SUC W 1R B P -O
|
|
- Mervin Hodge
- 5 years ago
- Views:
Transcription
1 DC-DC Converters PCB Mount Type SUCWR5 Ordering information SUC W R5 2 2 B P -O R Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP Packing form Blank:Plastic cover P :Tray (SMD type) 8Optional C :with coating (only DIP type)* * Safety standards are pending MODEL SUCWR5052 SUCWR5055 SUCWR522 SUCWR525 SUCWR5242 SUCWR5245 SUCWR5482 SUCWR5485 MAX OUTPUT WATTAGE[W] DC OUTPUT VOLTAGE[V] * t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 CURRENT[A] SPECIFICATIONS MODEL SUCWR5052 SUCWR5055 SUCWR522 SUCWR525 SUCWR5242 SUCWR5245 SUCWR5482 SUCWR5485 VOLTAGE[V] DC4.5-9 DC9-8 DC8-36 DC36-6 INPUT CURRENT[A] * typ 0.429typ 0.8typ 0.typ 0.089typ 0.086typ 0.045typ 0.043typ EFFICIENCY[%] *2 0typ 0typ 3typ 3typ 3typ 3typ 3typ 3typ VOLTAGE[V] t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) CURRENT[A] LINE REGULATION[mV] 60max 5max 60max 5max 60max 5max 60max 5max LOAD REGULATION[mV] 600max 50max 600max 50max 600max 50max 600max 50max RIPPLE[mVp-p] -20 to +55C *3 20max 20max 20max 20max 20max 20max 20max 20max -40 to -20C *3 50max 50max 50max 50max 50max 50max 50max 50max OUTPUT RIPPLE NOISE[mVp-p] -20 to +55C *3 50max 50max 50max 50max 50max 50max 50max 50max -40 to -20C *3 200max 200max 200max 200max 200max 200max 200max 200max TEMPERATURE REGULATION[mV] -20 to +55C 50max 80max 50max 80max 50max 80max 50max 80max -40 to +55C 240max 290max 240max 290max 240max 290max 240max 290max DRIFT[mV] *4 50max 60max 50max 60max 50max 60max 50max 60max START-UP TIME[ms] 20max (Minimum input, Io=00%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed ( pin open) t5% adjustable by external VR OUTPUT VOLTAGE SETTING[V] (t5%) PROTECTION CIUIT AND OTHERS OVEURRENT PROTECTION Works over 05% of rating and recovers automatically INPUT-OUTPUT ISOLATION INPUT-CASE OUTPUT-CASE ENVIRONMENT SAFETY OTHERS SU.SUC/SUT-26. OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD -40 to +85C, 20-95%RH (Non condensing) (Required Derating), 3,000m (0,000feet) max -40 to +00C, 20-95%RH (Non condensing), 9,000m (30,000feet) max 0-55Hz, 98.0m/s 2 (0G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s 2 (50G), ms, once each along X, Y and Z axis UL60950-, C-UL, EN X.0X3.2mm [0.88X0.28X0.52 inches] (WXHXD) / 3g max Convection/Forced air * Output pins can be connected in series to make a 24V/30V output. *2 Rated input 5V, 2V, 24V or 48V DC Io=00% *3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * Parallel operation with other model is not possible.
2 SUCWR5 External view.62 ±0.2. SMD(type B).62 ±0.2 Pin terminal part details.8± ± ±0.25 [0.4] (0-0 ) 2. DIP(type C) 0.6 ± min 0.± [0.88] ±0.6 [0.93] 22.4 [0.88] Adsorption area [0.52] [0.52] 0.min 2.54 Coplanarity within 0. 0.min ± ±0.2 Recommended Pad and Hole dia. (TOP VIEW) type B [0.08] 3.2 [0.3] [0.3] [0.99] type C º.6 6-º0.9 Unit : 0.inch Dimensions in mm, [ ]=inches Tolerance ±0.5 [±0.02] Dimensions in mm, [ ]=inches Pin terminal thickness : 0.3±0. Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.2±0.05 [0.008] Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Weight : 3g max [0.8] 2.44 SU.SUC/SUT-2.
3 DC-DC Converters PCB Mount Type SUCW3 Ordering information SUC W B P -O R Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP Packing form Blank:Plastic cover P :Tray (SMD type) 8Optional G :Capacitor between Input and Output is removed. C :with coating (only DIP type)* * Safety standards are pending MODEL SUCW3052 SUCW3055 SUCW322 SUCW325 SUCW3242 SUCW3245 SUCW3482 SUCW3485 MAX OUTPUT WATTAGE[W] DC OUTPUT VOLTAGE[V] * t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 CURRENT[A] SPECIFICATIONS MODEL SUCW3052 SUCW3055 SUCW322 SUCW325 SUCW3242 SUCW3245 SUCW3482 SUCW3485 VOLTAGE[V] DC4.5-9 DC9-8 DC8-36 DC36-6 INPUT CURRENT[A] * typ 0.8typ 0.343typ 0.329typ 0.2typ 0.65typ 0.086typ 0.083typ EFFICIENCY[%] *2 4typ 4typ 6typ 6typ 6typ 6typ 6typ 6typ VOLTAGE[V] t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) CURRENT[A] LINE REGULATION[mV] 60max 5max 60max 5max 60max 5max 60max 5max LOAD REGULATION[mV] 600max 50max 600max 50max 600max 50max 600max 50max RIPPLE[mVp-p] -20 to +55C *3 20max 20max 20max 20max 20max 20max 20max 20max -40 to -20C *3 50max 50max 50max 50max 50max 50max 50max 50max OUTPUT RIPPLE NOISE[mVp-p] -20 to +55C *3 50max 50max 50max 50max 50max 50max 50max 50max -40 to -20C *3 200max 200max 200max 200max 200max 200max 200max 200max TEMPERATURE REGULATION[mV] -20 to +55C 50max 80max 50max 80max 50max 80max 50max 80max -40 to +55C 240max 290max 240max 290max 240max 290max 240max 290max DRIFT[mV] *4 50max 60max 50max 60max 50max 60max 50max 60max START-UP TIME[ms] 20max (Minimum input, Io=00%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed ( pin open) t5% adjustable by external VR OUTPUT VOLTAGE SETTING[V] (t5%) PROTECTION OVEURRENT PROTECTION Works over 05% of rating and recovers automatically CIUIT AND OTHERS REMOTE ON/OFF Provided (Negative logic L: ON, H : OFF) INPUT-OUTPUT ISOLATION INPUT-CASE OUTPUT-CASE ENVIRONMENT SAFETY OTHERS SU.SUC/SUT-28. OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD -40 to +85C, 20-95%RH (Non condensing) (Required Derating), 3,000m (0,000feet) max -40 to +00C, 20-95%RH (Non condensing), 9,000m (30,000feet) max 0-55Hz, 98.0m/s 2 (0G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s 2 (50G), ms, once each along X, Y and Z axis UL60950-, C-UL, EN X.0X6.mm [0.98X0.28X0.63 inches] (WXHXD) / 5g max Convection/Forced air * Output pins can be connected in series to make a 24V/30V output. *2 Rated input 5V, 2V, 24V or 48V DC Io=00% *3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * Parallel operation with other model is not possible.
4 SUCW3 External view.62 ±0.2.SMD(type B) 0.6 ±0. 0.±0.4 Pin terminal part details.8 ±0.3 (0-0 ) Coplanarity within min 25 [0.98] ±0.6 [.03] Adsorption area 5.5 [0.6] 6. [0.63] [0.6] [0.6].62 ±0.2 0.min Recommended Pad and Hole dia. (TOP VIEW) type B.4 type C [0.08] 3.2 [0.3] 2.6 [0.3] [.09] º.6 -º0.9 Unit : 0.inch Dimensions in mm, [ ]=inches.62 ± ±0. 2.DIP(type C) 3.68±0.25 [0.4] 25 [0.98] 5.5 [0.6] 6. [0.63] 0.min ±0.2 Tolerance ±0.5 [±0.02] Dimensions in mm, [ ]=inches Pin terminal thickness : 0.3±0. Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.2±0.05 [0.008] Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Weight : 5g max [0.9] 3.84 SU.SUC/SUT-29.
5 DC-DC Converters PCB Mount Type SUCW6 Ordering information SUC W B P -O R Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP Packing form Blank:Plastic cover P :Tray (SMD type) 8Optional G :Capacitor between Input and Output is removed. C :with coating (only DIP type)* * Safety standards are pending MODEL SUCW6052 SUCW6055 SUCW622 SUCW625 SUCW6242 SUCW6245 SUCW6482 SUCW6485 MAX OUTPUT WATTAGE[W] DC OUTPUT VOLTAGE[V] * t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 CURRENT[A] SPECIFICATIONS MODEL SUCW6052 SUCW6055 SUCW622 SUCW625 SUCW6242 SUCW6245 SUCW6482 SUCW6485 VOLTAGE[V] DC4.5-9 DC9-8 DC8-36 DC36-6 INPUT CURRENT[A] *2.538typ.538typ 0.588typ 0.588typ 0.29typ 0.29typ 0.45typ 0.45typ EFFICIENCY[%] *2 8typ 8typ 85typ 85typ 86typ 86typ 86typ 86typ VOLTAGE[V] t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) CURRENT[A] LINE REGULATION[mV] 60max 5max 60max 5max 60max 5max 60max 5max LOAD REGULATION[mV] 600max 50max 600max 50max 600max 50max 600max 50max RIPPLE[mVp-p] -20 to +55C *3 20max 20max 20max 20max 20max 20max 20max 20max -40 to -20C *3 50max 50max 50max 50max 50max 50max 50max 50max OUTPUT RIPPLE NOISE[mVp-p] -20 to +55C *3 50max 50max 50max 50max 50max 50max 50max 50max -40 to -20C *3 200max 200max 200max 200max 200max 200max 200max 200max TEMPERATURE REGULATION[mV] -20 to +55C 50max 80max 50max 80max 50max 80max 50max 80max -40 to +55C 240max 290max 240max 290max 240max 290max 240max 290max DRIFT[mV] *4 50max 60max 50max 60max 50max 60max 50max 60max START-UP TIME[ms] 20max (Minimum input, Io=00%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed ( pin open) t5% adjustable by external VR OUTPUT VOLTAGE SETTING[V] (t5%) PROTECTION OVEURRENT PROTECTION Works over 05% of rating and recovers automatically CIUIT AND OTHERS REMOTE ON/OFF Provided (Negative logic L: ON, H : OFF) INPUT-OUTPUT ISOLATION INPUT-CASE OUTPUT-CASE ENVIRONMENT SAFETY OTHERS SU.SUC/SUT-30. OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD -40 to +85C, 20-95%RH (Non condensing) (Required Derating), 3,000m (0,000feet) max -40 to +00C, 20-95%RH (Non condensing), 9,000m (30,000feet) max 0-55Hz, 98.0m/s 2 (0G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s 2 (50G), ms, once each along X, Y and Z axis UL60950-, C-UL, EN X.0X9.mm [.28X0.28X0.5 inches] (WXHXD) / g max Convection/Forced air * Output pins can be connected in series to make a 24V/30V output. *2 Rated input 5V, 2V, 24V or 48V DC Io=00% *3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * Parallel operation with other model is not possible.
6 SUCW6 External view.smd(type B) Adsorption area Recommended Pad and Hole dia. (TOP VIEW) type B 2. ± ± [.28] 0.± [0.3] 9. 0.min ±0.2 2.±0.2 [0.2] [0.2] [0.3] [0.08] [0.3] [.39] type C Pin terminal part details.8 ±0.3 (0-0 ) 0.8min Coplanarity within ±0.6 [.33] 2.95 [0.2] -f0.9 f.6 Unit : 0.inch Dimensions in mm, [ ]=inches 2.± ± ±0.25 [0.4] 2.DIP(type C) 8.6 [0.3] min [.28] 5.08±0.2 [0.2] 2. ± [0.] Tolerance ±0.5 [±0.02] Dimensions in mm, [ ]=inches Pin terminal thickness : 0.3±0. Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.2±0.05 [0.008] Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Weight : g max [.2] 2.85 [0.] SU.SUC/SUT-3.
7 DC-DC Converters PCB Mount Type SUCW0 Ordering information SUC W B P -O R Series name 2Dual output 3Output wattage 4Input voltage 5Output voltage 6Mounting type B :SMD C :DIP Packing form Blank:Plastic cover P :Tray(SMD type) 8Optional G :Capacitor between Input and Output is removed. C :with coating (only DIP type)* * Safety standards are pending MODEL SUCW0052 SUCW0055 SUCW022 SUCW025 SUCW0242 SUCW0245 SUCW0482 SUCW0485 MAX OUTPUT WATTAGE[W] DC OUTPUT VOLTAGE[V] * t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 t2 or +24 t5 or +30 CURRENT[A] SPECIFICATIONS MODEL SUCW0052 SUCW0055 SUCW022 SUCW025 SUCW0242 SUCW0245 SUCW0482 SUCW0485 VOLTAGE[V] DC4.5-9 DC9-8 DC8-36 DC36-6 INPUT CURRENT[A] *2 2.5typ 2.44typ.05typ.02typ 0.523typ 0.509typ 0.262typ 0.254typ EFFICIENCY[%] *2 86typ 86typ 86typ 86typ 86typ 86typ 86typ 86typ VOLTAGE[V] t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) t2(+24) t5(+30) CURRENT[A] LINE REGULATION[mV] 60max 5max 60max 5max 60max 5max 60max 5max LOAD REGULATION[mV] 600max 50max 600max 50max 600max 50max 600max 50max RIPPLE[mVp-p] -20 to +55C *3 20max 20max 20max 20max 20max 20max 20max 20max -40 to -20C *3 50max 50max 50max 50max 50max 50max 50max 50max OUTPUT RIPPLE NOISE[mVp-p] -20 to +55C *3 50max 50max 50max 50max 50max 50max 50max 50max -40 to -20C *3 200max 200max 200max 200max 200max 200max 200max 200max TEMPERATURE REGULATION[mV] -20 to +55C 50max 80max 50max 80max 50max 80max 50max 80max -40 to +55C 240max 290max 240max 290max 240max 290max 240max 290max DRIFT[mV] *4 50max 60max 50max 60max 50max 60max 50max 60max START-UP TIME[ms] 20max (Minimum input, Io=00%) OUTPUT VOLTAGE ADJUSTMENT RANGE Fixed ( pin open) t5% adjustable by external VR OUTPUT VOLTAGE SETTING[V] (t5%) PROTECTION OVEURRENT PROTECTION Works over 05% of rating and recovers automatically CIUIT AND OTHERS REMOTE ON/OFF Provided (Negative logic L: ON, H : OFF) INPUT-OUTPUT ISOLATION INPUT-CASE OUTPUT-CASE ENVIRONMENT SAFETY OTHERS SU.SUC/SUT-32. OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD -40 to +85C, 20-95%RH (Non condensing) (Required Derating), 3,000m (0,000feet) max -40 to +00C, 20-95%RH (Non condensing), 9,000m (30,000feet) max 0-55Hz, 98.0m/s 2 (0G), 3minutes period, 60minutes each along X, Y and Z axis 490.3m/s 2 (50G), ms, once each along X, Y and Z axis UL60950-, C-UL, EN X.0X22.0mm [.58X0.28X0.8 inches] (WXHXD) / 0g max Convection/Forced air * Output pins can be connected in series to make a 24V/30V output. *2 Rated input 5V, 2V, 24V or 48V DC Io=00% *3 Ripple and Ripple Noise is measured by using measuring board with capacitor with in 25mm from output pin terminals. *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C. * Parallel operation with other model is not possible.
8 SUCW0 External view.smd(type B) Adsorption area Compornent area Recommended Pad and Hole dia. (TOP VIEW) type B 5.24 ±0.2 [0.6] Pin terminal part details 0.6 ± [.58] 2.5 [0.85] 22 [0.8] 0.±0.4 0.min 0.min ± [0.2] 5.24 ±0.2 [0.6] [0.08] 3.2 [0.3] 43 [0.3] [.69] type C.8±0.3 (0-0 ) 0.8min.2 4.4±0.6 [.63] 3.3 [0.2] Coplanarity within 0. -f0.9 f.6 Unit : 0.inch Dimensions in mm, [ ]=inches 5.24±0.2 [0.6] 0.6 ±0. 2.DIP(type C) 3.68±0.25 [0.4] 40.2 [.58] 2.5 [0.85] 22 [0.8] Compornent area.62 ± ±0.2 [0.6] 3.03 [0.2] Tolerance ±0.5 [±0.02] Dimensions in mm, [ ]=inches Pin terminal thickness : 0.3±0. Pin terminal material : Copper alloy Plating treatment of terminal : Lead free plating Case thickness : 0.2±0.05 [0.008] Case material : Brass Plating treatment of case : Nickel plating Please keep enough creepage distance with the pattern on PCB and other components. Weight : 0g max S [0.2] [.5] SU.SUC/SUT-33.
MODEL LEP100F-24 LEP100F-36 LEP100F-48 DC OUTPUT +24V 4.2(Peak 7)A +36V 2.8(Peak 4.7)A +48V 2.1(Peak 3.5)A
AC-DC Power Supplies Open Frame/ Enclosed type 00F Ordering information 00 F -2 -O 2 3 R Recommended EMI/EMC Filter NAC-06-72 High voltage pulse noise type : NAP series Low leakage current type : NAM series
More informationMODEL MMC8A-1 MMC8A-2 MMC8A-3 V1 +5V 1.2A +5V 1.1A +5V 1.2A DC OUTPUT V2 +12V 0.1A +15V 0.1A +12V 0.1A V3-12V 0.1A -15V 0.1A -5V 0.
Unit type 8A Ordering information 8A -1 -O 1 2 3 4 R 1Series name 2Output wattage 3Output voltage combination 4Optional G :Low leakage current N :with Cover MODEL 8A-1 8A-2 8A-3 V1 +5V 1.2A +5V 1.1A +5V
More informationMODEL TUNS50F05 TUNS50F12 TUNS50F24 VOLTAGE[V]
AC-DC Power Supplies Bus Converter. Power Module Type 50F Ordering information TUN S 50 F 05 -O 1 2 3 5 6 * Providing heat sink as option 1 Series name 2 Single output 3 Output wattage Universal Input
More information<Designed to meet harmonic current regulations> Board type, ultra-small size, and low cost
SERIES Board type, ultra-small size, and low cost Ordering Information Switching power supplies General Description 2. Allowable Input Voltage Range AC85
More information5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]
R AC-DC Power Supplies Configurable type series Ordering information ACO - OOOOOO- OO- OO 6 7 8 9 Recommended EMI/EMC Filter F AC-6-7 F AC--7 6F AC--7 9F AC--7 High voltage pulse noise type : AP series
More information5.7typ. CURRENT[A] 5.7typ. 15 / 50typ [A] 75typ. 77typ 78typ. 80typ LEAKAGE CURRENT[mA]
Recommended EMI/EMC Filter ACEF AC-6-7 ACEF AC--7 ACE6F AC--7 ACE9F AC--7 High voltage pulse noise type : AP series ow leakage current type : AM series *The EMI/EMC Filter is recommended *to connect with
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationSeries AM5T-Z 5 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single Output FEATURES: RoHS compliant Operating temperature -40 o C to + 85 o C 24 Pin DIP Package Input / Output isolation 1500 and 3500VDC High
More information(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
More informationOutput Current. Output Unit. Feature Set i 6A A 033 V R TDK- Lambda Dallas Technical Center. 14 Amps 3.3V Single
Ordering information Product Identifier Platform Input Voltage Current Unit Range # of Feature Set i 6A 24 014 A 033 V 001 -R TDK- Lambda Dallas Technical Center Option Table Feature Set 33.0 x 22.9mm
More informationS24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
More information(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
More information(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationPG02S Series 2W DC/DC CONVERTER, SIP-Package
PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86 x 0.37 inch) Wide 2:1 Input Range Operating Temperature
More informationDH50 SERIES. DATASHEET Rev. A
DATASHEET DH50 SERIES 2:1 Wide Input Voltage Ranges Single Outputs, Efficiency up to 92% 2.0 x 1.0 x 0.4 Encapsulated Shielded Metal Package FEATURES RoHS & UL 94V-0 Compliant 50 Watts Output Power 2:1
More informationSmall Type High-Speed Response POL DC-DC Converter BSV-nano Series
is a small (xxmm), light, 4A output step-down DC-DC converter with low output voltage from 08V and an accuracy of ±% typ It can support the latest DSP, ASIC applications High efficiency and high-speed
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
More informationEfficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
More informationUL Certified RP30-FW
Features 4:1 Wide Input Voltage Range 30 Watts Output Power 1.kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x25.4x10.2mm Package Efficiency to 91% POWERLINE
More informationRWS50B RWS100B RWS150B RWS300B RWS600B
RWS-B Series 50W to 600W Single Output General Purpose Power Supplies Features 10 Year e-cap Lifetime 7 Year Warranty Global Safety Approvals Compact Size Better Field Reliability Lower Cost of Ownership
More informationDC9~ typ max 40max 80max. 71 typ max. 120max 120max. 120max. 120max. 60max. 48max. 20max
ZU SERIES DC/DC CONVERTER ZUS1R R Thin profile Isolated between input-output Built-in overcurrent protection circuit UL recognized, TÜV approved, CSA certified Five-year warranty ORDERING INFORMATION ZUS1R120
More informationOutput Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationVDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationSH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
More informationTDK-Lambda ZWS300BAF/A
ZWS3BAF/A SPECIFICATIONS A254-1-1/A-B MODEL ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ZWS3BAF ITEMS -12/A -15/A -24/A -36/A -48/A 1 Nominal Output Voltage V 12 15 24 36 48 2 Maximum Output Current A 25.. 12.5 8.4
More information2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
More informationSPECIFICATION FSP350-60APN(85) Bronze. (Erp2013) DATE:MAY, 14, 2013 表單編號 :7000P Page1
SPECIFICATION FSP350-60APN(85) Bronze (Erp2013) DATE:MAY, 14, 2013 REV:2 表單編號 :7000P-0105 Page1 TABLE OF CONTENTS PAGE 1. GENERAL REQUIREMENTS 3 2. INPUT REQUIREMENTS 3 3. OUTPUT REQUIREMENTS 3 3.1 Output
More informationTable 2 Models BST12M-0.7S03PDM BST12M-0.7S06PDM BST12M-0.7S10PDM Conditions Input voltage range
Information The BSTM series is a small, thin, highly efficient and low noise non-isolated type step down DC-DC converter with input that has been developed for distributed feeding. Output voltage is adjustable
More informationBasic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method * Refer to Specification. * Refer to. Switching frequency [khz] Input current Rated input fuse Inrush current protection Material
More informationBasic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method * Refer to Specification. * Refer to. Switching frequency [khz] Input current Rated input fuse Inrush current protection Material
More information4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
More informationApplication Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
More informationFeatures. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections DC/DC Converter Description The is a switching regulator with a wide input voltage range,
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
More informationOutput Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
More informationTRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
More informationFeatures. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
More informationHALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1 Wide Input Voltage Range
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED60-48 S 05 W - M3 N HC Series Name Input Output Output Input Operating Temp. Remote
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Ultra Wide Input Ranges (936Vdc, 2060Vdc) 4 Efficiency 85% (typ.) 4 Independently Isolated Outputs 4 SixSided Shielded Case 4 Remote On/Off Control 4 Continuous
More informationUltra small size adjustable output type high voltage power supply 2W to 2.6W high voltage DC-DC converter 0V-470V 1000V 1500V 2000V MHV Series
Ultra small size adjustable output type high power supply W to.w high DC-DC converter 0V-0V 000V 500V 000V Series The series is the first high product supply in the industry to use the latest SMT (surface
More informationRP40- _FR/ Package (4) CTRL Logic (3)
Features Regulated Converters Description Wide 4:1 Input Voltage Range 1.6kVDC Isolation for 24Vin and 48Vin, 3kVDC Isolation for 1Vin Efficiency up to 92% Six-Sided Continuous Shield UL695-1 AM2 Certified,
More informationHAE S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option Voltage Quantity Voltage Pin Options
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option
More informationOutput Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
More informationRCD15W Series PART NUMBER STRUCTURE
DC/DC Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RCD15-48 S 05 W - M3 A HC Series Name Input Output Output Input Operating Temp.
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series DC/DC
More informationHALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 150 WATT RAILWAY APPLICATIONS HWB150 SERIES
DATA DATA SHEET SHEET HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 15 WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1
More informationAmerican Power Design, Inc.
FEATURES 4 Customer Selects Output Voltage 4 Outputs to 200 Vdc 4 Low Profile 4 High Regulation 4 Ultra Wide Input Ranges (9-36Vdc, 20-60Vdc, 36-72Vdc) 4 1000 Vdc Output Isolation 4 Continuous Short Circuit
More informationSELV IP30 (CCC optional)
Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP30 level, optional IP67 rating Typical
More informationBasic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model 1F 15F Circuit method Active filter Forward converter Active filter Forward converter Switching frequency [khz] 8 12 8 13 Input current *2 [A]
More informationHAE S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly Option Voltage Quantity Voltage Range Pin Options
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly
More informationPXF Series. PXF Series 1. Key Market Segments & Applications. PXF Features and Benefits. Single, Dual, Triple Output 40W & 60W DC-DC Converters
Industry Standard 2 x 2 Footprint Six Sided Shielding Agency Approved 12, 24 and 48V Inputs 4:1 Wide Range Input Models Single, Dual, Triple Output 40W & 60W DC-DC Converters Key Market Segments & Applications
More informationTDK-Lambda ZWS240BP/A SPECIFICATIONS
SPECIFICATIONS A253-1-1/A-B MODEL ZWS24BP ZWS24BP ZWS24BP ITEMS -24/A -36/A -48/A 1 Nominal Output Voltage V 24 36 48 2 Average Output Current A 1 6.7 5. 3 Peak Output Current (*1) A 2. 13.4 1. 4 Average
More informationDC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
More informationIS 15885(Part 2/Sec13) R ( for 24V only)
THOMAS SAMUEL THOMAS SAMUEL Bauar t gepruft Sicherheit egel ma ge od o s be wac g W Constant Voltage + Constant Current LED Driver 110 M IP67 Features Constant Voltage + Constant Current mode output Plastic
More informationD R C- 4 0 s e r i e s
LPS Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 Features Universal AC input / Full range Protections: Short circuit / Overload / Over voltage Battery low protection /
More informationSorensen XG Series / XTR Series W A. 850 W, 1U Half Rack Programmable DC Power Supplies V
Sorensen XG Series / XTR Series 670 850 W 850 W, 1U Half Rack Programmable DC Power Supplies 6 600 V Highest Power Density Comprehensive Digital and Analog Interface Options Scalable, Multi-Unit Design
More informationC B. Operating up to 5000m altitude 5 year product warranty Models
DC/DC Converter Wide 2:1 input voltage 6 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
More informationSorensen XG 1700 Series 1700 W A Watt, 1U Programmable DC Power Supplies V. Key Features. Key Modes
Sorensen XG 1700 Series 1700 W 1700 Watt, 1U Programmable DC Power Supplies 6 600 V Industry Leading Power Density Up to 1700 Watts in 1U Standard Digital Interfaces USB&RS232/485 LXI Ethernet and Isolated
More informationS24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
More informationHAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE HAE100-48 S 05 - P TH HS Series Name Input Output Output Ctrl and Through hole Assembly
More informationECP180 Series. Low 1 Profile. High Power Density. 2.0 by 4.0 Footprint. 120W Convection-cooled Rating. 180W Force Cooled Rating
ECP180 Series Low 1 Profile High Power Density 2.0 by 4.0 Footprint 120W Convection-cooled Rating 180W Force Cooled Rating Medical & ITE pprovals Class I and Class II pplications High Efficiency, up to
More informationVideo & Power Over Coax Kit
VPoC User Manual Video & Power Over Coax Kit 1CH Video Power over Coax w/ 12V DC Receiver Device VPoC24DC-01K VPoC24DC-01 N-42-1 x1 N-41C 4CH / 8CH / 16CH Video Power over Coax Server Kit VPoC24DC-04K
More informationTC-500PD8. Switching Power Supply ( PS2 A T X 500W 8 0+ ) SPECIFICATION. Revision: 2.0
TC-500PD8 TC-500PD8 Switching Power Supply ( PS2 A T X 500W 8 0+ ) SPECIFICATION Revision: 2.0 727,. Phillips Drive City of Industry. CA 91748. USA http:// www.xeal.com.tw TEL: 626-303-8885 FAX: 626-301-0588
More informationEfficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FDC10-48 S 05 W - M2 P HC Series Name Input Output Output Input Operating Temp. Remote
More informationLow Profile DC Power Supply with Zero Voltage Soft Switching
Sorensen XFR Series Low Profile DC Power Supply with Zero Voltage Soft Switching Analog programming Zero voltage soft switching Constant voltage or constant current operation with automatic crossover and
More informationEB Series Eighth - Brick Up to 100 Watt DC-DC Converter
FEATURES DOSA Standard Form, Fit & Function Industry standard 1/8th brick footprint 4:1 input voltage range: 9-36 or 18 75Vin ROHS II Directive 2011/65/EU Compliant No minimum load required -40 0 C to
More information(DC/DC) SERIES to 96.5% (typical) Product Lineup. Ordering Information. Features. General Description. Super high efficiency
SERIES (DC/DC) "TESLA Converter" (next-generation power supply) adopted : ultra small size and super high efficiency.chassis module/open-frame type Super high efficiency 94.5 to 96.5% (typical) Ordering
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationSixteenth brick format 4:1 input voltage range 2.25kV basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 91%
Features Regulated Converter Description Sixteenth brick format : input voltage range.kv basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 9% The RPAS is a low cost
More information881WP. Type List. Ordering Information 881 WP1-1A C - - C Basic series designation 4. C -- Contact material AgNi
Type List Terminal style WP (High power type, terminals)-.0mm pitch Contact form A (SPNO) Features Low Profile mm w/ fasten terminals. High Rating 7A 277VAC. High temperature withstand up to 2. UL/CUL
More informationPOWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
More informationUnit/Comments. %; Equal Output Loads %; Equal Output Loads Full Load
100 series Single, Dual, Triple Output DC/DC Converter DESCRIPTIONS FEATURES Synchronization 13.3W/In 3 Power Density Efficiency to 87% UL 190 Approved VDE / EN 90 Approved >700,000 Hours MTBF 6 sided
More informationTL RELAYS. TYPICAL APPLICATIONS Head lamp, Fog lamp, Fan motor, etc. ORDERING INFORMATION TYPES. High Load Relay for Smart Junction Box ACTL.
High Load Relay for Smart Junction Box TL RELAYS High heat-resistant type: Sealed Pin in Paste compliant type: Flux tight New 14.4.7 11.433 1.3 FEATURES Large capacity switching
More informationHAE S 05 W - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE HAE100-48 S 05 W - P TH HS Series Name Input Output Output Input Ctrl and Through hole
More informationLS200 Series Instruction Manual
LS200 Series Instruction Manual BEFORE USING THE POWER SUPPLY UNIT Pay attention to all warnings and cautions before using the unit. Incorrect usage may lead to an electrical shock, damage to the unit
More informationISOLATED DC-DC Converter EC2SB SERIES APPLICATION NOTE
ISOLATED DC-DC Converter EC2SB SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Written By Enoch Danny/ Tim Joyce Research and Development Department Jacky Jack Benny Quality Assurance
More informationSST-ST75F-ESS The essential silver standard
STRIDER ESSENTIAL SERIES SST-ST75F-ESS The essential silver standard High efficiency with 80 PLUS Silver certification 24/7 continuous power output with 40 operating temperature Class-leading single +12V
More informationLPF-25 series. 25W Constant Voltage + Constant Current LED Driver
F 110 M M SELV IP67 Features Constant Voltage + Constant Current mode output Plastic housing with Class II design Built-in active PFC function Class 2 power unit Fully encapsulated with IP67 level Typical
More informationDelphi Series V48SH, 1/16 th Brick 100W DC/DC Power Modules: 48V in, 1.8V, 30A out
Delphi Series V48SH, 1/16 th Brick 1W DC/DC Power Modules: 48V in, 1.8V, 3A out The Delphi Series V48SH, 1/16 th Brick, 48V input, single output, isolated DC/DC converter, is the latest offering from a
More informationSPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SINGLE ROW DOUBLE ROW SLC
More informationRPR40. Features ICE Technology* POWERLINE+ 40 Watt Single & Dual Output. Railway-Converter with 3 year Warranty
Features ICE Technology* Description Tx Temperature Range without Derating 120 C Maximum Case Temperature -45 C Minimum Operating Temperature EN 50155 Compliant EN 50121-3-2 Compliant CE Marked 24, 48
More informationBasic Characteristics Data
Basic Characteristics Data Basic Characteristics Data Model Circuit method Switching frequency [khz] (reference) Input current [A] Inrush current protection PCB/Pattern *3 Material Single sided Double
More informationDC/DC Converter URA(B)_LD-15WR2 & URA(B)_LD-20WR2 Series
DC/DC Converter FEATURES 15W&20W,Ultra wide input isolated & regulated dual / single output DC/DC converter Patent Protection RoHS Wide range of input voltage (4:1) Efficiency up to 90% Isolation voltage
More informationTDK Corporation Power Systems Business Group
MESSRS : PRODUCT SPECIFICATIONS CUSTOMER'S PRODUCT NAME : TDK PRODUCT NAME : DC-DC CONVERTER UNIT CC6-xxxxxR-E Series TDK Corporation Power Systems Business Group DWG.No. TRSA-0287-3 Revised 06/12/01 1.
More informationEVS Series. 300 and 600W Constant Current Power Supplies. EVS Series 1. Specification
EVS Series www.emea.tdk-lambda.com/evs 300 and 600W Constant Current Power Supplies Features Benefits 300W Convection cooled and 600W fan model Silent fanless chargers CC (constant current) mode Quick
More informationDEWS SERIES 25W-30W WIDE INPUT RANGE
DEWS SERIES 25W-30W WIDE INPUT RANGE FEATURES 25-30 WATTS OUTPUT POWER ULTRA COMPACT SIZE:1.0 x1.0 x0.52 INDUSTRY STANDARD PACKAGE 9V-18V,18V-36V,36V-75V WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY
More informationNote1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
More informationNo. Test Requirement Test Condition Test Reference. 10 cycles
*RoHS COMPLIANT & **HALOGEN FREE SinglFuse SF-1210SxxxW Series Features n Single blow fuse for overcurrent protection n 3225 (EIA 1210) footprint n Slow blow fuse n UL 248-14 listed n RoHS compliant* and
More informationThe 3 kw Models will accept 200*/230 VAC single phase and 200*/208 VAC three phase input power.
Sorensen DLM 3 & 4 kw Series DC Power Supply High Power Density : 3 kw and 4 kw models, 2U (3½ high), (19 wide); no top or bottom clearance spacing required Preview Push-button : Overvoltage protection
More informationDIN Rail Power Supplies
DIN Rail Power Supplies Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced
More informationEfficiency(1) Max. Capacitive. Package(3) CTRL Logic(2) Single
4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to % No minimum load required EN5155 certified IEC/EN95-1 certified Features Regulated
More information3-Phase Military AC-DC Power Supply 3-Phase, VrmsL-L
-4-1U 3-Phase Military AC-DC Power Supply 3-Phase, 8-265 VrmsL-L 47-8 Hz Semi-Regulated 28 V-48 V 4 W 525 W Transient Input Power Input Frequency Output Voltages Output Power Sealed Construction, Ultra
More informationRS5/RD5-R10/RD10. RoHS. 1.0W Regulated Single & Dual Output
1.0W Regulated RS5/RD5-R10/RD10 8 Pin SIL/ 16Pin DIL Package Wide 2:1 Input Range 1000VDC Isolation Up to 3000VDC Isolation Continuous Short Circuit Protection Efficiency up to 77% Operating Temperature
More information