StealthMod. SMS-T-TACDC12 SKU# & Up Toyota Tacoma Double Cab. INSTALLATION GUIDE for the
|
|
- Stephany Clarke
- 5 years ago
- Views:
Transcription
1 StealthMod INSTALLATION GUIDE for the SMS-T-TACDC12 SKU# & Up Toyota Tacoma Double Cab If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly presents two problems: 1) The sub-bass performance will suffer due to the movement of the enclosure caused by the force exerted by the woofer(s). 2) A loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration. INSTALLATION DIFFICULTY: 3OUT OF 5 ESTIMATED TIME: 3-4 HOURS STEALTHBOX SPECIFICATIONS Enclosure Type: Sealed Driver Type: 10TW3-D4 Nominal Impedance: 2 ohms Continuous Power Handling: 400 watts (RMS method) INCLUDED EQUIPMENT (1) XD500/3 Amplifier (1) Pair C2-690tx Speakers (1) HD-RLC Thank you for choosing a JL Audio StealthMod System for your automotive sound system. With proper installation, your new vehicle-specific audio system will deliver years of listening pleasure. We strongly recommend that you have your new StealthMod System installed by your authorized JL Audio dealer. The installation professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle properly. If you prefer to perform your own installation, please read this installation guide completely before beginning the process. INCLUDED HARDWARE (2) Bracket (4) 1/4-20 x 1 Bolt (4) 1/4 Lock Washer (4) 1/4 Flat Washer (2) 1/4-20 U-Nut (2) Speaker Adaptor (4) Thin Foam Strip (2) Thick Foam Strip (8) #8 x 3/4 Pan Head Screw (8) #12 x 1 Pan Head Screw (4) #8 x 1 Pan Head Screw (1) 60A Power Wire (1) 60A Ground Wire (1) Remote Turn-on Wire (1) 16 Gauge Speaker Cable (1) 12 Gauge Speaker Cable (1) XD-MFB-MAXI Fuse Holder (1) XD-MAXI-50 (1) XD-MGLU Ground Lug (1) XD-CLRAIC2-18 Audio Interconnects (1) XD-CLRAIC2-SW Speaker Wire to RCA Adaptor (2) 2.2 uf Capacitor
2 POWER RECOMMENDATION The diagram below shows the recommended crossover settings for the XD500/3. For a detailed description of the amplifier settings, consult the owner s manual for the amplifier. Page 2 JL Audio, Inc., 2013
3 STEP 1 Begin the StealthMod System installation by removing the factory head unit. STEP 5 Carefully unclip the factory head unit. Unplug the harnesses and remove the head unit. STEP 2 Carefully pry the climate control panel out using a plastic panel tool. STEP 6 Cut the four front speaker wires a few inches from the harness. RF (+) = blue RF (-) = green LF (+) = violet LF (-) = pink Connect the Speaker Wire to RCA Adaptors to the head unit side and the Speaker Cable to the wire side. Connect the Audio Interconnect to the Speaker Wire to RCA Adaptors. Route the Audio Interconnects and the Speaker Cable behind the dash and down to the passenger kick panel. STEP 3 Unlpug the climate control panel harnesses and remove the panel. STEP 7 Route the HD-RLC Cable to the desired remote mounting location, and follow the instructions included with the HD-RLC for proper mounting. Continue routing the cables down the passenger sill panel as shown. STEP 4 Locate and remove the four 10 mm bolts from behind the climate control panel. STEP 8 Route the cables under the rear carpet to the amplifier mounting location on the Stealthbox. Reinstall the factory head unit, driver s kick panel, and sill panel. Page 3 JL Audio, Inc., 2013
4 STEP 9 Connect the Fuse Holder to the terminated end of the Power Wire within 12 of the ring terminal. Connect the ring terminal to the positive battery terminal. STEP 13 Carefully unclip and remove the driver s sill panel and kick panel. Route the Power Wire down through the driver s kick panel as shown. STEP 10 Connect the remaining Power Wire to the opposite end of the Fuse Holder and route the wire through the engine compartment, and secure it away from any hot or moving parts. STEP 14 Continue to route the Power Wire under the driver s sill panel as shown. Remove the driver s side storage panel behind the rear seat. Note: Do not install the Fuse at this time. S T E P 11 Carefully drill a **** hole in the firewall and insert the grommet into the hole. Route the Power Wire through the grommet as shown. STEP 15 Empty out the back seat of the vehicle and fold the seats down. Before drilling, always make sure that you are not going to be drilling into any gas lines, brake lines, tires, transmission lines, electrical wiring, exhaust systems or anything else that might cause a reduction in your weekly pay. Always wear eye protection when drilling! STEP 12 Pictured is the Power Wire entering the cabin on the firewall. STEP 16 Carefully unclip the seat bolt covers at the corners of the rear seat backs. Unbolt and remove the seat backs. Page 4 JL Audio, Inc., 2013
5 STEP 17 Empty out the storage pocket. Remove the clips that hold in the rear panel and remove the panel. STEP 21 Reinstall the panel. Drill through the pilot holes made in the previous step to create pilot holes in the metal. Use caution so as not to drill through the back of the cab. Remove the panel again. Before drilling, always make sure that you are not going to be drilling into any gas lines, brake lines, tires, transmission lines, electrical wiring, exhaust systems or anything else that might cause a reduction in your weekly pay. Always wear eye protection when drilling! STEP 18 Scrape away a small portion of paint, and secure the Ground Wire to the vehicle using the Ground Lug as shown. STEP 22 Measure and mark 1 to the right of each pilot hole. Enlarge the 1/8 pilot holes in both the metal and the plastic to 7/16. Use caution so as not to drill through the back of the cab. STEP 19 Route and secure the Power Wire and Ground Wire along the rear brace as shown. STEP 23 Drill 3/4 holes on the marks made in the previous step. Use caution so as not to drill through the back of the cab. STEP 20 On the backside of the rear panel, locate the two recessed areas, then measure and mark 1 down the center from the edge as shown. Drill a 1/8 pilot hole on the mark. STEP 24 Slide a 1/4-20 U-Nut through each of the 3/4 holes and align them with the 7/16 holes as shown. Page 5 JL Audio, Inc., 2013
6 STEP 25 If an amplifier will be mounted into the recess in the front of the Stealthbox, set the enclosure into position and mark the location of the wire channel. Remove the enclosure, and drill a 1 hole in the panel. Reinstall the panel into the vehicle. STEP 29 Secure the enclosure using a pair of 1/4-20 x 1 Hex Bolts, 1/4 Lock Washers, and 1/4 Flat Washers as illustrated. Secure the Amplifier to Stealthbox as shown using four #8 x 1 Pan Head Screws. STEP 26 Attach each Bracket to the threaded inserts in the top of the enclosure using a 1/4-20 x 1 Hex Bolt, a 1/4 Lock Washer, and a 1/4 Flat Washer as illustrated. STEP 30 Connect the Power Wire, Ground Wire, and Remote Turn-on Wire to the Amplifier. Plug in the Audio Interconnects and HD-RLC Cable. Connect the left and right 16 Gauge Speaker Cable to channels 1-2 (reverse the polarity of the right front speaker), and the 12 Gauge Speaker Cable to the subwoofer channel. STEP 27 Pictured is a Bracket attached to the Stealthbox. STEP 31 Pictured are the recommended Amplifier settings. A detailed illustration is on Page 2. STEP 28 Attach the 12 Gauge Speaker Cable to the Stealthbox and place the enclosure back into position. Route the cable to the amplifier mounting location. STEP 32 Install the Fuse into the Fuse Holder. Page 6 JL Audio, Inc., 2013
7 STEP 33 Begin the Speaker installation by opening the driver s door and rolling the window all the way down. STEP 37 Carefully unclip the upper trim panel. STEP 34 Unclip the screw cover behind the pull handle, and remove the screw. STEP 38 Starting at the bottom, carefully unclip each of the door panel clips, and remove the panel. STEP 35 Unclip the screw cover behind the release handle, and remove the screw. STEP 39 Unplug the speaker harness, and unbolt and remove the factory speaker. STEP 36 Remove the clip near the front of the door. STEP 40 Unplug the tweeter harness, and unbolt and remove the factory tweeter. Page 7 JL Audio, Inc., 2013
8 STEP 41 Remove the capacitor on the back of the factory tweeter. STEP 45 Pictured is the Speaker mounting hardware. STEP 42 Solder a 2.2 uf Capacitor in place of the one removed in the previous step. STEP 46 Place a piece of Thin Foam around the factory speaker hole as shown. STEP 43 Route a piece of 16 Gauge Speaker Cable from the factory speaker hole to the wiring harness as shown. STEP 47 Bolt the Speaker Adaptor to the factory holes using four #12 x 1 Pan Head Screws. STEP 44 Connect the 16 Gauge Speaker Cable to the factory wire, using the color code in Step 6 as a guide. STEP 48 Place a second piece of Thin Foam around the Speaker Adaptor hole as shown. Page 8 JL Audio, Inc., 2013
9 STEP 49 Connect the 16 Gauge Speaker Cable to the Speaker, and secure it to the Speaker Adaptor using four ****. Place a piece of Thick Foam around the outside of the Speaker as shown. CONGRATULATIONS! You have completed the installation for this model. Enjoy your new StealthMod System! Reinstall the door panel. STEP 50 Repeat Steps for the passenger door. MID/HIGH FREQUENCY DRIVER FITMENT A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle. Rear Speaker Size / Location: 6-1/2 - Rear Door Fits JL Audio Models: TR650-CXi, C2-650x, C3-650, & C5-650x (954) Page 9 JL Audio, Inc., 2013 All specifications are subject to change without notice. JL Audio and the JL Audio logo, Stealthbox and the Stealthbox logo are registered trademarks of JL Audio, Inc.,. Ahead of the Curve and its respective logo is a trademark of JL Audio, Inc.,. JLA-SKU# Printed in USA 2011 JL Audio, Inc.,. U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902 #6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending. For more detailed information please visit us online at N O R T H C O M M E R C E P A R K W A Y M I R A M A R, F L O R I D A U S A
SB-H-XTOUR/10W3v3 SKU# Honda Crosstour
INSTALLATION GUIDE for the SB-H-XTOUR/10W3v3 SKU# 94543 2010-2015 Honda Crosstour If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be properly mounted to the
More informationSB-C-CTS/10TW3 SKU# & Up Cadillac CTS/CTS-V
INSTALLATION GUIDE for the SB-C-CTS/10TW3 SKU# 94552 2008 & Up Cadillac CTS/CTS-V If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be properly mounted to the
More informationSB-H-CRV2/10TW3 SKU# & Up Honda CRV
If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly
More informationSB-F-150-SPRCRW/13TW5v2 SKU# Up Ford F-150 SuperCrew & 2017-Up Ford SuperDuty Crew Cab
If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly
More informationSB-GM-CAM6G/12TW3 SKU# & Up Chevrolet Camaro Coupe
If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly
More informationINSTALLATION GUIDE for the
INSTALLATION GUIDE for the SB-GM-TAHOCNSL/10W1v3 SKU# 94278 2007-2013 Chevrolet / GMC Full-Size SUV s & Trucks Suburban, Tahoe, Yukon/ XL, Yukon Denali/ XL Denali, Avalanche, Silverado, & Sierra/Denali
More informationINSTALLATION GUIDE for the
INSTALLATION GUIDE for the SB-GM-TAHOCNSL/10W1v2 2007 - Up Chevrolet / GMC Full-Size SUV s & Truck Avalanche, Suburban, Tahoe, Yukon & Yukon XL with bucket seats and factory console If you choose to perform
More information2 OUT. SB-F-EXPEDEL/10W3v3 SKU# Up Ford Expedition EL (long wheel base) INSTALLATION GUIDE for the
INSTALLATION GUIDE for the SB-F-EXPEDEL/10W3v3 SKU# 94343 2007 - Up Ford Expedition EL (long wheel base) If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be
More informationSB-F-SUPRCNSL2/8W7 SKU# Up Ford Super Duty Trucks with front bucket seating
INSTALLATION GUIDE for the SB-F-SUPRCNSL2/8W7 SKU#94345 2008-Up Ford Super Duty Trucks with front bucket seating If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox
More informationSB-Y-YXZ1SPKR/MX650 SKU# & Up Yamaha YXZ1000R
If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly
More informationSlamPak SLPK-CAN-SPYDER1 SKU#94491& I n s t a l l a t i o n G u i d e for the
SlamPak I n s t a l l a t i o n G u i d e for the SLPK-CAN-SPYDER1 SKU#94491& 94490 If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be properly mounted to
More informationINSTALLATION GUIDE for the
INSTLLTION GUIDE for the SB-P-CYNNE/10W6v2/BK 2003-2006 Porsche Cayenne If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox be properly mounted to the vehicle
More informationStealthbox. STEP 1: Engage the emergency brake. Place the key into the ignition and turn to the accessory position.
Stealthbox INSTALLATION GUIDE for the SB-GM-BURBSCNSL/10W3v2 (2003-Up Chevrolet Suburban,Tahoe, Silverado & GMC Yukon,YukonXL, Sierra with front bucket seats and center console) START HERE Read the instructions
More informationDODGE RAM QUAD CAB. Vehicle Specific Subwoofer Enclosure. Made in the USA
DODGE RAM QUAD CAB Vehicle Specific Subwoofer Enclosure Made in the USA READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING MOUNTING LOCATION: The enclosure mounts under the rear seat on Dodge Quad Cab Trucks.
More informationPRAMCQ13. Designed for Dodge Ram vehicles with base audio Not Compatible with 2018 and newer Dodge Ram vehicles
PRAMCQ13 Designed for 2013 2017 Dodge Ram vehicles with base audio Not Compatible with 2018 and newer Dodge Ram vehicles Subwoofer Alternate Amplifier Bracket Amplifier Subwoofer Harness Subwoofer Amplifier
More informationOWNER S MANUAL RANGER-10 POLARIS RANGER AMPLIFIED SUBWOOFER ENCLOSURE
OWNER S MANUAL RANGER-10 POLARIS RANGER AMPLIFIED SUBWOOFER ENCLOSURE IMPORTANT NOTICE If you have any questions regarding wire routing in a vehicle, please contact MTX Technical Support at 1-800-225-5689.
More informationOWNER S MANUAL M880-CCX-SG (LED)
OWNER S MANUAL M880-CCX-SG () Cockpit Coaxial Speaker Systems with Illumination Thank you for purchasing a JL Audio Marine Coaxial Speaker System. With proper installation, your new speakers will deliver
More informationPFSDC12. Designed for 2012 and newer Ford F250/F350 Super Crew vehicles Stillwater Designs PFSDC12-A Subwoofer Enclosure
PFSDC12 Designed for 2012 and newer Ford F250/F350 Super Crew vehicles Subwoofer Enclosure Amplifier/Bracket Assembly Subwoofer Power Harness Amplifier Harness Subwoofer Harness Amplifier Power Harness
More informationGN-3A Polaris General SSV Works 3 Speaker Audio Kit
GN-3A Polaris General SSV Works 3 Speaker Audio Kit pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 17 Kick Panel Speakers Installation pg 21 MRB3 and Dash
More informationowner s manual 3.50-inch (90 mm) Coaxial Loudspeakers
owner s manual 3.50-inch (90 mm) Coaxial Loudspeakers Thank you for choosing a JL Audio Evolution C2 Coaxial Speaker System for your automotive sound system. These Evolution Speakers have been designed
More informationFORD F-150 CREW CAB. Vehicle Specific Subwoofer Enclosure. Made in the USA
FORD F-150 CREW CAB Vehicle Specific Subwoofer Enclosure Made in the USA READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING MOUNTING LOCATION: The enclosure mounts under the rear seat on drivers side of Ford
More informationGT-BassPro12. powered automotive subwoofer. Owner s Manual
GT-BassPro12 powered automotive subwoofer Owner s Manual Introduction Thank you for choosing the JBL GT-BassPro12 powered automotive subwoofer. The GT-BassPro12 has been designed to deliver great bass
More informationPF150SC15. Designed for 2015 and newer Ford F150 Super-Cab and Super-Crew vehicles without Sony System Stillwater Designs PF150SC15-A
PF150SC15 Designed for 2015 and newer Ford F150 Super-Cab and Super-Crew vehicles without Sony System Subwoofer Assembly Amplifier Assembly Amplifier Harness 2015 Stillwater Designs PF150SC15-A2-20160502
More informationINSTALLATION. Figure 1. Figure 2.
THANK YOU for choosing the JBL BassPro II. BassPro II has been designed to deliver great bass performance from a compact, easily installed powered subwoofer enclosure. To get the best performance from
More informationSF150C09. Designed for Ford F150 Super-Crew vehicles (not compatible with trucks that have Sony Factory Premium Audio) Subwoofer Assembly
SF150C09 Designed for 2009-2014 Ford F150 Super-Crew vehicles (not compatible with trucks that have Sony Factory Premium Audio) Subwoofer Assembly Subwoofer Power Harness Subwoofer Body Harness M6 Bolts
More informationDesigned for 2015 Ford F150 Super-Cab and Super-Crew vehicles (Compatible in vehicles with or without Sony System. M6 Bolt X 2
SF150SC15 Designed for 2015 Ford F150 Super-Cab and Super-Crew vehicles (Compatible in vehicles with or without Sony System Subwoofer Assembly Amplifier Relocation Bracket (not used on non Sony trucks)
More informationowner s manual 4.00-inch (100 mm) Coaxial Loudspeakers
owner s manual 4.00-inch (100 mm) Coaxial Loudspeakers Thank you for choosing a JL Audio Evolution C2 Coaxial Speaker System for your automotive sound system. These Evolution Speakers have been designed
More informationPWRA215. Designed for 2015 and newer Jeep Wrangler two door with base audio. T-TAP x2 10MM BOLT FUSE WIRE TIES x6 SUBWOOFER ASSEMBLY
PWRA215 Designed for 2015 and newer Jeep Wrangler two door with base audio T-TAP x2 10MM BOLT FUSE WIRE TIES x6 SUBWOOFER ASSEMBLY 200 WATT AMP BRACKET ASSEMBLY POWER HARNESS 2015 Stillwater Designs PWRA215
More informationOWNER S MANUAL. Cockpit Coaxial Speaker Systems MX650-CCX / MX770-CCX
OWNER S MANUAL MX650-CCX / MX770-CCX Cockpit Coaxial Speaker Systems Thank you for purchasing a JL Audio Marine Coaxial Speaker System. With proper installation, your new speakers will deliver years of
More informationPHASE 3 POWERSPORTS AUDIO KIT RZR POLARIS. pg 2 Disassembly, Wire and Amplifier Plate Installation. pg 9 Glovebox Subwoofer Installation
POLARIS RZR PHASE 3 POWERSPORTS AUDIO KIT pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation pg 25 MRB3 and Dash Kit Installation
More information*Phillips Screwdriver *10mm Nut Driver *8mm Nut Driver*10mm Socket *Ratchet *Three Inch Putty Knife*Panel Removal Tool *10mm Wrench
TOOLS REQUIRED: *Phillips Screwdriver *10mm Nut Driver *8mm Nut Driver*10mm Socket *Ratchet *Three Inch Putty Knife*Panel Removal Tool *10mm Wrench CONTENTS: 1EA. SUBWOOFER ASSEMBLY P/N 05030280AA 1EA.
More informationSWRA211. T-TAP x2 10MM BOLT FUSE WIRE TIES x6 SUBWOOFER ASSEMBLY 200 WATT AMP BRACKET ASSEMBLY POWER HARNESS OVERLAY HARNESS.
SWRA211 Designed for 2011-2014 Jeep Wrangler two door with base audio or premium audio T-TAP x2 10MM BOLT FUSE WIRE TIES x6 SUBWOOFER ASSEMBLY 200 WATT AMP BRACKET ASSEMBLY POWER HARNESS 2012 Stillwater
More informationSRAMCQ09. Designed for Dodge Ram vehicles Stillwater Designs SRAMCQ Subwoofer. Subwoofer Harness.
SRAMCQ09 Designed for 2009-2018 Dodge Ram vehicles Subwoofer Alternate Amp Bracket Subwoofer Harness Subwoofer Amplifier Wire Ties x 6 Adapter Harness Subwoofer Power Harness Bolt (only for solid rear
More information* * Inside Toyota Avalon. Tools Required IMPORTANT
Revision 08/02/16 2013- Toyota Avalon IMPORTANT Before starting, compare items on your invoice with items received. Carefully check through packaging material. If any item is missing, please call Crutchfield
More information*Phillips Screwdriver *10mm Nut Driver *10mm Socket *Ratchet *Three Inch Putty Knife *Panel Removal Tool *10mm Wrench CONTENTS:
TOOLS REQUIRED: *Phillips Screwdriver *10mm Nut Driver *10mm Socket *Ratchet *Three Inch Putty Knife *Panel Removal Tool *10mm Wrench CONTENTS: 1EA. SUBWOOFER ASSEMBLY 1EA. 100 WATT AMP ASSEMBLY 1EA. WIRE
More informationImportant! The subwoofer system is designed to be used only with the rear seat in the up position only.
Important! The subwoofer system is designed to be used only with the rear seat in the up position only. CONTENTS 1EA. SUBWOOFER ASSEMBLY 2EA. BRACKET LOWER 2EA. BRACKET UPPER 1EA. OVERLAY HARNESS 2EA.
More informationDesigned for 2005 & newer Ford Mustang (Not compatible with Convertible)
Designed for 2005 & newer Ford Mustang (Not compatible with Convertible) SMUS05 Subwoofer Enclosure Assembly Power Harness Body Harness Input Adapter Wire Ties x6 M6 Nut 25A Fuse Wire Taps x2 SMUS05 A.2
More informationCongratulations on your purchase of the SSL LoPro10, amplified Under Seat Subwoofer.
Congratulations on your purchase of the SSL LoPro10, amplified Under Seat Subwoofer. It has been designed, engineered and manufactured to bring you the highest level of performance and quality, and will
More informationSFSDC08. Designed for 2008-present Ford F250/F350 Super Crew vehicles. Adaptor Harness. Subwoofer Power Harness
SFSDC08 Designed for 2008-present Ford F250/F350 Super Crew vehicles Subwoofer Enclosure Subwoofer Harness Adaptor Harness Wire Ties Wire Taps Fuse Factory Amplifier Relocation Bracket, Nut and Bolt Subwoofer
More informationSCION XB SUBWOOFER ENCLOSURE Preparation
Preparation Part Number: Kit Contents Item # Quantity Reqd. Description 1 1 Subwoofer enclosure 2 1 Wire Harness 3 1 Paper Template 4 1 Plastic Drill Template 5 1 Hardware Bag Hardware Bag Contents 1 Item
More informationOWNER S MANUAL inch (130 mm) Coaxial Loudspeakers. Thank you for choosing JL Audio loudspeakers for your automotive sound system.
OWNER S MANUAL 5.25-inch (130 mm) Coaxial Loudspeakers Thank you for choosing JL Audio loudspeakers for your automotive sound system. We strongly recommend that you have your new loudspeakers installed
More informationMY F150 CrewCab 1. Tools Required E F G. Page 1 of 10 9L3J-19A014-AA Copyright Ford 2013 FoMoCo
2009-2014MY F150 CrewCab 1 Tools Required A B C D 3X E F G H 2X I 6X 3X Page 1 of 10 9L3J-19A014-AA Copyright Ford 2013 FoMoCo 2009-2014MY F150 CrewCab 2 Subwoofer Power Wire Routing All Vehicles WARNING:
More informationTOYOTA TACOMA XSP-X LED DRL. Part Number: Accessory Code: LDRL10
TOYOTA TACOMA 2013 - XSP-X LED DRL Part Number: 00016-35230 Accessory Code: LDRL10 Conflicts -None Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3 1 Harness bag 4 Hardware Bag
More informationSSUTAYU15. Designed for 2015 and newer Chevrolet Tahoe/Suburban and GMC Yukon/Yukon XL vehicles
SSUTAYU15 Designed for 2015 and newer Chevrolet Tahoe/Suburban and GMC Yukon/Yukon XL vehicles Subwoofer Assembly Subwoofer Harness Subwoofer Power Harness 2018 Stillwater Designs SSUTAYU15-20180313 Wire
More informationRZ3-5K Polaris RZR XP 1000 & 900 Kicker 5 Speaker Audio Kit
PO H PWER PO 5 O KIT I E D U A S A TS S I R LA R Z R R O SP pg 2 pg 9 pg 13 pg 25 pg 29 Disassembly, Wire and Amplifier Plate Installation Glovebox Subwoofer Installation Kick Panel Speakers Installation
More informationAudio System Upgrade Package 2007-UP Jeep Wrangler (Premium Audio) 4-Door & 2- Door Operating and Installation Instructions
2007-UP Jeep Wrangler (Premium Audio) 4-Door & 2- Door Operating and Congratulations, you just purchased one of the most sophisticated 32 bit digital audio amplifiers available today. Fortunately, all
More informationConflicts Note: Toyota Tacoma 2015 LED Bed Lights Preparation. Part Number: Accessory Code: BU1000
Toyota Tacoma 2015 LED Bed Lights Preparation Part Number: 00016-34089 Accessory Code: BU1000 Conflicts Note: Kit Contents Item # Quantity Reqd. Description 1 1 Hardware Kit 2 1 Driver s Side LED assembly
More informationRZ3-5A Polaris RZR XP 1000 & 900 SSV Works 5 Speaker Audio Kit
RZ3-5A Polaris RZR XP 1000 & 900 SSV Works 5 Speaker Audio Kit pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation pg 25
More informationIMPORTANT. Tools Needed: (depending upon vehicle) Phillips Screwdriver. Drill & Bit Set. Wire Stripper/ Crimp Tool
Revision 3/14/05 Amplifier Installation Guide IMPORTANT Before starting, compare items on your invoice with items received. Carefully check through packaging material. If any item is missing, please call:
More informationPart Number: T4R-2N1. Hardware Bag Contents. General Applicability Models with factory fog light. Conflicts -
Date: 07.30.2015 TOYOTA TUNDRA 2014-2016 LED Fog Light & DRL 2 in 1 Part Number: T4R-2N1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4 1 User
More informationPart Number: TTA-712. Hardware Bag Contents. General Applicability All models
Date: 09.30.2013 TOYOTA TACOMA 2012-15 LED DRL Part Number: TTA-712 Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Switch Hardware
More informationTOYOTA PRIUS C FOG LIGHT (Halogen & LED)
TOYOTA PRIUS C 2012-14 FOG LIGHT (Halogen & LED) Part Number: TPC-312 / TPC-812 Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 2 Bezels 3 1 Switch Assembly 4 1 Fog Light Operation guide
More informationTOYOTA TACOMA Part Number: TTA-BGB16-DRL TTA-BGP16-DRL
TOYOTA TACOMA 2016-17 Date: 10.29.2016 Billet Grille w/led DRL Part Number: TTA-BGB16-DRL TTA-BGP16-DRL Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3 1 Switch 4 1 User Card
More informationPart Number: TTA-2N1. Hardware Bag Contents. General Applicability SR5, TRD Sport, TRD Off-Road, Limited
Date: 2.10.2016 TOYOTA TACOMA 2016-2 in 1 LED UPGRADE KIT Part Number: TTA-2N1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4 1 User s card
More informationRZ3-3A Polaris RZR XP 1000 & 900 SSV Works 3 Speaker Audio Kit
RZ3-3A Polaris RZR XP 1000 & 900 SSV Works 3 Speaker Audio Kit pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation pg 25
More informationCONTENTS TOOLS REQUIRED:
CONTENTS 1EA. SUBWOOFER ASSEMBLY P/N 77KICK13SUBASSEMBLY 1EA. SUB BRACKET P/N 05030060AA 1EA. 200 WATT AMP P/N REBTL200 1EA. AMP BRACKET P/N RMDR 1EA. POWER HARNESS P/N RHRAMP 1EA. OVERLAY HARNESS P/N
More informationPart Number: T4R-2IN1
Date: 12.11.2014 TOYOTA HIGHLANDER 2015 LED Fog Light & DRL 2in1 Part Number: T4R-2IN1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4 1 User
More informationLEXUS CT 200h ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT922-89100 Kit Contents Item # Quantity Req'd. Description 1 1 Door Sill, Front Right Hand 2 1 Door Sill, Front Left Hand 3 1 Door Sill, Rear Right Hand 4 1 Door Sill, Rear Left
More informationPart Number: T4R-2N1. Hardware Bag Contents. General Applicability. Conflicts - Limited Models
Date: 12.11.2014 TOYOTA HIGHLANDER 2014-2016 LED Fog Light & DRL 2 in 1 Part Number: T4R-2N1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4
More informationINSTALLATION INSTRUCTIONS. Rear Vision System Aftermarket Display 2009-Current Dodge Ram (Kit part number )
Rear Vision System Aftermarket Display 2009-Current Dodge Ram (Kit part number 1009-6503) Kit Contents: Chassis Harness with RCA (Note: In some cases a RCA extension may be required to connect to your
More informationPART NUMBER: H630SSJ000. Kit Contents: A. Amplifier with Bracket (1) D. Badge (2) with push nuts (4)
Kit Contents: A. Amplifier with Bracket (1) D. Badge (2) with push nuts (4) E. Clip B. Harness (1) C. Cable tie (8) F. Mounting Hardware (2) G. Replacement Speaker (2) H. HVAC Duct extension (2) IMPORTANT:
More informationJeep Wrangler PSS-20WRA Sound System Installation Manual Model: Wrangler Unlimited Model Year:
UNLIMITED 1/20 Jeep Wrangler PSS-20WRA Sound System Installation Manual Model: Wrangler Unlimited Model Year: 2007 2014 *Not compatible with factory amplified systems Jeep Model Year Wrangler Unlimited
More informationConflicts. TOYOTA Prius Foglights. Part Number: Accessory Code: LF1. Factory Fog Lights
TOYOTA Prius 2011- Foglights Part Number: 00016-47401 Accessory Code: LF1 Conflicts Factory Fog Lights Item # Quantity Reqd. Description 1 2 Fog Lamps 2 2 Fog Lamp s bezels 3 1 Switch Assembly 4 1 Fog
More informationCONTENTS TOOLS REQUIRED: *Ratchet*13mm Socket*10mm Socket*Phillips Screwdriver*Pliers*Panel Removal Tool. Subwoofer Installation
CONTENTS 1EA. SUBWOOFER ASSEMBLY P/N 77KICK40SUBASSEMBLY 1EA. 200 WATT AMP P/N RE08BTL2000R 1EA. POWER HARNESS P/N RHWRANGLERPWR 1EA. OVERLAY HARNESS P/N RHWRANGLER 2EA. T-TAP P/N RFTTAPB 1EA. FUSE 30
More informationJeep JK Wrangler XHD Rear Tire Carrier
Contents: 1. Frame (1) 2. Pivot Mount (1) 3. Latch Mount (1) 4. Lug Nuts (3) 5. Catch Pin (1) 6. M12 Washer (18) 7. M12 x 30 Hex Bolt (14) 8. Brake Light Mount (1) 9. Snap Ring (1) 10. Rub Strip (1) 11.
More informationSCAMA10. Designed for Chevrolet Camaro vehicles. Subwoofer Assembly. Subwoofer Bracket Wire Ties x6 Wire Taps x2 Rubber Bumper
SCAMA10 Designed for 2010-2015 Chevrolet Camaro vehicles Subwoofer Assembly Subwoofer Harness Subwoofer Bracket Wire Ties x6 Wire Taps x2 Rubber Bumper 2012 Stillwater Designs SCAMA10-A3-20151028 M6 Nut
More informationBAK1500 INSTALLATION/OWNER'S MANUAL Compact Amplified Subwoofer
BAK1500 INSTALLATION/OWNER'S MANUAL Compact Amplified Subwoofer PREPARATION Getting Started Thank you for purchasing the Dual BAK1500 compact amplified subwoofer. Although Dual has attempted to ensure
More informationInstallation Instructions Product-Ident: 75138
12.08.10 12:27 doorboards with soundsystem, Porsche 987 Boxster / Cayman Technical Details: Car Features: 2-doors, also for models with doorairbag, electrical window controls Model/Year: Boxster (987)
More informationpg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers Installation
RZ3-5KRC RZR XP1000 & 2015+ RZR900 with Ride Command SSV Works 5 Speaker Audio Kit pg 2 Disassembly, Wire and Amplifier Plate Installation pg 9 Glovebox Subwoofer Installation pg 13 Kick Panel Speakers
More informationINSTALLATION INSTRUCTIONS. Rear Vision System Aftermarket Display 2009-Current Dodge Ram (Kit part number )
Rear Vision System Aftermarket Display 2009-Current Dodge Ram (Kit part number 1009-6503) Kit Contents: Chassis Harness with RCA Endgate Handle with Camera 1 bag containing: Wire Ties (Qty: 17) Bottle
More informationJHP 04 GTO SPORTS BINNACLE KIT INSTALL GUIDE
JHP 04 GTO SPORTS BINNACLE KIT INSTALL GUIDE NOTE: If you don't feel comfortable with any of the following steps, you should find a professional to do the installation. 1) Use a piece of tape as shown
More informationMY F150 SuperCab 1. Tools Required. Page 1 of 12 9L3J-19A014-BA Copyright Ford 2013 FoMoCo
2009-2014MY F150 SuperCab 1 Tools Required A B C D E F G 3X 6X 3X H I J 2X 3X 3X K L M N 3X Page 1 of 12 9L3J-19A014-BA Copyright Ford 2013 FoMoCo 2009-2014MY F150 SuperCab 2 Subwoofer Power Wire Routing
More informationTOYOTA TACOMA FOG LIGHT
TOYOTA TACOMA 2012 - FOG LIGHT Part Number: 00016-35220 Accessory Code: LF10 Conflicts - Factory Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 1 Hardware bag 3 1 Switch Assembly
More informationPCAMA13MY. Designed for Chevrolet Camaro vehicles with MyLink. Subwoofer Assembly. Subwoofer Bracket Wire Ties x6 Rubber Bumper
PCAMA13MY Designed for 2013-2015 Chevrolet Camaro vehicles with MyLink Subwoofer Assembly Subwoofer Harness Adapter Harness Subwoofer Bracket Wire Ties x6 Rubber Bumper 2012 Stillwater Designs PCAMA13MY-A3-20151028
More informationTOYOTA TACOMA LED DRL Black-Out
TOYOTA TACOMA 2013 - LED DRL Black-Out Part Number: 00016-35021 Accessory Code: LDBO10 Conflicts - Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 DRL Housing 2 1 Driver Box 3 1 Harness bag
More informationTOYOTA PRIUS C FOG LIGHT
TOYOTA PRIUS C 2012 - FOG LIGHT Part Number: 00016-47160 Accessory Code: LF10 Conflicts NONE Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 2 Fog Lamp s bezels 3 1 Switch Assembly 4 1 Fog
More informationCONTENTS: 1EA. SUBWOOFER HARNESS 2PIECE TOOLS REQUIRED:
CONTENTS: 1EA. SUBWOOFER ENCLOSURE 1EA. SUBWOOFER HARNESS 2PIECE 2EA. T-TAP 1EA. FUSE 30 AMP 6EA. WIRE TIES 1EA. INSTRUCTIONS P/N 77KICK14SUBASSEMBLY P/N RHPM1 P/N RFTTAPB P/N RFUSE30 P/N RFZIP6 P/N RBI77KICK14
More informationPart Number: TTU-BGB14-DRL TTU-BGP14-DRL
11/15/16 TOYOTA TUNDRA 2014-17 Billet Grille w/led DRL Part Number: TTU-BGB14-DRL TTU-BGP14-DRL Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3 1 Switch 4 1 User Card 5 2 Hardware
More information* * Inside Ram. Tools Required 1500, 2500, 3500 IMPORTANT
Revision 10/07/14 IMPORTANT Before starting, compare items on your invoice with items received. Carefully check through packaging material. If any item is missing, please call Crutchfield Technical Support
More informationPART NUMBER: H630SXC001. Kit Contents: A. Amplifier with Bracket (1) D. Badge (2) with push nuts (4)
Kit Contents: A. Amplifier with Bracket (1) D. Badge (2) with push nuts (4) E. Clip B. Interface / Power Harness (1) C. Cable tie (8) F. Mounting Nuts (2) G. Replacement Front Speaker (2) H. Badge mounting
More informationPSIEXT16I. Designed for 2016 and newer 1500 Series and Heavy Duty GM Silverado/Sierra Double Cab vehicles with 7 inch touchscreen radio
PSIEXT16I Designed for 2016 and newer 1500 Series and Heavy Duty GM Silverado/Sierra Double Cab vehicles with 7 inch touchscreen radio Not compatible with Bose Audio Not compatible with 4.2 inch radio
More informationTOYOTA COROLLA FOG LIGHT
Doc. 03.69.00 PIO / DIO Rev. C 10/11/12 TOYOTA COROLLA 2012 - FOG LIGHT Part Number: 00016-32118 Accessory Code: LF10 Conflicts - Factory code PM on model 1838 Kit Contents Item # Quantity Reqd. Description
More informationINSTALLATION INSTRUCTIONS
Rear Vision System Liftgate Emblem Camera Mirror Display 2009-2012 Ford Flex (Kit part number 1008-9527) Kit Contents: Mirror Liftgate Emblem Mount with Camera Interior (shorter) Harness Chassis (longer)
More informationPHASE 3 POWERSPORTS AUDIO KIT MAVERICK X3 CAN-AM. pg 3 Disassembly, Wire and Amplifier Plate Installation. pg 11 Dash Kit Installation
CAN-AM MAVERICK X3 PHASE 3 POWERSPORTS AUDIO KIT pg 3 Disassembly, Wire and Amplifier Plate Installation pg 11 Dash Kit Installation pg 15 Underseat Subwoofer Installation pg 19 Dash Speaker Pods Installation
More information2012 U.S. Retail Mobile Audio Price List
2012 U.S. Retail Mobile Audio Price List MOBILE MARINE POWERSPORTS Prices effective February 1, 2012 Table of Contents Subwoofer Drivers W7AE Subwoofer Drivers...4 W6v2 Subwoofer Drivers...4 TW5 Thin-Line
More informationINSTALLATION GUIDE PHANTOM TM SUBWOOFER SYSTEM. FOR BMW 3-SERIES SEDAN (F30) ver. 10/2016 DO-IT-YOURSELF 2 OUT OF HOURS F30 SEDAN
INSTALLATION GUIDE PHANTOM TM SUBWOOFER SYSTEM FOR 2012+ BMW 3-SERIES SEDAN (F30) ver. 10/2016 SKILL LEVEL REQUIRED DO-IT-YOURSELF INSTALLATION DIFFICULTY 2 OUT OF 5 INSTALLATION TIME 1.5 HOURS APPLIES
More informationTOYOTA im INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT922-12170 Kit Contents Item # Quantity Reqd. Description 1 1 Main Wire Harness 2 1 Switch 3 1 Switch Header 4 1 ECU 5 1 ECU Bracket 6 1 Hardware Kit 7 1 Instruction Card 8 1
More informationCAMRY STRIP LED DRL TOYOTA Part Number: Accessory Code: LDRS10. PIO / DIO Rev. A 02/26/13. Doc
Doc. 02.126.00 TOYOTA CAMRY PIO / DIO Rev. A 2013-02/26/13 STRIP LED DRL Part Number: 00016-32280 Accessory Code: LDRS10 Conflicts - Only works on Camry SE Kit Contents Item # Quantity Reqd. Description
More informationInstallation Instructions Product-Ident: 75101
Doorboards with soundsystem, W 209 CLK convertible, coupé Technical Details: Car Features: 2-doors Model/Year: W 209 (06.2002) Setup-Advice: To reach the best performance, the setup of the radio (Bass,
More informationConflicts: Vehicles without a sunroof Vehicles with a single sunroof
Toyota Sienna (Dual Sunroof) 2011-10.2 Overhead Video Part Number: 00016-00110 00016-00110-17 Fit Kit 00016-00120 00016-00120-17 Fit Kit Accessory Code: ED5 Conflicts: Vehicles without a sunroof Vehicles
More informationTOYOTA VENZA HANDS FREE BLU LOGIC Preparation
TOYOTA VENZA 2009- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: For kits manufactured
More information2015+ S550 MUSTANG Battery Relocation Kit WR-BTRYRELOKIT-LH WR-BTRYRELOKIT-RH
2015+ S550 MUSTANG Battery Relocation Kit WR-BTRYRELOKIT-LH WR-BTRYRELOKIT-RH The Watson Racing Battery Relocation Kit is NOT designed to protect you in the case of an accident, and therefore is INTENDED
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 22903-22963 ODYSSEY Issue Date MAY 2002 PARTS LIST Subwoofer Kit: P/N 08A39-EP7-100 Subwoofer 2 Cushion tapes 8 Wire ties (1 not used)
More informationInstallation Instructions Product-Ident: 75171
Doorboards with soundsystem, Mercedes Viano Technical Details: Car Features: electrical window controls Model/Year: Viano (09.2003) Setup-Advice: To reach the best performance, the setup of the radio (Bass,
More informationTOOLS REQUIRED: Panel Removal Tool Phillips Screwdriver 10mm Nut Driver Ratchet 10mm Socket 7mm Wrench 7mm Nut Driver Straight Screwdriver
CONTENTS: 1EA. FIVE CHANNEL AMPLIFIER/BRACKET ASSEMBLY P/N MPDSP039AA 1EA. OVERLAY HARNESS P/N RH41LX10 3EA. 7MM SCREWS P/N RF7MM 6EA. WIRE TIE P/N RFZIP6 1EA. 30 AMP FUSE P/N RFUSE30 1EA. INSTRUCTIONS
More informationTOYOTA TACOMA FOG LIGHT
TOYOTA TACOMA 2013 - FOG LIGHT Part Number: 00016-35220 Accessory Code: LF10 Conflicts - Factory Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 1 Hardware bag 3 1 Switch Assembly
More informationTOYOTA TACOMA LED DRL. Part Number: TTA-712
Part Number: TTA-712 Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Switch Hardware Bag Contents Item # Quantity Reqd. Description
More informationTOYOTA PRIUS V LED DRL Black-Out
TOYOTA PRIUS V 2012 - LED DRL Black-Out Part Number: 00016-47021 Accessory Code:LDBO10 Conflicts Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 DRL Housing 2 2 DRL s bezels 3 1 Driver Box
More informationPart Number: SFR-713. Hardware Bag Contents. General Applicability All models. Conflicts - Fog Lights. Date: SCION FRS LED DRL
Date: 01.30.2014 SCION FRS 2013-2015 LED DRL Part Number: SFR-713 Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Switch Hardware
More informationPart Number: T4R-2N1. Hardware Bag Contents. General Applicability Models with factory fog light
11/10/16 TOYOTA CAMRY 2012-2014 2 in 1 LED UPGRADE KIT Part Number: T4R-2N1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1
More information