular Sway Bar Kit Subaru WRX / STi / 09+ FXT

Lightweight Tubular Sway Bar Kit Subaru WRX / STi / 09+ FXT 915250 Lightweight Tubular Sway Bar Kit 2008+ Subaru WRX / STi / 09+ FXT Installation Instructions Congratulations on your purchase of the COBB Lightweight Tubular Sway Bar Kit for your Subaru WRX, STi

More information

1 ct. 2 ct. 1 ct. 1 ct. 2 ct. 2 ct. 2 ct. 1 ct. 2 ct. 4 ct. 4 ct. 1 ct. 2 ct. 8 ct. 2 ct , k 85-95, k. Header Tube.

1 ct. 2 ct. 1 ct. 1 ct. 2 ct. 2 ct. 2 ct. 1 ct. 2 ct. 4 ct. 4 ct. 1 ct. 2 ct. 8 ct. 2 ct , k 85-95, k. Header Tube. rock ripper tm toy header 79-84, 186053-1-k 85-95, 186063-1-k kit contents Header Tube Intermediate Tube Flanges Header Flange Gaskets Exhaust Clamps 5 ft. 16g Wire Wire Connectors Header Gasket Air Injection

More information

Installation Instructions and Warranty Information ~ Toyota Tacoma CatBack 3.5L V6

Installation Instructions and Warranty Information ~ Toyota Tacoma CatBack 3.5L V6 Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 FAX 909.599.6424 Installation Instructions and Warranty Information 40-9021 ~ 2016-17 Toyota Tacoma

More information

Installation instructions

Installation instructions Installation instructions Akrapovič Exhaust Systems: Slip-On for the HONDA CRF450R FOR CLOSED COURSE COMPETITION USE ONLY. NOT INTENDED FOR STREET USE. *503657* www.akrapovic.com www.akrapovic.com Congratulations

More information

97-04 CHEVROLET CORVETTE C5

97-04 CHEVROLET CORVETTE C5 97-04 CHEVROLET CORVETTE C5 IMPORTANT! WARRANTY AND INSTALLATION INSTRUCTIONS Please Forward All Information to Consumer Be sure to review the enclosed instructions prior to beginning the installation

More information

INSTALLATION INSTRUCTIONS Unitronic 3 Turbo-Back Exhaust System for MK5 Jetta /GLI UH020-EXA

INSTALLATION INSTRUCTIONS Unitronic 3 Turbo-Back Exhaust System for MK5 Jetta /GLI UH020-EXA Unitronic recommends that you read through the entire installation instructions prior to beginning the installation to familiarize yourself with the included components, tools required, and procedures

More information

M7 R52S & R53 Cold Air Intake Installation Guide 53-3M7301

M7 R52S & R53 Cold Air Intake Installation Guide 53-3M7301 M7 R52S & R53 Cold Air Intake Installation Guide 53-3M7301 M7 Speed engineers and manufactures the highest quality MINI COOPER accessories and performance parts available anywhere on Planet Earth! Please

More information

Ford Mustang GT Long Tube Header Installation

Ford Mustang GT Long Tube Header Installation 2005-2006 Ford Mustang GT Long Tube Header Installation Precision manufactured using aircraft quality T-304 stainless steel; this system is designed to endure years of heavy use. Installing a Borla Performance

More information

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED

IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Exhaust STOP Please take time to read and understand

More information

Pypes 409 Stainless Steel Violator Cat-back with Polished 304 Tips Installation Guide (98-04 GT/Mach 1)

Pypes 409 Stainless Steel Violator Cat-back with Polished 304 Tips Installation Guide (98-04 GT/Mach 1) Pypes 409 Stainless Steel Violator Cat-back with Polished 304 Tips Installation Guide (98-04 GT/Mach 1) The below installation instructions work for the following products: Pypes 409 Stainless Steel Violator

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS HDX AND SPORTSMAN GRILLE GUARD APPLICATION: 2015-2017 Chevrolet Silverado 2500/3500 PART NUMBER: 45-3780, 40-3785, 57-3780, 57-3785 ITEM QUANTITY DESCRIPTION

More information

Scion FR-S ZN6. GTX2867R Gen2 (Internal Wastegate) Installation Instructions GPP P/N #

Scion FR-S ZN6. GTX2867R Gen2 (Internal Wastegate) Installation Instructions GPP P/N # TURBO KIT Scion FR-S ZN6 Subaru BRZ ZC6 GTX2867R Gen2 (Internal Wastegate) Installation Instructions GPP P/N # 11518000 Vehicle Type Chassis Code Engine Code Transmission Model Year Scion FR-S DBA-ZN6

More information

Read all instructions carefully before attempting installation. REV DSL

Read all instructions carefully before attempting installation. REV DSL Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 FAX 909.599.6424 Installation Instructions And Warranty Information Part # 6830S ~ Small Block Chevrolet

More information

Banks Monster Exhaust System Ford Power Stroke 6.7L Turbo-Diesel F-250/F-350/F-450 Trucks Crew Cab 6.75ft & 8ft bed

Banks Monster Exhaust System Ford Power Stroke 6.7L Turbo-Diesel F-250/F-350/F-450 Trucks Crew Cab 6.75ft & 8ft bed with Installation Instructions Owner smanual Banks Monster Exhaust System 2011-2015 Ford Power Stroke 6.7L Turbo-Diesel F-250/F-350/F-450 Trucks Crew Cab 6.75ft & 8ft bed THIS MANUAL IS FOR USE WITH SYSTEM

More information

GP125S STAINLESS HEADER

GP125S STAINLESS HEADER GP125S STAINLESS HEADER WITH EGR FITTING FORD EXCURSION 6.8L-V-10 2/4WD FORD SUPERDUTY TRUCK F250HD/F350 6.8L-V10 2/4WD GIBSON HEADERS ARE 50 STATE SMOG LEGAL 2/2 WARNING! Do not rely on bumper jacks or

More information

Tuned Length Headers. Special Tools Required: Install Time: Difficulty: Follow these instructions carefully to ensure correct fitment and operation.

Tuned Length Headers. Special Tools Required: Install Time: Difficulty: Follow these instructions carefully to ensure correct fitment and operation. Special Tools Required: welder / saws all Install Time: Approximately 4 Hours Difficulty: 4 out of 5 Follow these instructions carefully to ensure correct fitment and operation. STEP 1 Disconnect the negative

More information

Install Guide B9 Audi A4/A5 2.0T Racing Catalyst

Install Guide B9 Audi A4/A5 2.0T Racing Catalyst Cast Stainless Steel Racing Catalyst, B9 Audi A4/A5 & Allroad 2.0 TFSI Installation Spiciness Rating (Spicy) Installation of your 034Motorsport Cast Racing Catalyst is a complex process. We recommend professional

More information

Installation Instructions and Warranty Information

Installation Instructions and Warranty Information Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 FAX 909.599.6424 Installation Instructions and Warranty Information Part #1627S 1987-95 F-150/Bronco

More information

Installation Guide for Rough Country 30 in. Chrome Series LED Light Bar w/ Hood Mounting Brackets

Installation Guide for Rough Country 30 in. Chrome Series LED Light Bar w/ Hood Mounting Brackets Installation Guide for Rough Country 30 in. Chrome Series LED Light Bar w/ Hood Mounting Brackets Installation Time: 1 Hour Tools Required Trim removal tool (plastic or wood to prevent scratches on the

More information

Max IV Rear Axle Replacement For models after Serial Number and all rear splined axle replacements.

Max IV Rear Axle Replacement For models after Serial Number and all rear splined axle replacements. Max IV Rear Axle Replacement For models after Serial Number 19089 and all rear splined axle replacements. 10/8/03 Max IV Snap Ring Rear Axle replacement.doc Tools required: 9/16 Wrench 6 Extension Steel

More information

For Technical Assistance, call Competition Engineering's Tech Line at (203) , 8:30am-5:00pm Eastern Time COMPETITION ENGINEERING

For Technical Assistance, call Competition Engineering's Tech Line at (203) , 8:30am-5:00pm Eastern Time COMPETITION ENGINEERING INSTALLATION INSTRUCTIONS C2099 SLIDE-A-LINK The Slide-A-Link by Competition Engineering is designed for use in Stock Eliminator and Bracket Racing vehicles. The rigid front mount assembly clamps around

More information

TDR Cold Air Intake for the NC

TDR Cold Air Intake for the NC TDR Cold Air Intake for the NC Year: Models: TDR-CAI-NC Thank you for purchasing the Track Dog Racing Cold Air Intake for the NC. The Cold Air Intake is designed with and very efficient K&N Filter and

More information

MK5 Gen2 GTI Exhaust Installation Instructions

MK5 Gen2 GTI Exhaust Installation Instructions MK5 Gen2 GTI Exhaust Installation Instructions Tools Required Wrenches/sockets: 13, 15, 16, 17, 22 mm Flat-blade screwdriver Penetrating lubricant Summary This document includes instructions for the following

More information

CORKSPORT Power Series Cat Back Exhaust I N S T A L L A T I O N I N S T R U C T I O N S Mazda 6 2.5T PART #: ATK

CORKSPORT Power Series Cat Back Exhaust I N S T A L L A T I O N I N S T R U C T I O N S Mazda 6 2.5T PART #: ATK I N S T A L L A T I O N I N S T R U C T I O N S CORKSPORT Power Series Cat Back Exhaust 2018+ Mazda 6 2.5T PART #: ATK-6-101-12 Need Help With Your Installation? Call (360) 260-CORK PAGE 1 CORKSPORT Power

More information

CAT-BACK EXHAUST FORD FIESTA ST PARTS LIST AND INSTALLATION GUIDE WARNING PARTS INCLUDED INSTALL PROCEDURE TOOLS NEEDED

CAT-BACK EXHAUST FORD FIESTA ST PARTS LIST AND INSTALLATION GUIDE WARNING PARTS INCLUDED INSTALL PROCEDURE TOOLS NEEDED PARTS LIST AND PARTS INCLUDED 1PC STAINLESS STEEL RESONATED MIDPIPE W/ 2-BOLT FLANGE 1PC STAINLESS STEEL MIDPIPE-TO-REAR MUFFLER SECTION 1PC STAINLESS STEEL REAR MUFFLER SECTION 1PC 3" DUAL OFFSET TIPS

More information

2017 Current Ford Raptor HoneyBadger Front Bumper Installation Instructions

2017 Current Ford Raptor HoneyBadger Front Bumper Installation Instructions 2017 Current Ford Raptor HoneyBadger Front Bumper Installation Instructions PREPARATION 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set the emergency brake.

More information

SR Performance Twin 62mm Throttle Body for GT

SR Performance Twin 62mm Throttle Body for GT Required Tools: SR Performance Twin 62mm Throttle Body for 2005-2010 GT Flat-head screwdriver Ratchet Small extension 10mm socket 8mm socket T20 Torx bit Needle nose pliers 5mm allen wrench Recommended

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS ----1075 North Ave. Sanger, CA 93657-3539 toll free: 800-445-3767 web: www.belltechcorp.com---- 6420 SHACKLE & HANGER KIT FORD F-350 Congratulations! You were selective enough

More information

SE761-E Q7 3.0T Exhaust Installation Guidelines

SE761-E Q7 3.0T Exhaust Installation Guidelines SE761-E10-01 Q7 3.0T Exhaust Installation Guidelines Q7 3.0T Exhaust Exhaust Kit Installation Applications Description Q7 3.0T Catback Exhaust SE761-E10-01 Warning: Proper clamp placement! Align clamp

More information

The following information shows the steps to change the rear brake pads and rotors on an E36 chassis.

The following information shows the steps to change the rear brake pads and rotors on an E36 chassis. 1 of 20 1/18/2010 9:15 PM See More DIY Articles Bookmark Site! The following information shows the steps to change the rear brake pads and rotors on an E36 chassis. Disclaimer: The following information

More information

Header Installation For Jeep Wrangler

Header Installation For Jeep Wrangler Header Installation For 2007-2008 Jeep Wrangler Precision manufactured using high quality austenitic stainless steel; this system is designed to endure years of heavy use. Installing a Borla Performance

More information

INSTALLATION INSTRUCTIONS Unitronic 3 Turbo-Back Exhaust System for Golf R UH021-EXA

INSTALLATION INSTRUCTIONS Unitronic 3 Turbo-Back Exhaust System for Golf R UH021-EXA Unitronic recommends that you read through the entire installation instructions prior to beginning the installation to familiarize yourself with the included components, tools required, and procedures

More information

STOP IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED TO ACTIVATE YOUR LIMITED LIFETIME WARRANTY GO TO: CORSAPERFORMANCE.

STOP IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED TO ACTIVATE YOUR LIMITED LIFETIME WARRANTY GO TO: CORSAPERFORMANCE. IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Exhaust We ask that you take a few moments to complete

More information

TENF8046MCD F8X M3/M4 TEST PIPES (REMOVES SECONDARY CATS) **NOT FOR USE ON ROAD VEHICLES / FOR OFF-ROAD AND RACING USE ONLY**

TENF8046MCD F8X M3/M4 TEST PIPES (REMOVES SECONDARY CATS) **NOT FOR USE ON ROAD VEHICLES / FOR OFF-ROAD AND RACING USE ONLY** Turner Motorsport LLC / 1-800-280-6966 / www.turnermotorsport.com DI/DBM 3/21/16 TENF8046MCD F8X M3/M4 TEST PIPES (REMOVES SECONDARY CATS) **NOT FOR USE ON ROAD VEHICLES / FOR OFF-ROAD AND RACING USE ONLY**

More information

ARK Exhaust System DT-S Cat-Back with optional Test Pipe. (SM D, 0213D; TP ) for Scion FR-S and Subaru BRZ (2.

ARK Exhaust System DT-S Cat-Back with optional Test Pipe. (SM D, 0213D; TP ) for Scion FR-S and Subaru BRZ (2. ARK Exhaust System DT-S Cat-Back with optional Test Pipe (SM1202-0113D, 0213D; TP1202-0113) for Scion FR-S and Subaru BRZ (2.0L H4 4U-GSE/FA20) Congratulations on purchasing an ARK Performance premium

More information

Subaru Front Mount Intercooler Kit STI Subaru Front Mount Intercooler Kit STI

Subaru Front Mount Intercooler Kit STI Subaru Front Mount Intercooler Kit STI Subaru Front Mount Intercooler Kit STI 2008-2014 715500 Subaru Front Mount Intercooler Kit STI 2008-2014 Congratulations on your purchase of the Subaru Front Mount Intercooler Kit STI 2008-2014. The following

More information

2007 Current Jeep Wrangler JK Stealth Fighter Rear Bumper With Tire Gate Installation Instructions

2007 Current Jeep Wrangler JK Stealth Fighter Rear Bumper With Tire Gate Installation Instructions 2007 Current Jeep Wrangler JK Stealth Fighter Rear Bumper With Tire Gate Installation Instructions PREPARATION 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS --1075 North Ave. Sanger, CA 93657-3539 local: 559-875-0222 fax: 559-876-2259 toll free: 800-445-3767-- 2511 2 DROP SPINDLE 2WD (Must Use 17 or larger wheels AND be used for 3+

More information

Jeep Grand Cherokee ZJ 4 Suspension Kit

Jeep Grand Cherokee ZJ 4 Suspension Kit 92168800 Jeep Grand Cherokee 93-98 ZJ 4 Suspension Kit Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install this system. In addition

More information