Must-Have Solutions 2015/16. Specialist Automotive Tools. Partner in the

Size: px
Start display at page:

Download "Must-Have Solutions 2015/16. Specialist Automotive Tools. Partner in the"

Transcription

1 Must-Have Solutions 2015/16 Specialist Automotive Tools Partner in the Group

2 KLANN, always one solution ahead. Specialist Tools for Vehicle Service and Repair Range of Services Range of Services Warehouse 96 % of our products listed in the catalogue Demo Van are immediately available. Demo tours giving live demonstrations of our KLANN Training Centre tools in a workshop environment with the aim Quality Control to support specialist dealers and wholesalers Frequent training courses providing in their work. 100 % quality control of practical training in-situ on the vehicle. functional dimensions. Jig Department Development and manufacture of samples and Experimental Garage prototypes for the automotive industry, suppliers For an immediate response to market needs and and garages. requirements and to continually enhance and update our range of tools and systems. On our homepage we offer the following services: Application videos Videos showing practical application of selected KLANN special tools. Main Catalogue Main Catalogue Catalogues/Brochures All our current catalogues and brochures are available for you to download from our website. News Up-to-date information on our latest tool developments. You will find our proven and comprehensive range of specialist tools for vehicle repair in the KLANN Main Catalogue. Please ask for it - free of charge and without commitment. KLANN Information System KLANN Information System We now offer the KLANN Information System KIS on This extensive OEM Part Number Data Base is designed to help you quickly find the corresponding KLANN part number. Our system allows garages to easily identify the KLANN specialist tool they are looking for - for example, for the replacement of a timing belt. The forward-looking KLANN Information System KIS is constantly enhanced with new product ranges. This system provides garages with information on the full range of the high-quality service and specialist tools from KLANN. Partner in der Gruppe 2

3 Must-Have Solutions 2015/16 For a special price please contact your local dealer. KL-5501 Spring Compressor (Stationary) (Patented) Universally suitable for MacPherson suspension and damper strut designs; for example, for those with standard springs, right-hand or left-hand coiled springs, eccentric springs or spring plates, conical springs, springs with a small number of windings, springs with high or varying spring coil pitch. This spring compressor allows the spring to be compressed with its upper spring plate against the lower spring plate, so that the spring shape or the spring coil pitch are no longer an issue. The variably settable spring-compressing assembly, adjustable support column assembly and strut-holding clamp with single-hand operation widen the field of application of the spring compressor to almost any strut or shock absorber while, at the same time, satisfying the highest Health and Safety Standards. No additional accessories needed No damage to the strut tube Allows for one-person operation Mobile use, e.g. with workshop trolley/workbench (KL ) Breaking point: Drive: Max. load capacity: Weight without trolley: 60,000 N 24 mm 15,000 N 46 kg KL Workshop Trolley/Workbench (without tools) The sturdy workshop trolley/workbench KL is designed to be used in conjunction with the stationary spring compressor KL-5501 as well as with the wheel bearing/silentbloc tools of the KL-0039-Series, thus providing you with a professional and mobile workplace for accurate and quick chassis or axle repairs. The large Mulitplex worktop made from solid beech offers the ideal work surface. The convenient push handle and the smooth-running castors (125 mm), two of them are steering castors with brakes, ensure the easy and mobile use of the trolley. The 4 drawers feature an individual locking mechanism as well as a central lock designed to prevent any unintentional opening of the drawers. Each drawer has a load capacity of up to 80 kg. Thanks to the full-extension slides, the drawers can be pulled out completely thus allowing for proper storage, full visibility and easy access to the tools. An ingenious one-drawer-at-a-time interlock mechanism prevents the opening of all drawers at the same time and, as a result, the trolley from tilting/tipping -over NOK * 3

4 KL-9002 Telescopic Safety Spring Compressor (Patented, e.g. US-Patent ) Universally suitable for vehicles equipped with MacPherson Suspension and Damper Struts. Ideal for All-Wheel-Drive vehicles, Transporters and Vans such as Citroën Jumper; Fiat Ducato; Mercedes Vito, V-Class, M-Class, W210 4Matic; Peugeot Boxer, Break; Renault Master etc. Jaw opening min. 40 mm / max. 361 mm; Working travel of piston 305 mm, max. load 27,500 N. Comes with pairs of jaws in size 1 and 2 designed for spring-ø mm. Additional jaws for spring-ø mm are available as accessories. Jaw-mounting device with automatic self-locking mechanism. Adjustable jaw-opening device. Drive features an additional auxiliary drive. Automatic freewheel of the spindle. Also suitable for conical springs. Plastic protective inserts (available as accessories) NOK * Load capacity max. (at 4-times safety factor): Breaking point: Spindle drive: Weight of compressor base body: Weight of compressor base body with jaws size 1 and 2: 27,500 N 110,000 N 24 mm (waf) 6.9 kg 13.4 kg NOK * KL K Coil Spring Pre-Compressor in a Plastic Storage Case, VW-Audi (Pat.) Designed for the latest VW-Audi, Seat, Skoda vehicle models built on the Modular Transverse Matrix (MQB) platform such as VW Golf VII, A3 (8V); as well as for: Audi A1, A3 (8P), TT (8J), Q3 and VW Golf V, Golf VI, Passat (3C, 362, 365), Tiguan, up! etc. The newly-developed Coil Spring Pre-Compressor KL K from KLANN allows for the removal and installation of the specified struts after repairs without the need to perform a wheel alignment that might be required by the manufacturer. A special feature of the spring pre-compressor is that pre-tensioning the spring in-situ on the vehicle enables the strut to be removed without the need for releasing the control arm/drive shaft, suspension ball joint or track rod joint. Due to the unique design of the tool, the shape of the spring is not an issue. The spring pre-compressor is suitable for a wide range of applications, thanks to its compact design comfortably fitting the strut mount area and the interchangeable support plates. Its innovative concept saving job time of up to 25% and eliminating the need for axle work and wheel alignment makes this spring pre-compressor a rewarding investment both for now and the future. Max. load capacity: Max. opening distance*: Compression travel*: Clamping nut drive: * = without support plate 17,500 N 335 mm 110 mm 27 mm Substantial time and cost savings. Eliminates the need for releasing the control arm. Eliminates the need for releasing the drive shaft. Eliminates the need for releasing the track rod end or ball joint. Eliminates the need for wheel alignment. Design allows for use on coil springs regardless of their shape and pitch. All components are available individually as spare parts. Note/Accessory: To remove stuck/tight-fitting shock absorbers/strut units from stub axle clamping bores, it is essential to enlarge the clamping bore with the aid of the KL A spreader tool. 4

5 Must-Have Solutions 2015/16 KL Supporting Device for Control Arm Universal application. The device is used in conjunction with a transmission jack for supporting control arms. The support takes place via the wheel hub thus ensuring the correct raising and lowering of control arms/axles to specified positions. Indispensable when removing and installing a suspension strut. Retaining-Ø: 30 mm NOK * KL A Spreader Tool Kit with Wedge No.1 and No.2 (Patented) Suitable for strut clamping bores as found on : Audi: A3 (8P, 8V), VW: Golf (IV - VII), Passat (3C, 362, 365), BMW, Citroën, Ford, Mercedes: Vito, V-Class, Seat, Škoda, Renault, Peugeot, Japanese vehicles etc. The KL A spreader tool is designed to enlarge strut clamping bores. This procedure is essential for the professional removal of tight-fitting or stuck spring/shock absorber units. As a result, shock absorber units can easily be removed and installed without the risk of damaging the cast iron or aluminium steering knuckle. This tool, thanks to its variably adjustable spreading head, is suitable for use on steering knuckles with a centralised slot, but also especially useful on knuckles with a non-centralised slot as found on VW-Audi, Ford etc. Due to its dimensions and special shape, the replaceable wedge of the spreading head is particularly suitable for aluminium steering knuckles. The wedge is provided with a limit stop to avoid excessive knuckle widening. Other wedges are available as accessories (e.g. for steel knuckles). Fully floating bolts prevent the tool from jamming during knuckle widening NOK * Clamping bore width (max.): Dimensions (wedge No.1): Dimensions (wedge No.2): 75 mm a.: 5.8 mm; b.: 8.5 mm; c.: 4.5 mm a.: 4.5 mm; b.: 8 mm; c.: 10 mm NOK * KL-0021 K Spring Compressor, with Storage Case (Patented) For wishbone and independent multi-link suspensions. Supplied with pairs of pressure plates size 1 and 2. Fits Mercedes 190 (W201), C-Class (W202), CLK (W208), E-Class (W210), S-Class (W140), SL (R129), SLK (R170), W116, W123, W124, and W126 front and rear axle. Ford, GM, Chrysler, VW T2 and LT, Fiat, Hummer, Mazda, Toyota, Nissan, Mitsubishi, Renault, Peugeot, Volvo, etc. This universal telescopic safety spring compressor featuring a 3-point interlock mechanism and an anti-rotation profile to prevent pressure plate distortion, enables the Max. load capacity: quick and safe removal and installation of coil Jaw opening distance: springs on wishbone and independent multi-link suspensions without the need for dismantling the axle Working travel: (exceptions are possible). This provides the user with a Overall length: high level of safety as well as a job time saving of 1-2 hours. Drive: Breaking point: Weight: 30,000 N mm 207 mm mm Size (waf) 19 mm hex 120,000 N 1.5 kg 5

6 KL A Universal Wrench for Inner Track Rod Joint Universally suitable for all the inner track rod joints with a spherical head-ø of from 30 mm to 43 mm THE ideal tool for Mercedes Sprinter, VW Crafter (Ø 43 mm). This wrench allows the quick and easy removal and installation of the specified inner track rod joints to be performed without the need for removing the complete steering system from the vehicle. The tool stands out for its special design, the exchangeable roller inserts equipped with high-grade metal rollers and steel cage, allowing for a wide range of applications. Working range from 30 mm to 43 mm. Universal tool due to its very small outer diameter and large working range of from 30 mm to 43 mm. High-grade metal rollers and steel cage ensure long service life of the tool. Exchangeable roller inserts NOK * Drive: 1/2 Length: 480 mm NOK * Weight: 10.5 kg KL Ball Joint Extractor Set (Pat. e.g. US-Patent 5,906,034) For passenger cars and vans. (size 1 and size 2). Indispensable for the quick and easy separation of ball joint connections in suspension and steering systems. The ever-increasing number of different ball-joints used in today s vehicle suspension and steering systems has led to the need for an ever-widening range of ball-joint extractors for separating ball joint connections from steering knuckles and steering arms. This is mainly due to the different diameters and sizes of the ball-joints. Conical ball-joint pins, for example, require an increased stability and strength of the ball-joint extractors to achieve easy separation. When separating ball joint connections, it is very important that the separation pressure point and the angle can be adjusted on the extractor. The ball joint extractor KL from Klann offers automotive service technicians and mechanics a tool with high stability and universal application possibilites. The extractor can be adjusted to the corresponding ball joint diameter and pivot pin height simply by changing the forks. KL Ball Joint Extractor, Size 2 (Pat. e.g. US-Patent 5,906,034) Universally suitable. Ideal for Mercedes E-Class (W211), CLS (W219), S-Class (W220) and SL (W230) lower suspension ball joint etc. (Fork opening a=24 mm) The ball joint extractor KL (consisting of KL and KL ) is the ideal tool for separating ball joint connections in suspension and steering systems NOK * 6

7 Must-Have Solutions 2015/16 KL Ball Joint Extractor, Size 3 (Pat. e.g. US-Patent 5,906,034) Suitable for suspension ball joints Mercedes Sprinter (1995 onwards), VW LT (1998 onwards); upper ball joint VW T4, Mercedes Citaro EvoBus O 530 stabiliser ball joint etc. (Fork opening a=33 mm) The ball joint extractor KL (composed of KL and KL ) is the ideal tool for separating ball joint connections in suspension and steering systems NOK * NOK * KL K Wheel Bearing Tool Kit without 17 t Hydraulic Cylinder, Mercedes Sprinter/VW Crafter (Patented) Designed for the front axle of Mercedes Sprinter (906) and VW Crafter (2E/2F) vehicles equipped with rear-wheel drive. This tool allows the removal and installation of wheel hub bearing units on the specified front axles to be carried out in situ on the vehicle. For this, the hydraulic cylinder KL is necessary. No need to perform a wheel alignment. KL Pressing Device without Hydraulic Cylinder, Renault Master II / Opel/Vauxhall Movano I Suitable for Renault Master II (model 1998 onwards) and Opel/Vauxhall Movano I (model 1998 onwards), front axle. The KL pressing device is used in conjunction with the Hydraulic Cylinder (17 t) KL and hydraulic pump KL M25 or KL M25 thus enabling for the quick, safe and trouble-free removal and installation of the suspension ball joints on the front upper and lower wishbone. This tool enables even heavily corroded ball joints to be pushed out and replaced within just a few minutes. Removal of the upper or lower wishbone is not necessary NOK * Substantial saving of time, approx. 1 to 2 hours. Quick and professional pressing out and pressing in of suspension ball joints. Hydraulic Cylinder (17 t) KL can universally be used on other KLANN tools to exert thrust or compression force. 7

8 KL A Hydraulic Press Tool Set without Drive, Suspension Ball Joint, Mercedes Suitable for Mercedes W211 (E-Class), W219 (CLS), W220 (S-Class), W230 (SL) front axle, and W163 (M-Class) front and rear axle. The hydraulic press tool set KL A used in conjunction with the Hydraulic Cylinder KL and pressure spindle KL enables suspension ball joints on the lower wishbone to be pressed in and pressed out quickly and without any trouble. Removal and installation of the ball joints can often be carried out in-situ on the vehicle within just a few minutes, without having to dismount the wishbone NOK * Enables the quick, easy and professional removal and installation of suspension ball joints. Thanks to the KLANN-Modular-System, the set can be further enhanced with additional tools which are available as accessories. All components are available individually as spare parts. KL K Wheel Bearing Tool Set (with Mechanical Drive), VW-Audi, BMW, Ford, Seat, Skoda, Opel/Vauxhall Suitable for VW-Audi, BMW, Ford, Seat, Skoda, Opel/Vauxhall, etc. Designed for the quick, safe and professional removal and installation of wheel bearings. The unique design of the pressure pieces enables safe and accurate centring and alignment when changing a wheel bearing. It ensures that when removing and mounting the wheel bearing, the pressing force will be applied on the outer bearing race only, and that when mounting the wheel hub, the pressing force will be applied only on the inner bearing race. This prevents damage to the new wheel bearing. The combination of centring rings and pressure rings creates pressure pieces which can be adjusted accurately to the bearing-ø. Alternatively, a hydraulic 17t drive (accessory) can be used if wheel bearings are heavily corroded or seized in place. Thanks to the possibility to easily upgrade the tool set with other parts of the KL Series such as centring and pressure rings or pressure-/support sleeves, this wheel bearing tool is almost universal in its field of application. It can, for example, also be used to change suspension ball joints or silentblocs. The wheel bearing tool set KL K can also be operated hydraulically. For this, the set has to be used in conjunction with the hydraulic drive KL , hydraulic cylinder KL and a hydraulic pump such as the KL M25. This will be necessary, for example, if wheel bearings are extremely stuck or seized in place NOK * KL Puller Set Suitable for VW-Audi, Alfa Romeo, BMW, Fiat, Ford, Mercedes, Oper/Vauxhall, Porsche, Renault, Seat, Škoda, etc. Designed to press out drive shafts mechanically. Composed of: Puller plate, size 2 (3-, 4-and 5-hole) for pitch circle diameter-ø mm Puller bolt, type B, M12x1.5 (4x) Puller bolt, type B, M14x1.5 (4x) Hex shoulder nut, M14 (4x) NOK * Adaptor 2¼ -14 UNS to M20x2 Spindle M20x2 x 230 mm Even bonded, corroded or heavily seized drive shafts are no longer an issue by using the hydraulic cylinder 17 t (available as accessory). The universal puller set KL can easily be upgraded with additional puller discs, adaptors, spindles and puller bolts. 8

9 Must-Have Solutions 2015/16 KL Slide Hammer Puller (4.8 kg), with Adaptor 2¼ -14 UNS to M18 Designed to extract wheel hubs, half-shafts, drive shafts, brake drums etc. Used in conjunction with the KL-0174-Puller Series. Hammer weight: Length: Connection thread on tie rod: 4.8 kg 690 mm M NOK * KL Wheel Hub Puller, with Adjusting Spindle, without Hydraulic Cylinder (German Utility Model) The KL wheel hub puller enables the quick, safe, and accurate extraction of wheel hub bearing units or wheel hubs. For this, the hydraulic cylinder KL and pull spindle M20 x 550 KL are necessary. Even bonded, seized or corroded wheel hub bearing units or wheel hubs are no longer an issue using this tool. Due to its special design, the wheel hub puller allows for the extraction of a wide range of different wheel hubs with diameters of up to 250 mm. The plates KL and KL are used as spacer/ adjustment plates. They are necessary when, while extracting a wheel hub, the support takes place via the bottom side of the hooks and if the supporting surface is not even NOK * KL B Upgrade Kit, Audi A2/Seat Ibiza/Škoda Fabia/VW Polo, (bearing Ø 72 mm) (Patented) Suitable for vehicles with bearing-ø 72 mm; e.g. Audi A2 (model 2000 onwards), Seat Ibiza (model 2002 onwards), Škoda Fabia (model 2000 onwards) and VW Polo (model 2002 onwards), Fox, etc. The upgrade kit KL B enables the quick and safe installation of wheel hub bearing units without the risk of damaging them. For this, the hydraulic cylinder KL , retaining adaptor KL , retaining adaptor KL , pull spindle M20 KL and clamping nut KL are necessary. To remove wheel hub bearing units, the wheel hub puller KL is required. To remove wheel hub bearing units, the wheel hub puller KL is required NOK * 9

10 KL B Upgrade Kit, VW T5 (bearing Ø 85 mm) (Patented) Suitable for vehicles with bearing-ø 85 mm; e.g. VW T5 front and rear axle, VW Touareg and Porsche Cayenne front axle. The upgrade kit KL B enables the quick and safe installation of wheel hub bearing units without the risk of damaging them. For this, the hydraulic cylinder KL , retaining adaptor KL , retaining adaptor KL , pull spindle M20 KL and clamping nut KL are necessary. To remove wheel hub bearing units, the wheel hub puller KL is required NOK * KL D Upgrade Kit, Volvo/Ford/Mazda Suitable for vehicles with bearing-ø 78 mm, e.g. Ford Focus II, C-Max (from 10/03 onwards); Mazda 3 (from 10/03 until 06/09) Volvo C30, C70 II, S40 II, V50 and for vehicles with bearing-ø 82 mm, e.g. Ford S-Max (from 2006 onwards), Galaxy (from 2006 onwards), Mondeo IV (from 2006 onwards); Volvo S60 II, S80 II, V60, V70 III (from 10/2007 onwards), XC60, XC70 II. Designed for the quick and safe installation of wheel hub bearing units in-situ on the vehicle. For this, the hydraulic cylinder KL , retaining adaptors KL and KL , pull spindle KL , and clamping nut KL are necessary. Due to its special design, this tool ensures that during the installation process the applied pressing force will only be distributed on the outer bearing race and not on the wheel hub. This prevents damage to the bearing. Professional installation of wheel hub bearing units is almost impossible without the use of this tool set. To remove wheel hub bearing units, the wheel hub puller KL is required NOK * KL Wheel Bearing Removal Tool Kit without Hydraulic Cylinder 17 t, Opel/Vauxhall Insignia Designed for the compact wheel hub bearing units that are found at the front and rear axle of Opel/Vauxhall Insignia models from 2008 onwards. The KL wheel bearing tool is used in conjunction with a 17 t hydraulic cylinder (e.g.kl ) and a hydraulic pump (e.g. KL M25 or KL M25), thus allowing for the quick and trouble-free removal of flanged one-piece compact wheel hub bearing units from the front and rear axle. Even severely seized wheel bearings are no longer an issue using the 17 t hydraulic cylinder KL The removal of the steering knuckle/stub axle is not necessary NOK * 10

11 Must-Have Solutions 2015/16 KL Wheel Bearing Tool Set with Hydraulic Cylinder (28 t), Ford Transit Suitable for all the Ford Transit models from 2002 onwards equipped with brake disc fastening screws with pitch circle diameter 97.5 and 111 mm, as well as for Tourneo front axle on vehicles with front or rear wheel drive. To replace the specified brake discs or wheel bearings, it is usually necessary to pull out the wheel bearing along with the hub and brake disc from the wheel bearing housing. This tool set allows the removal and installation of the wheel bearing to be carried out in-situ on the vehicle within a few minutes, without having to dismount the wheel bearing housing. A hydraulic pump such as KL M28 is required to drive the hydraulic cylinder KL NOK * KL Drive Shaft Insertion Tool Suitable for VW-Audi (Touareg etc.) BMW, Mercedes, Opel/Vauxhall, Renault, Peugeot, Porsche (Cayenne etc.) This tool is used for inserting drive shafts into wheel hubs. It is required for those vehicles that feature tight tolerances between the wheel hub and drive shaft splines. Various pull spindles ensure universal application NOK * KL K Pulling Device for Silentbloc (Mechanical Drive) Universally suitable for silentblocs/joint bushes with Ø mm. The KL K pulling device allows for the quick, safe and professional removal and replacement of silentblocs and joint bushes. The mechanical drive included in the set enables the extraction of the silentblocs and joint bushes having an inner bore-ø not smaller than10 mm. The set is composed of: - Retaining adaptor for mechanical spindle - Retaining adaptor for clamping nut NOK * - Pull spindles M10, M12, M14, M16 with corresponding shoulder nuts - Pressure/support sleeves (short design) with Ø (mm): 30/22, 40/32, 46/38, 50/42, 54/46, 58/50, 64/56, 66/58, 70/62, 72/64 - Pressure/support sleeves (long design) with Ø (mm): 44/36, 50/42, 56/48, 62/54, 66/58, 70/62, 74/66, 78/70, 82/74, 84/76 - Molybdenum disulphide paste - Plastic storage case Thanks to the possibility to easily upgrade the tool set with other parts of the KL Series such as centring- and pressure rings or pressure-/support sleeves, this pulling device is almost universal in its field of application; for example, allowing the user to change wheel bearings as well. A 10 t or 17 t hydraulic KLANN Drive (accessories) can be used if silentblocs are very tight-fitting, stuck, or heavily rusted in place. The additional use of a press frame enables also the removal and installation of suspension ball joints etc. The pulling device KL K can also be operated hydraulically. For this, it has to be used in conjunction with the hydraulic drive KL A or KL A, hydraulic cylinder KL and a hydraulic pump such as the KL M25. This will be necessary, for example, when removing and installing bushings and suspension ball joints. 11

12 KL Pulling Device without Hydraulic Cylinder, for Double-Type Silentbloc, VW-Audi, Seat, Skoda, Front Axle Suitable for: Audi A3 (8P1), 05/2003 onwards; Audi TT (8J3, 8J9) from 08/2006 to 06/2010; Seat Altea (5P5, 5P5, 5P8), 03/2004 onwards; Seat Leon (1P1), 05/2005 onwards; Seat Toledo III (5P2) from 04/2004 to 05/2009; Skoda Octavia (1Z3, 1Z5) from 02/2004 to 12/2010; VW Caddy III (2KA, 2KB, 2KH, 2KJ, 2CA, 2CB, 2CH, 2CJ) from 04/2004 to 08/2010; VW EOS (1F7, 1F8), 06/2006 onwards; VW Golf Plus (5M1, 521), 01/2005 onwards; VW Golf V (1K1, 1K5) from 10/2003 to 2009; VW Golf VI (5K1, AJ5), 10/2008 onwards; VW Jetta III (1K2) from 08/2005 to 10/2010; VW Touran (1T1, 1T2, 1T3), 08/2003 onwards; VW Passat (3C2, 3C5, 363, 365) from 03/2005 to 06/2010; VW Scirocco (137), 05/2008 onwards; VW Tiguan 5N, 09/2007 onwards NOK * The KL pulling device allows the quick and safe removal and installation of assembly carrier double-type silentblocs to be performed in situ on the vehicle. For this, the hydraulic cylinder KL and retaining adaptor KL are needed. Releasing or removing the assembly carrier from the vehicle as well as follow-up wheel alignments are not necessary. Substantial time and cost savings. Eliminates the need for releasing or removing the assembly carrier from vehicle. Eliminates the need for wheel alignment. All components are available individually as spare parts. KL Press Tool Set without Hydr. Cyl., VW-Audi, Rear Axle Trailing Arm Suitable for Audi A3 (8P), TT (8J); Seat Altea (5P), Leon (1P), Toledo (5P); Skoda Superb (3U), Oktavia (1Z); VW Eos, Golf V, Jetta III, Passat (3C), Tiguan,Touran, rear axle trailing arm. The press tool set KL used in conjunction with the hydraulic cylinder KL enables the professional and accurate removal and installation of the silentbloc on the rear axle trailing arm without the need for removing the latter from the vehicle NOK * 12

13 Must-Have Solutions 2015/16 KL A Pressing Device without Hydraulic Cylinder, Rear Silentbloc, Ford/Volvo Suitable for the silentblocs that are found at the rear axle trailing arm on: Ford Galaxy (from 05/2006 onwards), Mondeo (from 2007 onwards), S-Max (from 2006 onwards) and Volvo S60/V60 (134/155), XC 60 (156), S80 (124/144), V70/XC70 (135/136). Designed for the quick, safe and professional removal and replacement of the silentblocs that are found on rear axle trailing arms. For this, the KL hydraulic cylinder, KL pressure spindle and KL retaining adaptor are necessary. Removal and installation of the silentblocs can be carried out in situ on the vehicle within just a few minutes, without having to dismount the rear axle trailing arm. Using this tool, even stuck or heavily corroded silentblocs can be pressed out properly and without any trouble. The special design of the support ring and the pressure sleeve allows for the correct positioning of the new silentbloc thus ensuring its correct installation NOK * Pressure sleeeve inner diameter: Inner length (press frame): Outer length (press frame): Ø 70 mm mm 332 mm KL A Set of Sleeves, Ford Focus Suitable for Ford: Focus I and II, C-MAX, Kuga I, Volvo: C30, S40, V50 (models from 2007 onwards) and Mazda: 3 (BK), 5 (CR19, CW), rear axle control arm. Enables quick and safe removal and installation of the silentbloc found at rear axle control arms. For this, the hydraulic cylinder KL , retaining adaptor KL , pressure spindle KL and press frame KL are needed NOK * NOK * KL B Pulling Device for Joint Bush (Mechanical Drive), Mercedes Suitable for Mercedes W124, 190 Series (W201), C-Class (W202, W203, W204), CLK (W208, W209), E-Class (W210) and S-Class (W140), rear axle. The KL B pulling device enables the fast, simple and safe removal and installation of the joint bushes that are found on rear axle wheel bearing housings, without the need for removing the latter from the vehicle. 13

14 KL Hydraulic Cylinder, 17 t Due to its special design as a tubular cylinder, the KL hydraulic cylinder (17 t) can be used to perform pulling as well as pushing operations in conjunction with the corresponding spindles available as accessories. Application: In conjunction with various KLANN tools, the hydraulic-cylinder (17 t) KL can be used for the removal and installation of drive shafts, wheel hubs, wheel bearings, silentblocs and suspension ball joints. A hydraulic pump is needed to drive the hydraulic cylinder KL NOK * Maximum admissible force: 170 kn (17 t) Maximum stroke: 45 mm Maximum oil pressure: 700 bar Maximum volume of oil: 122 cm³ Piston area: 27 cm² Thread in tubular piston: M20 Retaining thread (pressing side): 2¼ -14 UNS Retaining thread (pulling side): M42x2 Cylinder outer diameter: 80 mm Cylinder overall length (piston retracted): 202 mm Cylinder overall length (piston extended): 247 mm Hydraulic fluid connection thread: 3/8 NPT Weight: 5.2 kg KL A Retaining Device for Hydraulic Cylinder KL The retaining device KL A is used in conjunction with a transmission jack (Plunger-Ø 30 mm) thus enabling for the easy and trouble-free operation of all those KLANN tools that are driven by the hydraulic cylinder KL NOK * Retaining-Ø: Weight: 30 mm 2.6 kg KL M25 Hydraulic Hand Pump The hydraulic hand pump KL M25 is used to drive the hydraulic cylinders KL and KL The hydraulic pressure and necessary force can be checked while operating the pump at pressure gauge KL (supplied with the tool set). The pressure gauge features a tonne scale specifically adapted to our KL hydraulic cylinder (17 t) NOK * Weight: Max. Pressure: 7.5 kg 700 bar KL M25 Hydraulic Pump (Pneumatic) The pneumatic hydraulic pump KL M25 can be used as a drive for hydraulic cylinders. Compressed air is used to power the hydraulic pump. The pump is operated by a foot-pedal with 3 positions - for pump, stop and release. Advantage: Both hands free to work NOK * Maximum Pressure: Operating Pressure: Weight: 700 bar 8-12 bar 8 kg 14

15 Must-Have Solutions 2015/ NOK * KL K Universal Line Clamp Set Universally suitable for brake-, fuel-, hydraulic- and power steering lines with 5/16, 3/8, 1/2 union nuts and banjo fittings. Used to seal off opened line connections on brake, fuel, hydraulic and power steering line systems. The universal line clamps are designed to help you prevent any leakage of automotive fluids from opened lines, thus ensuring a proper working environment by eliminating the risk of contamination of the workplace. Size: Length: 5/16, 3/8, 1/2, Banjo-Fitting 109 mm KL KB Brake Pipe-Flaring Tool Kit, with Interchangeable Insert Ø 4.75 mm Suitable for steel, aluminum and copper brake pipes with a pipe-ø of 4.75 mm. This specially designed tool allows flares to be created according to DIN Standard F on a brake pipe in a vice. It also enables the section repair of a brake pipe to be performed directly on the vehicle (for example after accident damage). No need for removing and reinstalling the power train (engine/gearbox) when this tool is used. The interchangeable clamping jaw inserts with a clamping surface of approximately 65 mm ensure the safe clamping of the brake pipe without any risk of damaging it. The KL upgrade kit allows you to use the flaring tool also on the plastic-coated brake pipes (Ø 5.25 mm) on VW-Audi, Seat, Skoda vehicles. Flares are created accurately according to DIN Standard F. Ball-bearing-mounted pressure piece. Ergonomic handle for flaring directly on the vehicle NOK * Built-in holder for clamping into a vice. Substantial time and cost savings. All components are available individually as spare parts. Limit stop for accurate length, thus giving exact material specification for the flare. The brake pipe is securely held in the flaring tool without the risk of deforming the pipe, thanks to the interchangeable clamping jaw inserts. KL Fuel Filter Cap Installation Tool Suitable for the VW-Audi, Seat and Škoda Diesel vehicles with UFI fuel filter unit NOK * Very useful tool allowing for the torsion-free mounting of fuel filter caps on fuel filter; required, for example, after having replaced a fuel filter cartridge. The fuel filter cap installation tool is designed to press the fuel filter cap evenly and in a torsion-free manner into the seal seat in the fuel filter housing. Then, the fuel filter can be fixed according to the manufacturer s instructions. If a fuel filter cap is inserted into the seal seat in the fuel filter housing without the use of our special tool but by means of the fastening screws, there is a risk that the fuel filter cap is subjected to torsional stress during installation which could lead to leakage in the fuel filter unit. 15

16 KL K Injector Nozzle Puller Set (Universal), with Accessories (German Utility Model) Universally suitable for Diesel engines equipped with injector nozzle connecting thread M 14x1.5 (external thread) or M17x1 (internal thread); for example, on: Mercedes: OM611, OM612, OM613, OM 628**, OM 629**; OM639, OM640, OM 642**, OM646, OM646EVO, OM647, OM648 Peugeot, Citroën, Fiat, Lancia, Suzuki: DV6* Ford: 1.6 TDCi (G8DA, G8DB, HHDA, HJA, HHJB) VW-Audi: 2.5, 2.7 and 3.0 V6 Tdi Volvo: 1.6 D (D4164T), 2.2 D NOK * Mazda: Y6 (DV6* [16V]) * Not suitable for Euro 5 [8V] engines. ** V-engines might require the removal of the engine due to lack of space. The injector nozzle puller KL K enables the removal of very tight-fitting injector nozzles to be performed directly on the vehicle, without the need for dismounting the cylinder head. The special extraction bridge and pull spindle allow the user to extract the injector nozzle quickly and easily. The extraction bridge is supported either by the support bolts that are screwed into the locating bores for the valve cover screws (M6) or by the support bars that are positioned on an even surface on the cylinder head. The spacer nuts allow the supporting surfaces to be levelled out, as well as the support bolts in holes with insufficient depth to be adjusted correctly. Thanks to the various upgrade kits which are available as accessories, the injector nozzle puller is suitable for many other engines. KL K Cleaning Tool Set (Universal) for Injector Nozzle Seat (Patentend) Universally suitable for the VW-Audi, Seat, Skoda, Citroën, BMW, Ford, Landrover, Mazda, Mercedes, Opel/Vauxhall, Peugeot, Renault, Toyota, Volvo Diesel engines having a plane injector nozzle seat Ø of 17 mm; also suitable for use on the VW-Audi, Seat, Skoda 2.0 TDI Pumpe-Düse (unit injector) engines having a conical injector nozzle seat Ø of 17 mm. (Engine codes: VW-Audi/Seat/Skoda: AXD, BAY, BLE, BNZ, BNM, BMM, BNV, BKC, BWF, BXE, BLS; Mercedes: OM611, OM612, OM613, OM640, OM642, OM646, OM646 EVO, OM647, OM648, OM668; Peugeot: DT17, DT20, DV4, DV6, DW10, DW12; Citroën: DV4; Renault: F9Q, G9T, G9U, K9K; BMW: M47, M47TU, M57, M57TU; Opel: Z13DT; Ford: G8DA, G8DB, HHDA, HHJA, HHJB; Volvo: D4164T; Mazda: Y6; Toyota: 2AD-FTV, 1KD-FTV; Landrover: TD4, M47D Drive: Length: Cleaning tool-ø: T-Handle 238 mm 7.5 / 17 mm The cleaning tool set enables the quick and professional cleaning of both plane and conical injector nozzle seats. Proper and thorough cleaning is essential before installing/re-installing an injector nozzle in order to avoid leakage between cylinder head and injector nozzle. The spring-loaded centring cone sleeve ensures accurate guiding of the cleaning tool in the injector nozzle bore, thus enabling both the plane and the conical seal seat to be cleaned properly and without any trouble. The cleaning tool set includes the KL cleaning tool NOK * 16

17 Must-Have Solutions 2015/16 KL Oil Pump with 12 Litre Reservoir Universal field of application. Ideal for use on the gearboxes found in VW-Audi, Ford, BMW, Honda, Nissan, Toyota, Mercedes, Volvo vehicles. The oil pump with 12 litre reservoir facilitates the quick and safe filling/topping up of gear box, differential, engine, power-steering etc. The reservoir can be pressurised quickly and easily with the aid of compressed air. This allows the user to have both hands free to accurately dose the necessary vehicle-specific operating liquid. Alternatively, the filling/ topping up can also be carried out by operating the hand pump on the reservoir. The oil pump with reservoir allows for the quick, easy and professional filling/topping up even in confined space conditions or where access is difficult. Thanks to the universal and the vehicle-specific adaptors included in the kit, the oil pump with reservoir is suitable for a wide range of applications. Accessories: The KL reservoir (12 l) with lid, which is available separately as an accessory, is designed for the quick and safe filling and storage of different types of oil. Additonal reservoir with lid available as accessory (to be ordered separately) NOK * Reservoir capacity (with pump): Maximum pressure: 12 litre 2.5 bar (35 psi) KL Engine Support Device (German Utility Model) Universally suitable device for supporting engines in vehicles. Working on the timing belt side engine mount, for example when changing a timing belt, replacing a water pump etc., is day-to-day work in the garage. Almost every mechanic knows firsthand the problems that can occur when it comes to loosening the side engine mount of transverse-mounted engines. Here, the use of a supporting device, engine crane or engine stand is indispensable. Such devices, however, can make work even more difficult since the engine is no longer properly secured and access will be very limited or sometimes even impossible. KLANN have now solved all these problems with the innovative KL engine support device. The special design of the clamping hook assembly featuring large and individually adjustable clamping hooks with wide supporting surfaces, the unique fastening mechanism enabling the engine support to be fixed to the vehicle frame, and the cleverly designed support plate assembly with its adjustable tilting support pad ensure safe and solid support of the engine. This allows the mechanic to conveniently work on the engine from both the top as well as from the bottom, with the engine always safely supported and secured against the risk of dropping - even when performing tasks such as turning engine shafts, loosening and tightening fastening screws etc. The clamping hooks are 360 rotatable and can be arranged universally to fit almost any vehicle width. Once the device clamping hooks have been correctly positioned on the vehicle frame, these can easily be tightened to securely fix the support assembly to the vehicle. This prevents the engine support device from any slipping or dropping.the ingenious KL engine support device from KLANN offers you a maximum of safety and functionality combined with a wide range of application possibilities - without the need for additional accessories such as vehicle-specific adaptors etc. Max. load capacity: Overall length: Clamping hook width: Clamping hook clamping range: Max. height offset between clamping hooks: Support plate height adjustment: Weight: kg mm 50 mm approx. 70 mm approx. 90 mm 120 mm 16.5 kg NOK * 17

18 KL B Reaction Wrench Set (470 mm long, adjustable) Universally suitable for the perforated timing belt sprockets with a hole-ø not smaller than 6.5 mm as found in: VW-Audi, Seat, Skoda, Alfa, Fiat, Lancia, Dacia, MG, Nissan, Ford, Opel/Vauxhall, Peugeot, Renault, Citroën, Rover, Volvo, Suzuki, Isuzu, Japanese vehicles, etc. Designed to prevent timing belt sprockets on camshafts, injection pumps, etc. from rotating, for example, when loosening/tightening the central fastening bolt. Due to the different interchangeable pins and the adjustable lever allowing for variable adjustments to hole diameters and hole pitches, this tool is almost universal in its range of application NOK * Pitch between pins: Pin-Ø: Pin height: Overall tool length: from 14 mm to 130 mm 6 mm, 7.5 mm, 12 mm, 18 mm 25 mm / 42 mm 470 mm KL Counter-Holding Tool, Crankshaft Suitable for the Ford 2.5 and Volvo 1.6, 1.8, 1.9, 2.0, 2.3, 2.4, 2.5, 2.8 and 2.9 litre 4- and 5-cylinder petrol engines, and the 2.0 and 2.4 litre 5-cylinder Diesel engines. Fitted to: Ford Focus, Galaxy, Kuga, Mondeo, S-MAX and Volvo C30, C70, S40, S60, S70, S80, V40, V50, V70, XC70, XC90. (Engine codes: Ford HUBA, HUWA, HYDA, HYDB, JZDA, LCBD; Volvo B4164S, B4184S, B4194T, B4204S, B4204T, B5204T3, B5204T4, B5204T5, B5234FS, B5234T3, B5234T7, B5234T8, B5234T9, B5244S, B5244S2, B5244S4, B5244S5, B5244S7, B5244SG, B5244SG2, B5244T, B5244T2, B5244T3, B5244T4, B5244T5, B5244T7, B5254FS, B5254T, B5254T10, B5254T11, B5254T2, B5254T3, B5254T4, B5254T5, B5254T6, B5254T7, B5254T8, B6284T/T2, B6294S, B6294S2, B6294T, B6304S3, D5204T, D5204T2, D5204T3, D5204T5, D5244T, D5244T10, D5244T11, D5244T13, D5244T14, D5244T15, D5244T16, D5244T17, D5244T18, D5244T19, D5244T2, D5244T3, D5244T4, D5244T5, D5244T6, D5244T7, D5244T8, D5244T9) This tool is designed to be used for counter-holding the vibration damper while loosening and tightening the crankshaft central screw NOK * KL Universal Mounting Device for Timing Chain Suitable for the Mercedes and Opel/Vauxhall petrol and Diesel engines both with Simplex or Duplex timing chains. The special design of the mounting device prevents skipping a tooth during assembly, thus allowing the mechanic to carry out alone the professional installation of the new timing chain quickly and without any trouble. Risk of dropping the chain or skipping a tooth is eliminated. Substantial time savings, as only one mechanic will be needed to do the job. Even more time savings possible, as on some vehicles removing the radiator, fan clutch etc. is not necessary NOK * 18

19 Must-Have Solutions 2015/16 KL KA SAC Clutch Tool Kit (Patented) Suitable for SAC clutches (6- and 8 bolt holes); e.g. on VW-Audi, BMW, Mercedes, Volvo, Opel/Vauxhall, Renault etc. The clutch tool set KL KA is indispensable for the professional removal and installation of Self-Adjusting Clutches (SAC). Correct removal and installation of clutches is almost impossible without the use of this tool set, as there is always a risk of damaging or distorting the clutch. This will result in incorrect separation or grabbing of the clutch. Distorted or incorrectly mounted clutches are defective and must be replaced. The tool set KL KA prevents damage to the SAC-clutch when removing and installing it. Also, the risk of distorting the adjusting ring in the clutch pressure plate is eliminated by using this tool. The newly developed clutch aligner KL enables the centring of clutch discs also on vehicles that do not feature a pilot bearing in the crankshaft. The two clamping-/centring elements ensure, on the first clamping element (Ø mm) the accurate centring in the clutch disc, and on the second element (Ø mm) the accurate centring in the pilot bearing, respectively the crankshaft bore. Even clutches on engines on which the crankshaft bore-ø is larger than the clutch disc hub-ø can be aligned neatly and accurately thanks to this tool. Enables the clutch pressure plate to be pretensioned during removal and installation (important as a means of avoiding distortion on the clutch). Enables the clutch disc to be centred relative to the pilot bearing or pressure plate. Enables the adjuster ring to be reset in conjunction with reset tool KL NOK * NOK * KL K Terminal Tool Set for Push-On Contacts For releasing terminals from automotive plugs and connectors. The handy and ergonomic design of the blue anodized aluminium handles ensures safe working without the risk of slipping. Due to their very short shape, the terminal tools enable the easy release of cable plug-and-socket connections, even if these are difficult to access. During the release procedure, the barbed hooks are pushed on the terminal by means of the tool forks, so that the cable with the plug can be extracted with ease.thanks to its wide range of different inserts, the terminal tool set KL K enables the trouble-free release of terminal contacts in automotive electrical connectors without the risk of damage or injury. The tool is easy to operate. Substantial time savings. Professional and safe working. KL KA Thread Repair Kit Suitable for glow plug threads M10x1 and M12x1.25 as well as for oil sump plug thread M14x1.5 and M16x1.5; also suitable for injector nozzle fixing screw thread M6. This tool set is indispensable for the quick and easy cleaning or repair of threads on aluminium cylinder heads and aluminium oil sumps. Field of application Aluminium Cylinder Head: Glow plug thread: The dirty thread M10x1 is cleaned and recut by using the thread cleaning tool. The damaged thread is drilled up by means of the special drill. Then, with the aid of the special tap, a new thread with M12x1 or M14x1.25 is cut to retain the threaded inserts with an internal thread of M10x1 or M12x1.25. Injector nozzle fixing screw thread: The M6 threaded inserts are screwed into the injector nozzle fixing screw thread that has been drilled up to M8x1 for the repair. Field of application Aluminium Oil Sump: With the aid of the special tap (M14x1.5 or M16x1.5) the old thread is drilled out and a new thread is being cut at the same time to retain the sump screw plug NOK * 19

20 KLANN, always one solution ahead. Specialist Tools for Vehicle Service and Repair Spezial-Werkzeugbau-GmbH More information?! More information and specialist tools are available at: Partner in the Group KLANN-Spezial-Werkzeugbau-GmbH Breslauer Strasse Donaueschingen Postfach Donaueschingen GERMANY Phone.: +49 (0) 771 / Fax: +49 (0) 771 / info@klann-online.de Internet: Distributed by: Legal Notice Due to continuous improvements and adaptation to state-of-the art technology, we reserve the right to make modifications to our products with regard to design, dimension, weight, features and performances at any time and without prior notice. Thus, the right to adjustments or replacement deliveries of goods already delivered is excluded. Cuts and cancellations can be made by us at any time without the right to legal claim. All indications regarding use and safety are given for information only and without any commitment. In no case do they substitute for legal provisions or the regulations of the Employer s Liability Insurance Association. Errors and omissions excepted. All information and technical data in this document were compiled with the utmost care. However, KLANN assumes no responsibility for possible errors and omissions. Any reproduction, also in extracts, is subject to the prior and written consent of KLANN Spezial-Werkzeugbau-GmbH. All rights reserved. We refer to our General Terms and Conditions of Sale under Legal Notice at Copyright by KLANN-Spezial-Werkzeugbau GmbH Donaueschingen (GERMANY) Printed 05/2015 KLANN-Spezial-Werkzeugbau-GmbH Subject to technical modifications.

Clutch Repairs (465) Copyright GEDORE Automotive GmbH, Germany. formerly

Clutch Repairs (465) Copyright GEDORE Automotive GmbH, Germany. formerly Copyright GEDORE Automotive GmbH, Germany (465) -01 KL-0500-45 KA Clutch Tool Set (SAC), in a Plastic Storage Case (Pat.) Suitable for Self-Adjusting Clutches (with 6 and 8 bolt holes); e.g. on VW-Audi,

More information

Transmission. Transmission (449) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 7.E1

Transmission. Transmission (449) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 7.E1 Transmission Transmission Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 7.E1 (449) 8-01 KL-0140-2 Meter for Coefficient of Friction PM KL-0140-2 For accurate adjustment of bearing pre-load when repairing

More information

Bare må ha det! Tilbud på løsninger

Bare må ha det! Tilbud på løsninger Bare må ha det! Tilbud på løsninger 2013 Bare må ha det! Tilbud på løsninger 1 Always a solution ahead. Special Tools for Vehicle Service and Repair Service Demo Van Experimental Garage For an immediate

More information

Engines. Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 (201) 6-1

Engines. Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 (201) 6-1 Engines Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 (201) 6-1 6-2 (202) Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany - 6.E1 Engines Copyright KLANN-Spezial-Werkzeugbau-GmbH, Germany -

More information

SUSPENSION SUSPENSION P D KEY BELT CHAIN. Wheel Bearing Removal & Installation 6-9

SUSPENSION SUSPENSION P D KEY BELT CHAIN. Wheel Bearing Removal & Installation 6-9 KEY DO NOT USE AIR TOOLS Wheel Bearing Removal & Installation 6-9 P D Coil Spring Compression 10-14 Steering & Suspension 15-16 Bush Removal & Installation 17-22 Ball Joint Removal 23 Hub Pulling 24-27

More information

FAG Wheel Bearing Repair Solution for Light Commercial Vehicles

FAG Wheel Bearing Repair Solution for Light Commercial Vehicles FAG Wheel Bearing Repair Solution for Light Commercial Vehicles Mercedes-Benz Sprinter, Viano, Vito and Volkswagen Crafter Front Axle The content of this brochure shall not be legally binding and is for

More information

1. introduction 3 2. Wheel bearing special features 4 3. Wheel bearing units from an economical point of view 5

1. introduction 3 2. Wheel bearing special features 4 3. Wheel bearing units from an economical point of view 5 Motor chassis Service Technical BROCHuRE Wheel Bearing Repair Solutions for Light Commercial Vehicles CONTENT 1. introduction 3 2. Wheel bearing special features 4 3. Wheel bearing units from an economical

More information

CBA100 / 120 CODES PROGRAMMING AND FUNCTIONALITY

CBA100 / 120 CODES PROGRAMMING AND FUNCTIONALITY ALFA ROMEO 159 Mod. 103 ALFA ROMEO BRERA Mod. 06 103 AUDI A3 Mod. '04-110 AUDI A3 SPORTBACK Mod. '04-110 AUDI A4 Mod. 02 04 146 AUDI A4 Mod. 112 AUDI A4 CABRIO Mod. 05 06 138 AUDI A4 Mod. 08 179 AUDI A5

More information

New HAZET Range of Pullers / Extractors

New HAZET Range of Pullers / Extractors 17 17 New HAZET Range of 2-Arm Pullers 3-Arm Pullers Hydraulic Pullers Ball Bearing Extractors Separators Internal Extractors Forged Quality Practical and Proven Tools New Innovative Range of Pullers For

More information

Brake Service Tools. Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1 5-01

Brake Service Tools. Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1 5-01 -01 KL-0111-1 KL-0111-2 KL-0113-20 K Universal Accessories: KL-0113-2010 KL-0112-0008 KL-0112-0013 KL-0112-3 KL-0111-1 Caliper Pressing Tool with narrow jaws For fully floating caliper with single or double

More information

Auxiliary parts / Miscellaneous

Auxiliary parts / Miscellaneous Auxiliary parts / Miscellaneous Transmission fluid Capacity [Litre] 1 Specification G 009 317 Specification G 052 171 Specification G 052 512 Specification G 052 532 Specification G 052 527 Specification

More information

Hubs & Bearings. Sets for hubs and bearings. Sets for hubs and bearings. Sets for hubs and bearings. Set of 7 spacers for hubs and bearings removal.

Hubs & Bearings. Sets for hubs and bearings. Sets for hubs and bearings. Sets for hubs and bearings. Set of 7 spacers for hubs and bearings removal. Hubs & Bearings Set of 7 spacers for hubs and bearings removal. Renault Peugeot :106, 205 Fiat Alfa Lancia VW: Golf Opel: Corsa, Astra Citroën Ford: Mondeo, Escort, Fiesta Off-Road. Set for hubs and bearings

More information

NEW TO RANGE JUNE 2018

NEW TO RANGE JUNE 2018 JUNE 2018 NK EXPANDS THE RANGE OF SPLASH PANELS WITH 55 NEW REFERENCES We now cover more than 6.000 additional car models. // We expand our range of Splash Panels for Brake Discs with 55 new references.

More information

Engine Tools Cooling System

Engine Tools Cooling System KL-0124-0 Pump directly on Pump indirectly on KL-0124-0 Pressure Tester The Pressure Tester KL-0124-0 is made from metal. It consists of a quick clutch, a pressure relief valve and a flexible tube. This

More information

New Product Guide. See the new Sykes-Pickavant catalogue for further details! Service & Diagnostics. Engine CAT054

New Product Guide. See the new Sykes-Pickavant catalogue for further details! Service & Diagnostics. Engine CAT054 Product Catalogue See the new Sykes-Pickavant catalogue for further details! CAT054 New Product Guide Engine 314050 Petrol Compression Tester Set - for Deep Seated Plug Ports Page 11 314270 Page 13 314295

More information

*

* M210-0043 Rubber Mount Kit M140-1143 Rubber Mount Kit For R&R of the rear rubber hydraulic mount in the Lower For removing or installing the rear Control arm on Mercedes W210 rubber hydraulic mount in

More information

SPECIAL TOOLS FOR AUTO REPAIRS

SPECIAL TOOLS FOR AUTO REPAIRS Ver: 7 SPECIAL TOOLS FOR AUTO REPAIRS INVEST IN TIME Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers,

More information

ENGINE - GLOW PLUGS. Innovation is our mission!

ENGINE - GLOW PLUGS. Innovation is our mission! ENGINE - GLOW PLUGS Innovation is our mission! 1 PAGE 2 3 GLOW PLUG CONNECTOR PLIERS 268 4 5 STANDARD NUT SOCKETS FOR GLOW PLUGS 268-269 6 7 GLOW PLUG SCREWING AID 269 8 TORQUE TOOLS 270 RATCHET RING SPANNER

More information

RESISTANCES PRODUCTS. Electro-Mechanical Parts. page 1 / 29

RESISTANCES PRODUCTS. Electro-Mechanical Parts. page 1 / 29 PRODUCTS Parts page 1 / 29 35.10001 35.10002 Description: Standard Impedance R1 (Ohm): 6 Standard equipment: With Dissipator Description: Standard Voltage Drop 24V>12V Impedance R1 (Ohm): 3 35.10003 35.10004

More information

BRAKES BRAKE PIPE TOOLS CHASSIS. Flaremaster 2 Flaring Tools

BRAKES BRAKE PIPE TOOLS CHASSIS. Flaremaster 2 Flaring Tools BRAKES BRAKE PIPE TOOLS Flaremaster 2 Flaring Tools Convenient and easy to use hand-held flaring tools Unique, original patented design for producing high quality pipe flares on the vehicle Flaring pipes

More information

PULLERS GD_PG_$KT-K10-$KP-ABZI-$PG-UMABZ :31:24

PULLERS GD_PG_$KT-K10-$KP-ABZI-$PG-UMABZ :31:24 PULLERS INTERNAL EXTRACTORS Precision internal extractor Slide hammer Suitable for small ball bearings Ideal for limited access areas Centering shaft For the accurate fitting of bearings and bushes 660.0501

More information

Snap-on Tools Center Hans de Jong /

Snap-on Tools Center Hans de Jong / Snap-on Tools Center Hans de Jong 0-79 88 7 / www.snap-ondealer.nl Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their

More information

Contents c mm Ø Cerametallic & Organic Drive Plate Hub Spline Details H e l i x

Contents c mm Ø Cerametallic & Organic Drive Plate Hub Spline Details H e l i x Contents Part Number Legend... 2 The HELIX Racing Clutch Range... 4 Clutch Terminology... 5 Clutch Fitting & Flywheels... 6 Release Bearings... 7 Concentric Slave Cylinder Release Bearings... 8 Clutch

More information

AXLE. Innovation is our mission!

AXLE. Innovation is our mission! AXLE Innovation is our mission! 1 PAGE WHEEL BEARING SYSTEM PP I 518 HYDRAULIC SYSTEM PP II 518-520 ADAPTER 520 UNIVERSAL SPINDLE DRIVE 520 WHEEL BEARING ASSEMBLY SYSTEM PP II 521 WHEEL HUB DISASSEMBLY

More information

WELZH. VALID TO 31ST AUGUST WERKZEUG

WELZH. VALID TO 31ST AUGUST WERKZEUG WELZH. VALID TO 31ST AUGUST WERKZEUG 1 Hub Mate Supporting Adaptor 3200-ww 80.00 RRP Must have item for any garage! Designed for supporting Control Arms. The HUB MATE SUPPORTING ADAPTOR is used in conjunction

More information

CAN Interface Application List V1.3

CAN Interface Application List V1.3 Alfa 147, 156,166 Aston Martin V8 Vantage Audi A3 2002 + Audi A4 2001+ Audi A5 V0.3 Audi A6 2001+ Audi A8 2002 + Audi TT 2002 + BMW 1 Series BMW 3 Series 2002+ BMW 3 Series BMW 5 Series 2001+ BMW 5 Series

More information

VDO Autodiagnos Check

VDO Autodiagnos Check www.autodiagnos.com VDO Autodiagnos Check December 2018 - Software version 01.08 VDO are pleased to announce the release of the latest software for your VDO Autodiagnos Check service tool. The new software

More information

JTC-1115 BMW BUSH REMOVER / INSTALLER

JTC-1115 BMW BUSH REMOVER / INSTALLER JTC-1011 CRANKSHAFT PULLY HOLDER JTC-1115 BMW BUSH REMOVER / INSTALLER JTC-1123 IGNITION LOCK REMOVER For removal and replacement of the crankshaft bolt, M112 and M113, as found on E320, E430, etc. Applicable:

More information

NK EXPANDS THE RANGE OF COIL SPRINGS

NK EXPANDS THE RANGE OF COIL SPRINGS #9-2018 NK EXPANDS THE RANGE OF COIL SPRINGS We expand the range with 95 part numbers // Made of high quality spring steel // The extension includes coil springs for a number of popular, newer car models

More information

TOOLS TO FIRE YOUR EMOTION! V4951 Ratcheting open-end wrench set. V Socket set. Closed solid steel ratchet V4944

TOOLS TO FIRE YOUR EMOTION! V4951 Ratcheting open-end wrench set. V Socket set. Closed solid steel ratchet V4944 TOOLS TO FIRE YOUR EMOTION! 2017-05-01 2017-08-1 V4951 Ratcheting open-end wrench set Hot Innovation! Closed solid steel ratchet V241 7 8 Socket set Hot Price! V4944 V494 HOT17-1/EN/NO/9 7 Valid until:

More information

wiper blades wiper blades APPLICATION GUIDE

wiper blades wiper blades APPLICATION GUIDE wiper blades APPLICATION GUIDE Universal Adaptor enclosed Changing your wiper blades has never been easier with the Bluecol Traditional wiper blade system. This range of blades can be used as a direct

More information

Ver: 2 SPECIAL TOOLS FOR AUTO REPAIRS

Ver: 2 SPECIAL TOOLS FOR AUTO REPAIRS Ver: 2 SPECIAL TOOLS FOR AUTO REPAIRS Company profile: Wallmek i Kungälv AB was started in 1978, producing and designing special tools for car repairs. Wallmek stands for idea and design of tools, up to

More information

Nozzles and spares for PIEZO COMMON RAIL INJECTORS AND PUMPS suitable for Continental system (ex Siemens VDO )

Nozzles and spares for PIEZO COMMON RAIL INJECTORS AND PUMPS suitable for Continental system (ex Siemens VDO ) PRODUCT UPDATE August 2010 (last update 07.12.2018) Nozzles and spares for PIEZO COMMON RAIL INJECTORS AND PUMPS suitable for Continental system (ex Siemens VDO ) The worldwide first high-pressure diesel

More information

Tips & Technology For Bosch Partners

Tips & Technology For Bosch Partners Tips & Technology For Bosch Partners Current topics for successful workshops No. 15/2010 Braking technology Invented for Life Coated brake disks Quality first When full braking from a speed of 80 mph,

More information

Tools for Changing Springs and Shock Absorbers

Tools for Changing Springs and Shock Absorbers Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E -0 The KLANN Spring Compressors!!!!! The new Stationary Spring Compressor KL-550 (see page -03 - -05) Variably adjustable. No additional tool required. Universally

More information

INSTRUCTIONS FOR: COIL SPRING COMPRESSOR

INSTRUCTIONS FOR: COIL SPRING COMPRESSOR INSTRUCTIONS FOR: COIL SPRING COMPRESSOR Model no: RE228 INSTRUCTIONS FOR COIL Spring Compressor Model No: RE228 Thank you for purchasing a Sealey Product. Manufactured to a high standard this product

More information

1 JULY ~ 30 AUGUST 2013 Micro - Tec

1 JULY ~ 30 AUGUST 2013 Micro - Tec *All Prices Excl VAT* WINTER SPECIALS E&OE 1 JULY ~ 30 AUGUST 2013 KI-1312 R1 277.00 Sq. Dr Heavy Duty Composite Mini * Impact Wrench *Handle Exhaust with Muffler Sq. Dr: : 11000RPM : Max Torque: 60 NM

More information

Engine Tools Fuel System

Engine Tools Fuel System Fuel System KL-0124-4 KL-0124-4 Pressure- and Vacuum-Pump With plastic storage case for checking of pressure and vacuum lines. Recommended from following manufacturers: VW-Audi, Porsche, Chrysler, Daihatsu,

More information

Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors Automotive Pullers Spare Parts & Kit Contents PULLING & EXTRACTING

Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors Automotive Pullers Spare Parts & Kit Contents PULLING & EXTRACTING Mechanical Pullers Bearing Separators Hydraulic Pullers Split Collet Extractors utomotive Pullers & PULLING & EXTRCTING 337 PULLING & EXTRCTING Toledo Pullers comprehensive range including Mechanical,

More information

STEERING AND SUSPENSION section 2

STEERING AND SUSPENSION section 2 STEERING AND SUSPENSION section TRRT-PC piece Track Rod Removal Tool Kit Quality, kit designed for easy removal and installation of ball joints on track rods. Knurled handle provides extra grip and three

More information

Timing Belt Manual. From professionals for professionals

Timing Belt Manual. From professionals for professionals Timing Belt Manual From professionals for professionals 2 Test the TecDoc Catalogue online! Table of Contents 4 About TecAlliance 5 Introduction 6 ALFA ROMEO Giulia (952_), 2.2 JTD, 132 kw 15 AUDI A4 (8K2,

More information

The vehicle type is not recorded as a searchable field in the PentiP system; therefore we are unable to report specifically on HGVs and LGVs.

The vehicle type is not recorded as a searchable field in the PentiP system; therefore we are unable to report specifically on HGVs and LGVs. Uned Rhyddid Gwybodaeth / Freedom of Information Unit Response Date: 04/01/2019 2018/1165 - Speeding Lorries along the A55 In response to your recent request for information regarding; I would like to

More information

Self-Adjusting Clutch (SAC) Technology Special tools / User instructions

Self-Adjusting Clutch (SAC) Technology Special tools / User instructions Self-Adjusting Clutch (SAC) Technology Special tools / User instructions The content of this brochure shall not be legally binding and is for information purposes only. To the extent legally permissible,

More information

Indicators and other information

Indicators and other information 1 Alfa Romeo 159 (2006-) s D12356rwkvh* 2 Alfa Romeo Brera (2005-2010) s D12356rwkvh* 3 Alfa Romeo Giulietta (2010-) s D12356rwkvh 4 Alfa Romeo MiTo (2008-) s D12356rwkvh 5 Audi A1 (2010-) s krhgvepbj

More information

Paser - Maestro 3.0 Blue Lista compatibilità

Paser - Maestro 3.0 Blue Lista compatibilità CAR MODEL YEAR Comandi Positivo Tasto al sottochiave Telefono volante Antenna Radio Note Plug&Play Alfa Romeo 147 2003-2010 O X O ISO All Models X 156 2003-2005 O X O ISO All Models X 159 2005-2011 O O

More information

GENERAL TOOLS. Strong head design for professional use. Chrome molydbenum steel. Strong head design for professional use. Chrome molydbenum steel.

GENERAL TOOLS. Strong head design for professional use. Chrome molydbenum steel. Strong head design for professional use. Chrome molydbenum steel. OT-135 1/2" DR. x 30" HEAVY DUTY BREAKER BAR Strong head design for professional use. Chrome molydbenum steel. OT-135A 1/2" DR. x 18" HEAVY DUTY BREAKER BAR Strong head design for professional use. Chrome

More information

MODEL INFORMATION NEWS September 2008

MODEL INFORMATION NEWS September 2008 MODEL INFORMATION NEWS September 2008 CARS Light Commercial Vehicles ALFA ROMEO Alfa Mito Hatchback Model 2008 AUDI Audi A3 3 door Hatchback Facelift Model 2008 Audi A3 Sportsback Station wagon Facelift

More information

Repair kits. MAKE IT EASY. MAKE IT

Repair kits. MAKE IT EASY. MAKE IT 2012 2011 2012 MOOG is a trademark of the Federal-Mogul Corporation PRMMO1125-EN Repair kits Federal-Mogul Global Aftermarket EMEA bvba Kontichsesteenweg 67/1 2630 Aartselaar Belgium www.federalmogul.com

More information

OBDsaver Vehicle Compatibility List updated 22nd January 2019

OBDsaver Vehicle Compatibility List updated 22nd January 2019 All vehicle manufactures Model Part no. Any vehicle With OBDII port OBDUVB Any vehicle With OBDII port OBDUVP AUDI A1 8X 2010-2018 OBD100A A3 8P 2003-2013 OBD100A 8V 2012-2018 OBD100A A4 B6 2000-2004 OBD100A

More information

NEW PC REGISTRATIONS BY SEGMENT ΤΑΞΙΝΟΜΗΣΕΙΣ ΕΠΙΒΑΤΙΚΩΝ ΚΑΤΑ ΚΑΤΗΓΟΡΙΑ

NEW PC REGISTRATIONS BY SEGMENT ΤΑΞΙΝΟΜΗΣΕΙΣ ΕΠΙΒΑΤΙΚΩΝ ΚΑΤΑ ΚΑΤΗΓΟΡΙΑ DUAL PURPOSE YTD 7.921 11,3 869 14,6 BMW X1-SERIES 1.045 13,19 87 10,0 VOLKSWAGEN TIGUAN 823 10,39 83 9,6 FORD KUGA 788 9,95 109 12,5 SUZUKI VITARA 784 9,90 95 10,9 JEEP RENEGADE 629 7,94 60 6,9 AUDI Q2

More information

BERU extends its Ceramic Glow Plug range. BERU Ceramic Glow Plugs for VW, Opel, Renault-Nissan now also available in our range for the aftermarket.

BERU extends its Ceramic Glow Plug range. BERU Ceramic Glow Plugs for VW, Opel, Renault-Nissan now also available in our range for the aftermarket. Ignition Technology Diesel Cold-Start Technology Cooling Sensors BERU OE NEWSLETTER #6 CERAMIC GLOW PLUGS 1 BERU NEWSLETTER #6 CERAMIC GLOW PLUGS BERU extends its Ceramic Glow Plug range BERU Ceramic Glow

More information

Taking aim at the future. Maintenance of vehicle-specific systems. Common Rail Diesel Systems replacement parts and repairs.

Taking aim at the future. Maintenance of vehicle-specific systems. Common Rail Diesel Systems replacement parts and repairs. www.vdo.com Taking aim at the future. Maintenance of vehicle-specific systems. Common Rail Diesel Systems replacement parts and repairs. Shape your future business today. Shape your future business today.

More information

CSC-Tool Frontcamera Vehiclecoverage Version 50

CSC-Tool Frontcamera Vehiclecoverage Version 50 Document Version 4.0 Glossar: calibration required: # 1 change windscreen # 2 faultcode Sep 16 # 3 change ecu # 4 change camera # 5 level sensor replacement # 6 chassis structurally / adjusted vehicle

More information

Body and Interior Tools

Body and Interior Tools 9-01 KL-0145-90 KL-0145-90 Hydraulic Alignment Set 10 t. The Hydraulic Press Set KL-0145-90 allows Pressing and Spreading functions. Contents: Contents 3 4 1 2 5 6 8 Part No. Description Qty. 1 Hydraulic

More information

GENERAL MOTORS , , ERA S.r.l. Moncalieri (TO) Italy - tel: fax:

GENERAL MOTORS , , ERA S.r.l. Moncalieri (TO) Italy - tel: fax: 662555 SWITCH, WINDOW WINDER FORD 1126926, YS4T 14529 AA FORD FOCUS GENERAL MOTORS 25 184 080, 25 195 786, 96 276 354 CHEVROLET LACETTI, NUBIRA, REZZO DAEWOO REZZO Fitting Position: Left Front, Number

More information

Information Circular num. 40

Information Circular num. 40 OFFICIAL DISTRIBUTOR: Information Circular num. 40 NEW REFERENCES AVAILABLES IN STOCK MANIFOLD ABSOLUTE PRESSURE (MAP) SENSORS These sensors detect the pressure of the inhalation collector inhaled air.

More information

Instructions for: Diesel Engine Setting/Locking Tool Kit Renault dci Engines. Model No: VS4760.V3 1. SAFETY INSTRUCTIONS

Instructions for: Diesel Engine Setting/Locking Tool Kit Renault dci Engines. Model No: VS4760.V3 1. SAFETY INSTRUCTIONS Instructions for: Diesel Engine Setting/Locking Tool Kit Renault dci Engines Model No: VS4760.V3 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according

More information

Car Body and Interior (491) Copyright GEDORE Automotive GmbH, Germany. formerly

Car Body and Interior (491) Copyright GEDORE Automotive GmbH, Germany. formerly Copyright GEDORE Automotive GmbH, Germany (41) -01 KL-018-0 KB KL-018-0 KB Wiper Arm Puller Set Suitable, e.g., for VW-Audi, BMW, Citroën Ford, Mercedes, Opel/Vauxhall, Peugeot, Renault etc. An indispensable

More information

TomTom ecoplus vehicle support matrix Firmware version: Date : 04/12/2015

TomTom ecoplus vehicle support matrix Firmware version: Date : 04/12/2015 TomTom ecoplus vehicle support matrix Firmware version: 3.1.76 Date : 04/12/2015 This list shows all known vehicle models that have been equipped with TomTom ecoplus so far. Vehicle models not fully supported

More information

2018(181) Bmw 2 Series. 2017(171) Ford Ecosport. 2014(141) Ford Focus. 2015(151) Ford Focus. 2015(151) Ford Focus. 2016(162) Ford Kuga

2018(181) Bmw 2 Series. 2017(171) Ford Ecosport. 2014(141) Ford Focus. 2015(151) Ford Focus. 2015(151) Ford Focus. 2016(162) Ford Kuga Kevin Egan Cars, Carraroe, Sligo P: 071 915 44 42 F: 071 91 54 443 www.kevinegancars.ie 2015(152) Audi A6 Price: 26450 2017(172) Bmw 5 Series Price: 40950 2014(141) Fiat Scudo Price: 10250 Price: 14450

More information

Distributor Update Date: 02 October 2013 Topic: New Product/Listings. ETA: 15-Oct-2013 OEM Reference: Barcode:

Distributor Update Date: 02 October 2013 Topic: New Product/Listings. ETA: 15-Oct-2013 OEM Reference: Barcode: Distributor Update Date: 02 October 2013 Topic: New Product/Listings New Products Base Part # DBA2035 ETA: 15-Oct-2013 OEM Reference: 93184247 Barcode: 9316391358219 Solid 278 42.2 10 8 65 5 HOLDEN ASTRA

More information

Body and Interior Tools

Body and Interior Tools -01 KL-0145-0 KL-0145-0 Hydraulic Alignment Set 10 t. The Hydraulic Press Set KL-0145-0 allows Pressing and Spreading functions. Contents: Specification: 3 4 1 2 5 6 7 8 Part No. Description Qty. 1 Hydraulic

More information

MARWAL TTP 467 SAAB , , , , , , , * WALBRO AOS 006

MARWAL TTP 467 SAAB , , , , , , , * WALBRO AOS 006 662555 SWITCH, WINDOW WINDER FORD 1126926, YS4T 14529 AA FORD FOCUS BOSCH 0 986 580 825 1 684 703 59 4*, 1 684 704 09 4*, 1 684 704 29 4*, 1 684 704 69 4*, A 1 684 703 59 4*, A 1 684 704 09 4*, A 1 684

More information

ALL NEW TECNA FULLY AUTOMATIC SPOT WELDER FEATURING SMART PLUS

ALL NEW TECNA FULLY AUTOMATIC SPOT WELDER FEATURING SMART PLUS Search this website HOME PRODUCTS! COMPANY PROFILE TECNA SUPPORT CONTACT ALL NEW TECNA 19000 FULLY AUTOMATIC SPOT WELDER FEATURING SMART PLUS TECNA s latest 19000 Automatic Spot Welder with SMART PLUS

More information

Tek ref Description OEM NO Notes B-354 TRACK CONTROL ARM LOWER RH

Tek ref Description OEM NO Notes B-354 TRACK CONTROL ARM LOWER RH 1 BMW 1 SERIES ( F20, F21 ) 2011 - B-354 TRACK CONTROL ARM LOWER RH 31126852992 2 BMW 1 SERIES ( F20, F21 ) 10/2011 - B-355 TRACK CONTROL ARM LOWER LH 31126852991 3 BMW 1 SERIES ( F20, F21 ) 2011- B-358

More information

NEWTORANGE. BG Automotive Engineered in the UK BULLETIN 12/16 19 NEW PART NUMBERS NOW AVAILABLE! BG Automotive Engineered in the UK 6 NEW 2 NEW

NEWTORANGE. BG Automotive Engineered in the UK BULLETIN 12/16 19 NEW PART NUMBERS NOW AVAILABLE! BG Automotive Engineered in the UK 6 NEW 2 NEW 6 NEW 2 NEW STAR PRODUCT TIMING CHAIN KIT - PAGE 2 COOLING PRODUCTS PAGE 3-4 CRANKSHAFT PULLEYS PAGE 5 8 NEW 3 NEW SEALING PRODUCTS PAGE 6-7 TIMING PRODUCTS PAGE 8 19 NEW PART NUMBERS NOW AVAILABLE! 1

More information

- Pullers - Puller Units - Hydraulic Puller Sets - Track Alignment Gauges - Towing Rods

- Pullers - Puller Units - Hydraulic Puller Sets - Track Alignment Gauges - Towing Rods - Pullers - Puller Units - Hydraulic Puller Sets - Track Alignment Gauges - Towing Rods Use Areas: Automotive Maintenance Electrical Industries Mecanical Engineering Industry Motorbike Garage Automobile

More information

KD Assembly/disassembly recommendations

KD Assembly/disassembly recommendations KD457.37/UK/01-06/2014 KD457.37 Assembly/disassembly recommendations AUDI: A3 Series 1 (AU34) SEAT: Cordoba III, Ibiza II, Inca, Leon, Toledo Series 2 SKODA: Octavia II, Octavia III VOLKSWAGEN: Bora, Caddy

More information

ELECTRO-MECHANICAL PARTS

ELECTRO-MECHANICAL PARTS PRODUCTS Parts page 1 / 46 Parts - Temperature Sensors 29.40031 Parts - Temperature Sensors 29.40032 Description: Fiat Tipo - Tempra Description: Alfa Romeo 164 NOTE: In car temperature - Blue NOTE: In

More information

NEWTORANGE BULLETIN 07/18 32 NEW PART NUMBERS NOW AVAILABLE! Engineered in the UK. BG Automotive Engineered in the UK

NEWTORANGE BULLETIN 07/18 32 NEW PART NUMBERS NOW AVAILABLE! Engineered in the UK. BG Automotive Engineered in the UK 4 NEW 2 NEW STAR PRODUCT TIMING CHAIN KIT - PAGE 2 CRANKSHAFT PULLEYS PAGE 3 OIL PUMPS PAGE 4 9 NEW 5 NEW 12 NEW POWER STEERING PUMPS PAGE 5-7 SEALING PRODUCTS PAGE 8-9 TIMING PRODUCTS PAGE 10-12 CS9901SFK

More information

UNDERCAR TOOLS. OT-103 MACPHERSON STRUT SPRING COMPRESSOR OT-104 DROP FORGED COIL SPRING COMPRESSOR (5/8"-11 UNC CNAINE)

UNDERCAR TOOLS.   OT-103 MACPHERSON STRUT SPRING COMPRESSOR OT-104 DROP FORGED COIL SPRING COMPRESSOR (5/8-11 UNC CNAINE) OT-103 MACPHERSON STRUT SPRING COMPRESSOR A specialty tool for use on all vehicles equipped with. Macpherson syruts to rapidly compress the oil spring. To enable replacement of shock absorbers, spring

More information

MOL DYNAMIC PREMIUM ENGINE OILS DUAL FILM TECHNOLOGY FOR MAXIMUM PERFORMANCE

MOL DYNAMIC PREMIUM ENGINE OILS DUAL FILM TECHNOLOGY FOR MAXIMUM PERFORMANCE PREMIUM ENGINE OILS DUAL FILM TECHNOLOGY FOR MAXIMUM PERFORMANCE DUAL PROTECTION LAYERS UNDER EXTREME LOADS FLUID FILM AT NORMAL LOAD DYNAMIC DUAL EFFECT FILM (DDF) TECHNOLOGY MAXIMUM PERFORMANCE AND PROTECTION

More information

Max Speed Location Offence Date Vehicle Make & Model

Max Speed Location Offence Date Vehicle Make & Model Max Speed Location Offence Date Vehicle Make & Model 102 M40 JUNCTION 16-15 01/04/2014 BMW 1 SERIES 102 M50 E/B JCT 3-2 04/04/2014 MERCEDES VITO VAN 110 A5 W/B 05/04/2014 YAMAHA R1 101 M6 TOLL, T6, 44/7

More information

Asteroid (June 2014)

Asteroid (June 2014) 25-400 Asteroid (June 2014) SW Services SW Positive Illumination Speedpulse Reverse Negative Phone Parrot CAR MODEL YEAR Notes Type Type Commands Ignition Signal Signal Gear Handbrake Button Mode Alfa

More information

ZE ZE ZE. Simplex expanding wedge brake Assembly and Maintenance Instructions

ZE ZE ZE. Simplex expanding wedge brake Assembly and Maintenance Instructions Simplex expanding wedge brake Assembly and Maintenance Instructions Simplex expanding wedge brake Assembly and Maintenance Instructions Edition 1 This publication is not subject to any update service.

More information

LHD Tailored Car Mats Vehicle Database Version 3 Date 01/12/2016

LHD Tailored Car Mats Vehicle Database Version 3 Date 01/12/2016 LHD Tailored Car Mats Vehicle Database Version 3 Date 01/12/2016 No Of Mats In Make Model Type Year From Year To A Set Alfa Romeo 147 (TYP 937) 2001 2010 4 Alfa Romeo 159 2005 2011 4 Audi A1 (PQ25) 2010

More information

The dry double clutch

The dry double clutch The dry double clutch Special tools Audi, SEAT, ŠKODA, Volkswagen, 0AM -speed transmission Renault, DC 6-speed transmission Ford, DPS6 6-speed transmission The content of this brochure is not legally binding

More information

Automotive tools catalogue

Automotive tools catalogue Automotive tools catalogue TAIWAN FOREMOST HARDWARE INDUSTRIAL CO. LTD. 2014 ~ 2015 Taiwan Auto Tools focuses professionally on the field of auto service repair and hand tools. With the support from our

More information

Pipe Flaring Tools Pipe & Brake Service Tools Caliper Tools Bleeding & Fluid Testing FOR USE WITH PETROL ENGINES

Pipe Flaring Tools Pipe & Brake Service Tools Caliper Tools Bleeding & Fluid Testing FOR USE WITH PETROL ENGINES KEY DO NOT USE AIR TOOLS P D Pipe Flaring Tools 32-35 Pipe & Brake Service Tools 36-37 Caliper Tools 38-39 Bleeding & Fluid Testing 40-42 FOR USE WITH PETROL ENGINES FOR USE WITH DIESEL ENGINES BELT CHAIN

More information

SCdefault. 900 Installation instructions

SCdefault. 900 Installation instructions SCdefault 900 Installation instructions SITdefault Sports chassis MONTERINGSANVISNING INSTALLATION INSTRUCTIONS MONTAGEANLEITUNG INSTRUCTIONS DE MONTAGE Accessories Part No. Group Date Instruction Part

More information

TF-60SN, Audi/VW 09G, 09K, 09M, BMW Mini 6 Speed FWD & AWD

TF-60SN, Audi/VW 09G, 09K, 09M, BMW Mini 6 Speed FWD & AWD 92 93 OVERHAUL KITS Overhaul with Bonded Pistons 09G, TF-60SN, Mini GA6F21WA... 03-ON 1 101000K Overhaul without Bonded Pistons 09G, TF-60SN, Mini GA6F21WA... 03-ON 1 101001K Overhaul with Bonded Pistons

More information

Maintenance and lubrication products

Maintenance and lubrication products Maintenance and lubrication products Mechanical tools... 1070 Hook and impact spanners... 1070 Lock nut spanners and axial lock nut sockets... 1070 Bearing fitting tools... 1070 Jaw pullers... 1071 Strong

More information

Technical Information

Technical Information Technical Information TI No. WL 80-48 E April 1999 Rolling Bearings FAG Mechanical Extractors Small rolling bearings with bore diameters of up to about 100 mm which have an interference fit on the shaft

More information

Pullers, Reversible Twin Leg. Pullers, Reversible Triple Leg. Pullers. Internal / External Puller, 2-arm + 3-arm use

Pullers, Reversible Twin Leg. Pullers, Reversible Triple Leg. Pullers. Internal / External Puller, 2-arm + 3-arm use Pullers, Reversible Twin Leg - forged - chrome plated 7713 Puller, Reversible Twin Leg, 75 mm 7714 Puller, Reversible Twin Leg, 100 mm 7716 Puller, Reversible Twin Leg, 150 mm 7718 Puller, Reversible Twin

More information

Mounting plates with predrilled holes for mounting angles Mounting kits Slider... Slider SK-V 20...

Mounting plates with predrilled holes for mounting angles Mounting kits Slider... Slider SK-V 20... Table of contents Product catalogue 2005... 1 Georg Fischer Transportation Engineering... 4 Fifth wheels... 5 Fifth wheels... 6 20t imposed load... 7 SK-S 36.20 PLUS (standard)... 7 Spare parts SK-S 36.20

More information

INSTALLATION INSTRUCTION 88088

INSTALLATION INSTRUCTION 88088 INSTALLATION INSTRUCTION 88088 For Rancho Suspension Systems RS6588 & RS6589: FORD F-150 READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev B IMPORTANT NOTES! WARNING:

More information

JTC-1115 BMW BUSH REMOVER / INSTALLER

JTC-1115 BMW BUSH REMOVER / INSTALLER JTC-1011 CRANKSHAFT PULLY HOLDER For removal and replacement of the crankshaft bolt, M112 and M113, as found on E320, E430, etc. Applicable: BENZ M112, M113, M137, M155, M156, M275, and M288. JTC-1115

More information

Sensori assistenza parcheggio Park assist sensors

Sensori assistenza parcheggio Park assist sensors Sensori assistenza parcheggio Ottobre 2017 / October 2017 566000 BOSCH 0 263 023 939 MAYBACH 0045428718 001 542 74 18, 003 542 87 18, 004 542 87 18, A 001 542 74 18, A 003 542 87 18, A 004 542 87 18 MAYBACH

More information

PULLERS & SEPARATORS

PULLERS & SEPARATORS Workshop Solutions PULLERS & SEPARATORS INTRODUCTION Sykes-Pickavant has been at the forefront of providing specialist Workshop Solutions for Industry, for more than 75 years, and this latest catalogue

More information

PIERBURG. more technical details: PIERBURG No. - Ref-No. - PIERBURG No. - Ref-No

PIERBURG. more technical details:  PIERBURG No. - Ref-No. - PIERBURG No. - Ref-No 7.00773.13.0 7.01713.27.0 059 121 012A 4028977739156 4028977739699 7.01219.17.0 948 110 050 03 948 110 050 04 948 110 050 05 948 110 050 06 4028977738845 SRM - suction pipe module Q7 4.2 FSI 32V 257 kw

More information

TECHNICAL BULLETIN S /00. S-TYPE Essential Tools Specifications SERVICE DATE 2000 MY-ON S-TYPE MODEL VIN L00001-ON

TECHNICAL BULLETIN S /00. S-TYPE Essential Tools Specifications SERVICE DATE 2000 MY-ON S-TYPE MODEL VIN L00001-ON SERVICE DATE 03/00 TECHNICAL BULLETIN S-TYPE Essential Tools Specifications MODEL VIN S100-01 2000 MY-ON S-TYPE L00001-ON Issue: The Service Tools required for the S-TYPE Sedan are listed below, which

More information

VAG Service Light Reset & EPB (Electronic Park Brake) Tool

VAG Service Light Reset & EPB (Electronic Park Brake) Tool VAG Service Light Reset & EPB (Electronic Park Brake) Tool - Handheld, user friendly, simple and easy to use - Rubber Over-Boot Protection Moulding - Compatible with latest CAN vehicles - Resets Service

More information

KD Disassembly/ Assembly recommendations

KD Disassembly/ Assembly recommendations KD457.48 Disassembly/ Assembly recommendations AUDI: SKODA: VOLKSWAGEN: KD457.48/UK/01-05/2016 A4 (Series 2, 2 FL, Cabriolet), A6 (Series 2, 2FL, Allroad), A8 Superb Passat ENGINES 2.5TDi TIMING BELT DIAGRAM

More information

PROFILE FOR AUTOMOBILE LIFTERS

PROFILE FOR AUTOMOBILE LIFTERS CONSULTANTS ENGINEERS TRADERS FIRST TIME IN PAKISTAN Work With Water & Air Pressure PROFILE FOR AUTOMOBILE LIFTERS INTRODUCTION OF OUR COMPANY Now IPEX INDUSTRIAL PROJECTS EXPORT (PVT) LTD wanted to serve

More information

Acquisition of Derwent Management Services New SMR Data

Acquisition of Derwent Management Services New SMR Data Acquisition of Derwent Management Services New SMR Data Subscribers may have seen the news of our recent acquisition of Derwent Management Services: June 2014 http://www.fleetnews.co.uk/news/2014/2/19/cap-automotive-acquires-derwent-management-services/49650/

More information

WHAT S NEW. Totals. The Stats - 2,403 NEW VEHICLES! - 71,205 VEHICLES! - 40,667 NEW SYSTEMS! - 528,054 SYSTEMS! - 12,746 NEW CODES!

WHAT S NEW. Totals. The Stats - 2,403 NEW VEHICLES! - 71,205 VEHICLES! - 40,667 NEW SYSTEMS! - 528,054 SYSTEMS! - 12,746 NEW CODES! WHAT S The Stats - 2,403 VEHICLES! - 40,667 SYSTEMS! - 12,746 CODES! - 1,753 FUNCTIONAL TESTS! Totals - 71,205 VEHICLES! - 528,054 SYSTEMS! - 596,201 CODES! - 32,789 FUNCTIONAL TESTS! MORE TO AUTO ID/CLEAR

More information

How it s done Fitting instructions for replacing brakes

How it s done Fitting instructions for replacing brakes How it s done Fitting instructions for replacing brakes Fitting instructions for replacing brakes We invest a lot in developing our products. We complete up to 300,000 test kilometres and 1,000 hours of

More information

Product Part No. OE Reference. BRERA (939_), SPIDER (939_), 159 Sportwagon (939_), 159 (939_)

Product Part No. OE Reference. BRERA (939_), SPIDER (939_), 159 Sportwagon (939_), 159 (939_) Page 1 of 10 PIERBURG more technical details: http://onlineshop.ms-motorservice.com ALFA ROMEO 7.07759.32.0 air supply LMS BRERA (939_), SPIDER (939_), 159 Sportwagon (939_), 159 (939_) 55187722 4028977881596

More information

BMW7246 Puller / BMW7246-2 Installer For R&R the Thrust Arm (bracket) from/to the Front Control Arm on BMW E30, E36, Z3, E46. Thrust arm bushing# 31129063163 BMW334-190 Rear Wheel Carrier Kit For R&R ball

More information

CARS 2010 Release 2 News

CARS 2010 Release 2 News CARS 2010 Release 2 News ISS (Intelligent System Scan) There is a completely new system scan function, ISS (Intelligent System Scan) introduced in 2010 Release 2. The function scans through all the vehicle

More information