MEMBER. Try our new toll-free Consumer Information Number: DYNABRADE

Size: px
Start display at page:

Download "MEMBER. Try our new toll-free Consumer Information Number: DYNABRADE"

Transcription

1 Reorder No. A03.01

2 2 DYNABRADE FULL ONE-YEAR WARRANTY Following the reasonable assumption that any inherent defect which might prevail in a product will become apparent to the user within one year from the date of purchase, all equipment of our manufacture is warranted against defects in workmanship and materials under normal use and service. Any product appearing to be defective must be returned to Dynabrade, freight prepaid, for our inspection. We shall repair or replace at our factory, any equipment or part thereof which shall, within one year after delivery to the original purchaser, indicate upon our examination to have been defective. Our obligation is contingent upon proper use of Dynabrade tools in accordance with factory recommendations, instructions and safety practices. It shall not apply to equipment which has been subject to misuse, negligence, accident or tampering in any way so as to affect its normal performance. Normally wearable parts such as bearings, rotor blades, etc., are not covered under this warranty. All Dynabrade tools must be used with a filterregulator-lubricator to maintain all warranties. AUTOBRADE RED 6-MONTH WARRANTY Autobrade Red tools are made to Dynabrade specifications. These competitively-positioned tools are warranted for 6 months from the date of purchase against defects in workmanship and materials under normal use and service. We shall at our option, repair or replace at our factory, any tool which shall, within 6 months after delivery to the original purchaser, indicate upon our examination to have been defective. Our obligation is contingent upon proper use of Autobrade Red tools in accordance with factory recommendations, instructions and safety practices such as noted in Dynabrade s warranty. The warranty shall not apply in these cases: Normally wearable parts such as bearings, rotor blades, etc. Consumables such as sanding pads, etc. Misuse or neglect in maintaining tool or tool modification. Lack of lubrication or evidence of rust, dirt, or corrosion. Tools requiring normal tune-up or cleaning. Tools being used after they are badly worn such as using our ratchets with worn yoke. Ratchet anvils damaged by excessive hand torquing. Use in production-type applications. TOOL MAINTENANCE IS IMPORTANT Air tools do require maintenance to keep them running in tip-top shape. Problems can occur if maintenance is not performed. Moisture can gather in air lines and be blown into air tools during use. Motor lubrication is necessary. Greater performance and longevity of air tools can be expected with the use of a filter-regulator-lubricator. A clean, dry, air source and proper lubrication with a good-grade non-detergent oil (such as Dynabrade Air Lube) is a preventative measure that will go a long way and potentially save on costly repairs. Run Dynabrade air tools at 90 PSI or less, unless otherwise specified. Running the tools at higher pressures can be the cause of unnecessary premature wear and can contribute to an unsafe condition. CUSTOMER SERVICE Dynabrade s customer service staff has one very important job to make sure that you are completely satisfied with your order. Our service department is staffed with highly-trained people, ready to serve you in any way they can, from technical advice and order taking to rush shipments. DYNABRADE TOOLS MEET THE FOLLOWING HIGH QUALITY STANDARDS Ergonomics and operator comfort have worked their way into each Dynabrade air tool design. Factors including Vacuum, Vibration, Insulation and Sound (VVIS) are addressed at every integral design stage. VVIS is now critical to our research and development of new products as we continue to meet the needs of the marketplace. VACUUM Airborne sanding particles can cause severe inflammation of the eyes and lung tissue, varying on the degree of exposure and the type of airborne contaminants involved. It is because of this danger that Dynabrade manufactures self-generated and central vacuum tools that direct airborne particles away from the operator, air motor and work surfaces. VIBRATION All hand-held machines transmit vibration to an operator s hand while in operation. Operators that work with vibrating machines for extended periods of time risk many different types of injury. The main types of injuries that are likely to occur are vascular injury, nerve injury, skeletal injury and joint injury. To help reduce vibration, we have built features into our tools that include composite housings, rubber overmolds and insulated handles. INSULATION Cold caused by pneumatic-powered tools can cause a variety of work-related injuries. Dynabrade manufactures a variety of tools with thermal-insulated housings to reduce cold air transmission to the operator, reducing the risk of whitefinger disease and other injury-related symptoms. SOUND High sound levels over an extended period of time can damage hearing. New enhancements to muffling systems, exhaust protection and other tool design factors further reduce tool sound levels in the workplace. For More Information or Pricing, Contact Your Local Dynabrade Jobber/Warehouse. CALL/FAX OUR CUSTOMER SERVICE HOTLINE: USA CANADA Phone: Phone: Fax: Fax: Try our new toll-free Consumer Information Number: DYNABRADE ( ) MEMBER

3 3 RANDOM ORBITAL SANDERS Page Palm-Style Dynorbital-Spirit Dynorbital-Spirit Sanding Pads/Accessories Two-Hand Dynorbital Supreme... 8 MUD HOG SANDERS... 9 DYNABUG MODEL T SANDERS WET SANDERS Dynabug Model T Random Orbitals COMBINATION RANDOM ORBITAL/DISC SANDER BOARD SANDERS 8" Dynaline In-Line " Dynaline In-Line Dynabug Orbital Jitterbug DETAILING TOOLS Dynorbital Supreme Scrubber Palm-Style Buffers/Mini-Dynorbital Sanders Right Angle Mini-Buffers/Mini-Dynorbital Sander Dyna-Step Spot Repair System Dynafine Detail Sander Dynafine Finger Sander ELECTRIC TOOLS Page Dynafile II Belt Machine " Disc Sander /2" - 5" Depressed Center Wheel Grinder/Sander Dynorbital Supreme Random Orbital Sander AUTOBRADE RED VALUE TOOL LINE Dynazip Surface Preparation Tool Dynazip-Eraser Decal Removal Tool Disc Sanders Buffers Die Grinders Cut-Off Tools Belt Tool Sanding Star Kit Impact Wrenches Ratchets Router Scribe ACCESSORIES Interface Pads, Pad Conversion Sheets Ported Plugs and Couplers Dynaswivel Air Line Connectors Air Tool Accessories (Burrs, Lube, Blow Guns, F-R-L s) Portable Vacuum Systems Downdraft Sanding Tables Vacuum Hoses, Cuffs and Air Line Accessories Specialty Back-Up Pads and Accessories HEAVY DUTY TOOLS Right Angle Buffers Disc Sanders Die Grinders Cut-Off Tools Mini-Dynafile II Belt Machine ABRASIVES DISPLAY PACKS AND WEARABLES NUMERICAL INDEX OF TOOLS

4 4 LESS VIBRATION Composite base has integrated full-rubber over-mold creating a non-slip insulated feel. PERFECTLY BALANCED PAD The Best in the Industry! Perfectly-balanced weightmated pad: the ultimate in swirl-free finishes! 3-1/2" 80 grams 5" 100 grams 6" 130 grams ERGONOMIC GRIP The shape of the housing conforms to operator s hand for proper wrist position required for greater operator comfort and control. COMPOSITE LEVER Insulates cold. When the palm-conformed lever is activated, it becomes recessed into the housing thus eliminating a pinch point on the sensitive area of the palm. LOW SOUND LEVELS New muffling system reduces sound levels to as low as 75 db(a). Easy to replace muffler inserts. ONE-PIECE SPEED CONTROL DIAL Standard on all models. Adjustable side dial maintains user desired speed: variable 4,000-12,000 RPM. DOUBLE ROW BALANCER BEARING New and innovative bearing seals protect high-quality bearings from sanding residue and reduce bearing temperature for longer bearing life. CUSTOM-ENGINEERED CYLINDER Custom-engineered, high-strength cylinder provides longer life for less maintenance. LIP-SEAL SHROUD Correct spacing between shroud and pad allows for the most efficient operation of the tool on the work surface. Protects operator from moving sanding pad and enhances dust collection on vacuum models. Patented with patents pending. THREE ORBITS TO CHOOSE FROM NEW! EASILY REPLACEABLE DROP-IN MOTOR Less repair tools needed to repair and maintain the tool. Quick in-house repair lessens downtime. Average repair time now less than five minutes. 3/32" Diameter Orbit for ultra-fine sanding. 3/16" Diameter Orbit for general sanding. 3/8" Diameter Orbit for aggressive sanding. COLOR-CODED LEVERS IDENTIFY ORBIT SIZE MORE POWER Black Lever 3/32" dia. orbit models. Easy to Identify! Grey Lever 3/16" dia. orbit models. Blue Lever 3/8" dia. orbit models. True 12,000 RPM air motor has more power. Merlite III floating rotor utilizes five blades producing more usable power (.25 Hp). High-strength, composite rotor is stronger and has better lubricating qualities allowing the blades to wear longer. As a result, less air (16 SCFM) is used more efficiently to maintain maximum power. LESS WEIGHT LOW PROFILE DESIGN IDENTIFICATION MARKING Non-vacuum model weighs just 22 ounces (1.4 lbs.), lighter than any other comparable sander. Only 3-1/2" high. Improves control, provides greater operator visibility and allows pad to be used flat on the work surface for better finishes. Easy to read model number and serial number markings located on the side of the tool.

5 5 3/32" DIAMETER ORBIT FOR ULTRA-FINE SANDING 3/16" DIAMETER ORBIT FOR GENERAL SANDING 3/8" DIAMETER ORBIT FOR AGGRESSIVE SANDING BLACK LEVER GREY LEVER NEW! BLUE LEVER PAINTER S TOOLS BODYMAN S TOOLS All models include our low-profile, premium urethane, weight-mated sanding pad with a 5/16"-24 male thread. May be converted to a vacuum tool with kit (see top of page 7). NON-VACUUM MODELS Replacement pads shown on next page. 3/32" Orbit 3/16" Orbit 3/8" Orbit Diameter Model No. Model No. Model No. 3" /2" " " " w/hook-face Pad CENTRAL VACUUM READY MODELS Ready for hook-up to portable or central vac system. Vacuum hose and cuffs available. BASIC VACUUM MODELS Tool creates its own vacuum. Not for central vac or portable vac systems. Includes 6 ft. long vac hose and 5-micron filtration reusable filter bag. 1" Vac Port Shown with optional air line. 3/32" Orbit 3/16" Orbit 3/8" Orbit Diameter Model No. Model No. Model No. 3" /2" " " " w/hook-face Pad /32" Orbit 3/16" Orbit 3/8" Orbit Diameter Model No. Model No. Model No. 3" /2" " " MACHINE SPECIFICATIONS (ALL MODELS) Motor Motor Sound Air Flow Rate Air Pressure Air Inlet Hose Spindle Weight Length Height HP RPM Level CFM/SCFM PSIG Thread Size Thread (Non-Vac/Vac) (Non-Vac/Vac) Inch.25 12, db(a) 2/ /4" NPT 1/4" 5/16"-24 female 1.4 to 1.6 lbs. 6" to 9" 3-1/2

6 6 All pads have common 5/16"-24 male thread. 13,000 RPM maximum rated. Fit most brands of orbital sanders. Perfectly weight-mated for use with our Dynorbital-Spirit sanders! Quality Pads Give Better Finishes and Faster Sanding! 3/8" THICK, LOW PROFILE, PREMIUM URETHANE RANDOM ORBITAL SANDING PADS Premium Urethane Vinyl-Face Pad Rubber Pad Post-Pattern No need to align paper holes with pad holes. Premium Urethane Hook-Face Pad Vinyl-Face for PSA-Type Discs Pad 5" Diameter 6" Diameter Construction Density Non-Vac Vacuum Non-Vac Vacuum Premium Urethane Soft Premium Urethane Medium Rubber Diamond Pattern Medium Rubber Post Pattern Medium Hook-Face, Short Nap for Reattachable Discs Premium Urethane Soft Premium Urethane Medium Hook-Face, Long Nap for Non-Woven Nylon Discs Rubber Medium A thicker pad conforms more easily to curved and contoured surfaces. Softer feel makes it ideal for featheredging. 3" and 3-1/2" random orbital vacuum sanders do not require pads with holes, as dust pick-up is from the outer edge of pad. Vinyl-Face for PSA-Type Discs 5/8" THICK, PREMIUM URETHANE RANDOM ORBITAL SANDING PADS All 5" and 6" diameter vacuum pads have six vacuum hole pattern. NOTE: Soft density pads are less aggressive and subject to shorter life expectancy for applications on curved and contoured surfaces. Vinyl-Face 3" Diameter 3-1/2" Diameter 5" Diameter 6" Diameter Density Dual Purpose Dual Purpose Non-Vacuum Vacuum Non-Vacuum Vacuum Soft Medium Hook-Face, Short Nap for Reattachable Discs Soft Medium Hook-Face, Blue Long Nap for Non-Woven Nylon Discs Medium Hook-Face CHANNEL-VAC PREMIUM URETHANE RANDOM ORBITAL SANDING PADS Circular recessed channel is 1/8" deep into the pad face connecting the pad s vacuum holes. Eliminates need to align the pre-punched holes in the abrasive with the holes in the pad. Vinyl-Face for PSA-Type Discs Pad 5" 6" Thickness Density Dia. Dia. 3/8" Soft /8" Medium /8" Soft /8" Medium Hook-Face, Short Nap for Reattachable Discs Pad 5" 6" Thickness Density Dia. Dia. 3/8" Soft /8" Medium /8" Soft /8" Medium

7 7 NON-VACUUM TO VACUUM CONVERSION KITS All kits include PSA vacuum sanding pad, shroud, vac adapter and necessary hardware for quick and easy conversion! Hook-face pads may be substituted upon request. Optional vacuum overskirts available: " & 3-1/2" Models " Models " Models Overskirt Enhances Vacuum Pick-up! Original Converts Kit Non-Vac Tool to Part Number 3-1/2" Self-Generated Vac-Ready /2" Central Vac-Ready " Self-Generated Vac-Ready " Central Vac-Ready " Self-Generated Vac-Ready " Central Vac-Ready REPLACEMENT DROP-IN MOTORS Allows quick and easy replacement. No motor adjustments needed. Follow maintenance procedures described in parts page. REPLACEMENT PARTS FOR EXHAUST ASSEMBLIES Non-Vacuum Machine Exhaust Central Vacuum Machine Exhaust NOTE: 3/8" motor includes new lock ring. Diameter 3" Dia. 3-1/2" Dia. 5" Dia. 6" Dia. Orbit Models Models Models Models 3/8" /16" /32" Full Service Repair Kit Special tools for proper disassembly/assembly of the Dynorbital-Spirit. Includes: Repair Collar Lock Ring Wrench Bearing Puller Bearing Press Tool Bearing Puller mm Hex Wrench Drop-In Motor Repair Kit Special tools for proper disassembly/assembly of the Dynorbital-Spirit drop-in motor. Includes: Repair Collar Lock Ring Wrench Tune-Up Kit Tune-up kit contains high and medium wear parts. REPAIR AND TUNE-UP ACCESSORIES 10 Self-Generated Vacuum (Vac-Ready)/ Machine Exhaust No. Part # Description Vacuum Adapter Dowel Pin Muffler Body O-Ring Vac Nozzle Index Key DYNAFOAM INTERFACE PADS FOR CONTOURS For hook n loop abrasives. Soft foam increases conformability, allowing operator to easily follow contours. Converts standard pad into a fine finishing and finessing pad! Interface pad easily contours to most surfaces. Attaches between sanding pad and hook n loop abrasive. One pad for non-vacuum and vacuum use. Part No. Diameter " /2" No. Part # Description Vac Tube Vacuum Adapter Muffler Insert (2) Muffler Cap Muffler Assembly " Model Replacement 26 mm open-end wrench for changing sanding pads " Hook-face interface pad attaches between sanding pad and hook-face abrasive.

8 8 Features Composite tool housing and handle create non-slip feel and insulate from cold air. All models feature our premium weight-mated PSA sanding pad. Hook-face pads also available. Adjustable speed control. Long handle provides excellent comfort and control, especially when working on vertical sides of workpiece. 3/16" Orbit for general sanding. NEW 3/8" DIA. ORBIT MODELS AVAILABLE! 3/8" Orbit for aggressive sanding. 5" and 6" models are 12,000 RPM. Pads have 5/16"-24 male spindle. NON-VACUUM MODELS Model REPLACEMENT SANDING PADS Model Model " models are 10,000 RPM. Pads mount with screws. Vinyl-Face for PSA-Type Discs Pad 5" Diameter 6" Diameter 8" Diameter Description Non-Vac Vac Non-Vac Vac Non-Vac Vac Premium Urethane Medium Density /16" Orbit 3/8" Orbit Diameter Model No. Pad No. Model No. Pad No. 5" " " N/A CENTRAL VACUUM MODELS Ready for hook-up to customer s central vacuum system or shop vac. 2" Vac Port 1" Vac Port Hook-Face, Short Nap for Reattachable Discs Pad 5" Diameter 6" Diameter 8" Diameter Description Non-Vac Vac Non-Vac Vac Non-Vac Vac Premium Urethane Medium Density SELF-GENERATED BASIC VACUUM MODELS Portable self-contained dust collection system includes 6 ft. long vacuum hose with reusable cloth bag (shown with optional air line). Tool creates its own vacuum and does not require an external vacuum source (not for central vac use). Model Model Model /16" Orbit 3/8" Orbit Diameter Model No. Pad No. Model No. Pad No. 5" " " N/A 3/16" Orbit 3/8" Orbit Diameter Model No. Pad No. Model No. Pad No. 5" " " N/A MACHINE SPECIFICATIONS Tool Size Motor Motor Sound Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height (Pad Dia.) HP RPM Level CFM/SCFM Thread Size PSIG Pound Inch Inch 5"/6".31 12, db(a) 3/19 1/4" NPT 1/4" /2 4-1/2 8".31 10, db(a) 3/19 1/4" NPT 3/8" /2

9 9 Features Shaves and levels body filler fast. 900 RPM s of gear-driven power! Composite housing reduces weight and protects against cold air transmission to operator s hands. Includes low-profile premium urethane weight-mated sanding pad for PSA discs. Hook-Face pads available. Long handle provides excellent comfort and control, especially when working on vertical sides of vehicles. Adjustable speed control. Unique cutting action is specific to Mud Hogs for quick and efficient filler removal. NON-VACUUM MODELS Model CENTRAL VACUUM MODELS Connect to shop vac or central vac system. 2" Vac Port Model Model OPTIONAL SIDE HANDLE ASSEMBLY Model " diameter. Model " diameter. Model Fits all Mud Hog sanders. For greater comfort and control. Model " diameter. Model " diameter. REPLACEMENT MUD HOG PADS Vinyl-Face for PSA-Type Discs NOTE: All pads mount with screws included with tool. Pad 6" Diameter 8" Diameter Construction Density Non-Vac Vacuum Non-Vac Vacuum Premium Urethane Medium Hook-Face, Short Nap for Reattachable Discs Pad 6" Diameter 8" Diameter Construction Density Non-Vac Vacuum Non-Vac Vacuum Premium Urethane Medium Hook-Face, Long Nap for Non-Woven Nylon Discs Pad 8" Diameter Construction Density Non-Vac Vacuum Rubber Medium MACHINE SPECIFICATIONS Tool Size Motor Motor Sound Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height (Pad Dia.) HP RPM Level CFM/SCFM Thread Size PSIG Pound Inch Inch 6" db(a) 3/19 1/4" NPT 1/4" /4 4-1/2 8" db(a) 3/19 3/8" NPT 3/8"

10 10 Weighs Only 1 Lb.! Requires No Air Tool Oil! Great For Color Sanding! Features All models include 3 ft. of lightweight, flexible air hose. Up to 3/16" dia. orbital action (the faster the sander runs, the more aggressive the cutting action). 20,000 RPM. Adjustable speed control. Easily interchangeable sanding pads. Uses reattachable and PSA-backed abrasive sheets and discs. Base plate is Hook-Face to accept interface pads. No tools required to change pads on all models. 4" X 4-1/4" RECTANGULAR MODELS 5" AND 6" DIAMETER ROUND MODELS Use 4-1/2" x 4-1/4" paper for hook or PSA pads. Clips are good for 9" x 11" sheet paper, cut in four, or 6" disc will fit too. Model With clips, includes /8" thin vinyl-face pad. Model Without clips, includes /4" thick, medium density hook-face pad. Model Without clips, includes /4" thick, medium density vinyl-face pad. Model " Dia. Includes /4" thick, medium density vinyl-face pad. Model " Dia. Includes /4" thick, medium density Hook-Face pad. Model " Dia. Includes /4" thick, medium density vinyl-face pad. Model " Dia. Includes /4" thick, medium density hook-face pad. Model All models on this page include flexible air line. Model CENTRAL VACUUM MODELS SELF-GENERATED VACUUM MODELS Ready for hook-up to central vac system or our portable vacuum systems. Both models have 1" diameter exhaust port for vacuum hose hook-up. Model Includes /8" thin, medium density PSA vacuum pad. Model Includes /8" thin, medium density hook-face vacuum pad. Tool creates its own vacuum! No external vacuum source needed. Tools feature 1" diameter exhaust port for vacuum hose hook-up. Hook-up to optional portable self-contained dust collection system. Model Includes /8" thin, medium density PSA vacuum pad. Model Includes /8" thin, medium density hook-face vacuum pad. See optional interface pads shown on next page. Optional Self-Generated Basic Vacuum System See page 41. MACHINE SPECIFICATIONS (ALL MODELS) Model Motor Orbit Dia. Sound Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Description RPM Inch Level CFM/SCFM Thread Size PSIG Pound Inch Inch All Models 20,000 max. 3/16 max. 83 max. db(a) 1/9 1/4" NPT 1/4"

11 11 Excellent on Primer and Clear Coat! Features Each model includes all hardware for self-siphoning with 20 ft. of water hose. Lightweight at just over 1 lb. Up to 3/16" diameter orbital action with adjustable speed control. 20,000 RPM tool never needs oil! 5" and 6" pads are interchangeable. Includes soft Interface Pad for contours. Fast, smooth and uniform surface preparation; reduced labor time. Our unique water feed through-the-pad design allows use of standard round wet paper with holes. No special sand paper or hole punch needed! Fingertip control valve allows for precise water flow. 5" AND 6" DIA. STANDARD SELF-SIPHONING MODELS NEW! AVAILABLE INTERFACE PADS FOR CONTOURS Model " Dia. Includes standard hook-face Pad and soft 5" Interface Pad. Model " Dia. Includes standard hook-face Pad and soft 6" Interface Pad. Soft foam increases conformability, allowing operator to easily follow contours. Converts standard pad into a fine finishing and finessing pad! Attaches between sanding pad and hook n loop abrasive. Easily contours to most surfaces. Hook-face interface pad attaches between sanding pad and hook-face abrasive. Part No. Description Density /4" x 4-1/2" Vinyl-Face Sponge Pad 1/2" Thick, Soft /4" x 4-1/2" Hook-Face Sponge Pad 1/2" Thick, Soft " Round Vinyl-Face Sponge Pad 1/4" Thick, Soft " Round Hook-Face Sponge Pad 1/2" Thick, Soft " Round Vinyl-Face Sponge Pad 1/4" Thick, Medium " Round Hook-Face Sponge Pad 1/4" Thick, Soft OPTIONAL PORTABLE WET TANK Siphon weight drops into bucket for ease of use. OPTIONAL FAUCET/GARDEN HOSE CONNECTION Quick Disconnect Fitting " Hose Bib Fitting. Model Two gallon capacity. Makes wet sanders self-sufficient; no need for a garden hose. Translucent tank allows easy viewing of liquid level. Hand pump manually pressurizes container (50 PSI maximum pressure). The quick disconnect connection provides easy hook-up and quick release of tool. IMPORTANT: Must order Part No Quick-Disconnect Fitting for wet tank connection. Order separately. MACHINE SPECIFICATIONS (ALL MODELS) Model Motor Orbit Dia. Sound Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Description RPM Inch Level CFM/SCFM Thread Size PSIG Pound Inch Inch All Models 20,000 max. 3/16" max. 83 max. db(a) 1/9 1/4" NPT 1/4"

12 12 A Better Way to a Consistent Finish! Features Achieve a uniform and consistent finish faster and easier than before. Removes runs, sags, orange peel, dust nibs and other imperfections. Saves time and labor; increases production. Each model comes complete with air and water connections (shown lower right). 10,000 RPM air motor with adjustable speed control. Overskirt shroud is standard on all machines to control water splash. Part number Short-Nap Hook-Face Pad included (1/2" thick). Hook-up to garden hose or optional Portable Wet Tank (shown below). Adjustable speed control. Provides the very best finish. Excellent finesse sander. Tight 3/32" Orbit 3/32" Dia. Orbit Tool Size Model Number 3-1/2" " " /16" Orbit Ideal for general wet sanding and production-type jobs. 3/16" Dia. Orbit Tool Size Model Number 3-1/2" " " INCLUDED AIR AND WATER CONNECTIONS " Hose Bib Fitting /8" Quick Disconnect Fitting TWO-WAY WATER VALVE Push the button as desired, or... lock the valve in place for desired water flow rate! 1/4" NPT female air supply connection Air Line (1/4" diameter) Overhose A useful option! Eliminates need for garden hose. Two gallon capacity. Heavy-duty corrosion resistant construction. Translucent tank allows easy viewing of liquid level. Hand pump manually pressurizes container (50 PSI maximum pressure). OPTIONAL PORTABLE WET TANK No need for external water source! The quick disconnect connection provides easy hook-up and quick release of tool. Bring water source to the work. No need to trip over water hoses on the busy shop floor. MACHINE SPECIFICATIONS Model Motor Motor Pad Dia. Sound Air Flow Rate Air Inlet Air Pressure Weight Length Height Number HP RPM Inch Level CFM/SCFM Thread PSIG Pound Inch Inch 10341/ , /2 76 db(a) 2/16 1/4" NPT / / , db(a) 2/16 1/4" NPT /2 3-5/ / , db(a) 2/16 1/4" NPT /2

13 13 A True Rotary Disc and Random Orbital Sander in One! Built-in dial selects between random and rotary action. Features 12,000 RPM,.4 Hp motor with adjustable speed control and rear exhaust. Very lightweight with ultra-smooth sanding performance. All models include our best urethane PSA pad with 5/16"-24 spindle (hook-face pads available). Thermal-insulated housing provides durability and reduces cold air transmission to operator. RANDOM ORBITAL SANDER 3/16" Orbit Featheredge & Finesse Body Panels! DISC SANDER Strip, Level and Grind to Bare Metal! Rotary Orbit Model " diameter. Model " diameter. NON-VACUUM MODELS Model Vinyl-Face for PSA-Type Discs REPLACEMENT PADS Pad 5" Diameter 6" Diameter Description Non-Vac Vac Non-Vac Vac Premium Urethane Medium Density Hook-Face, Short Nap for Reattachable Discs Pad 5" Diameter 6" Diameter Description Non-Vac Vac Non-Vac Vac Premium Urethane Medium Density CENTRAL VACUUM MODELS Connect to shop vac or central vac system. Model " diameter. Model " diameter. Optional Overskirt Shroud Must use P/N (4) screws and P/N (4) washers to install shroud. Shroud enhances vacuum capacity of tool in random mode. NOTE: All vacuum models have 1" exhaust port and are designed to vacuum in random orbital mode only. Model SELF-GENERATED VACUUM MODELS Includes hose and bag. Not for use with portable or central vac systems. Includes Self-Contained Dust Collection System featuring 6 ft. long vacuum exhaust hose assembly with Standard Reusable 5-micron Filtration Felt Bag. Model " diameter. Uses Replacement Pad. Model " diameter. Uses Replacement Pad. Model NOTE: Designed to vacuum in random orbital mode only. Shown with optional air line. MACHINE SPECIFICATIONS Machine Motor Motor Sound Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Description HP RPM Level CFM/SCFM Thread Size PSIG Pound Inch Inch 5" Models.4 12, db(a) 4/25 1/4" NPT 3/8" /4 4-1/2 6" Models.4 12, db(a) 4/25 1/4" NPT 3/8" /4 4-1/2

14 14 Features Tool has precision gear-set for smooth, controlled, unstoppable sanding power; always a consistent sanding stroke! 2,400 strokes per minute; 3/8" sanding stroke. Ideal for areas where a conventional long board sander is too big. Adjustable speed control. On non-vac model, pad can be rotated 360 and set at any comfortable position. NON-VACUUM MODEL Model Non-vac model, pad can be set and locked to any 360 position. Includes Vinyl-Face Pad for 2-3/4" wide x 8" abrasive paper. Reattachable abrasive sheets may be mounted with optional "short-nap" hook-face pad. 3-2/3" x 7" and 2-3/4" x 11" pads are also available (see pages 15 and 16). CENTRAL VACUUM-READY MODEL Model Includes Vinyl-Face Sanding Pad. Ready to connect to your central vacuum system or shop vac. Mount 2-3/4" x 8" vacuum paper (6-hole) Punch Plate for 2-3/4" x 8" pad and Punch Plate for 3-2/3" x 7" pad are available to convert to vacuum paper. Tool has 1" exhaust port Punch Plate SELF-GENERATED VACUUM MODEL Uses 7", 8" and 11" long pads. 2-3/4" WIDE X 8" LONG REPLACEMENT PADS Model Includes Vinyl-Face Sanding Pad with exhaust hose and reusable cloth bag (shown with optional air line). Tool creates its own vacuum! No external vacuum required (not for use with central vacuum systems). Mount 2-3/4" x 8" vacuum paper (6-hole) Part No. Type Description Non-Vacuum Vinyl-Face (PSA) Vacuum Vinyl-Face (PSA) Non-Vacuum Hook-Face Short Nap Vacuum Hook-Face Short Nap Non-Vacuum Hook-Face Long Nap SPECIALTY PADS Vinyl-face; accepts 2-3/4" wide x 8" long PSA abrasive sheets Curved pad Radiused pad. NOTE: For vinyl-face pad with clips, order 57460; uses 2-3/4" x 11" abrasive sheets. MACHINE SPECIFICATIONS Model Motor Stroke Strokes Sound Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Description HP Inch Per Minute Level CFM/SCFM Thread Size PSIG Pound Inch Inch All Models.25 3/8 2, db(a) 3/18 1/4" NPT 1/4" /4

15 15 Features Sanding pad may be rotated 360 and set and locked to any comfortable position. Insulated longer handle for added control and stability. Pad can be set to any fixed position! DYNALINE IN-LINE 11" BOARD SANDER Model Non-vacuum, powerful 2,400 RPM motor, 3/8" sanding stroke. Includes 2-3/4" wide x 11" long, premium urethane PSA sanding pad with clips (57512). For use with hook-face, PSA coated abrasives. 3-2/3" x 7" and 2-3/4" x 8" pads may also be used. DYNALINE IN-LINE 11" BOARD SANDER KIT Kit Includes tool with 2-3/4" wide x 11" long, premium urethane PSA pad with clips (57512), and hook-face pad (57513) with sample abrasives. REPLACEMENT PADS Premium urethane pad resists heat build-up. For use with PSA or hook-face coated abrasives and non-woven nylon sheets or rolls Vinyl-face, medium density pad Hook-face, short-nap, medium density pad Vinyl-face, medium density pad with clips Hook-face, long-nap, medium density pad MACHINE SPECIFICATIONS Model Motor Stroke Strokes Sound Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP Inch Per Minute Level CFM/SCFM Thread Size PSIG Pound Inch Inch /8 2, db(a) 3/18 1/4" NPT 1/4" /4

16 16 Features Smooth, quiet, adjustable 8,000 RPM tool is ideal for blocking and flat sanding. Every model has a standard 3/32" orbit pattern which provides the very best finish! Spring clips standard on all models. 3/32" Orbit NON-VACUUM MODEL Model Non-Vacuum; 3-2/3" x 7" abrasive sheet fits pad area. Use 3-2/3" x 9" paper when securing the paper to the built-in clips. Includes premium Vinyl-Face Pad for PSA paper. CENTRAL VACUUM MODEL Model Includes premium Vinyl-Face Sanding Pad for PSA paper. Ready to connect to your central vacuum system or shop vacuum. Tool has 1" exhaust port. SELF-GENERATED VACUUM MODEL Model Includes premium Vinyl-Face Sanding Pad (3-2/3" x 7") Self-Generated Dust Collection System with exhaust hose and reusable cloth bag (optional air-line). Not for central vac or portable vac systems. Tool creates its own vacuum. 3-2/3" WIDE X 7" LONG REPLACEMENT PADS Part No. Type Description Non-Vacuum Vinyl-Face (PSA) Non-Vacuum Hook-Face Short Nap Non-Vacuum Hook-Face Long Nap Vacuum Vinyl-Face (PSA) Vacuum Hook-Face Short Nap /3" x 7" Punch Plate for converting non-vac to vacuum paper. OPTIONAL PUNCH PLATE MACHINE SPECIFICATIONS Model Motor Motor Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP RPM CFM/SCFM Thread Size PSIG Pound Inch Inch All Machines.18 8,000 2/16 1/4" NPT 1/4" /4 4-1/4

17 17 Model Excellent tool for detail shops! Use with shampoo or cleaner to power out dirt and stains. Random orbital 10,000 RPM action allows brush bristles to loosen trapped dirt particles. Adjustable speed control. Helps to restore matted carpet fibers. Rejuvenate worn and dirty interiors! Random orbital agitation action makes the difference in deep cleaning carpets, floor mats, seats (cloth, leather, vinyl), trunk areas, tires and convertible tops. Tool Includes: Brush Holder Short-Nap 3-1/2" Cleaning Brush (1/2" thick) Long-Nap 3-1/2" Cleaning Brush (7/8" thick) 3/16" Orbit Brush Holder Short-Nap Brush Long-Nap Brush MACHINE SPECIFICATIONS Model Motor Motor Pad Sound Spindle Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP RPM Size Level Thread CFM/SCFM Thread Size PSIG Pound Inch Inch , /2 77 db(a) 5/16"-24 Female 2/16 1/4" NPT 3/8" /4 3-1/2

18 18 Features 2,400 RPM geared rotary action. Rear exhaust motor with speed control. Use Dynabrade Finesse Creme and Glaze for superior gloss finishes after compounding. Compact size, excellent power to buff and polish motorcycle gas tanks and helmets, small parts, side view mirrors and bumpers. Does the work where full-size buffers are too big! 3" DIAMETER BUFFER 5" DIAMETER BUFFER Model Includes Hook-Face 3" Back-Up Pad, sample Terry Cloth and Wool Pads. Model Includes Hook-Face Back-Up Pad and sample " Foam Polishing Pad. Buffing pad selection shown on next page. 3" THREE-IN-ONE VERSATILITY KIT 3" Buffer, 3" Rotary Sander, 1-1/4" Dust Nib Remover! Includes all you need for quick, simple spot repair on painted surfaces. Remove dust nibs and scratches on base coat/clear coat! Basic tool 2,400 RPM Hook-Face Backing Pad (3" diameter) Medium 1-1/4" Vinyl-Face Sanding Pad Soft Vinyl-Face Pad (3-1/2" diameter) Mini-Orbital Head with 1/4"-20 female thread to fit tool spindle, 1/4"-20 male thread to mate with sanding pad. Sample 9-micron (1,000 grit) micro-finishing film discs (1-1/4" diameter); Sample Abrasive Pack (3-1/2" 100 grit PSA sanding discs) Terry Cloth Bonnet (3" diameter); Wool Bonnet (3" diameter); Foam Waffle Pad (3" diameter) Dynabrade Finesse-It Creme (4 oz.); Dynabrade Glaze (4 oz.); Wrenches for pad changes. Excellent for Finesse Sanding Clear Coat Paint and Spot Repair! Why Re-do Entire Panels? Features 1-1/4" dia. discs confine sanding to smallest possible area. Eliminates need to refinish entire body panels. Includes: 1-1/4" dia. medium sanding pad with sample micro-finishing film abrasive discs. 3/4" pads and discs are available. Weighs only 1-3/4" lb. for greater comfort and control! Low vibration and whisper-quiet air motor. Combined orbital and random action provides ultra-smooth finishes. Model Includes Random Orbital Sanding Head. 5,000 RPM, 3/16" orbit. Model Includes Random Orbital Sanding Head. 2,400 RPM (geared), 3/16" orbit. 3/16" Diameter Orbit Random Action Other 1-1/4" and optional 3/4" pads shown on page 42. MACHINE SPECIFICATIONS Model Motor Sound Spindle Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number RPM Level Thread CFM/SCFM Thread Size PSIG Pound Inch Inch 10360/ ,000/2, db(a) 1/4"-20 male 3/18 1/4" NPT 1/4" / / , db(a) 1/4"-20 male 3/18 1/4" NPT 1/4" /4

19 19 BUFFER/POLISHERS Features 2,400 RPM geared rotary motor provides plenty of torque and helps to prevent burn-through on clear coats! Speed lever throttle, rear exhaust, insulated housing. Long handle provides two-handed control. Model " Dia. 3" buffer/polisher. Includes Back-Up Pad, Terry Cloth and Synthetic Wool Buffs. Use with Dynabrade Finesse Sanding Creme and Dynabrade Glaze. Tool achieves a superior high gloss finish after compounding. Model " Dia. 5" buffer/polisher. Includes Back-Up Pad and White Foam Polishing Pad. Use with Dynabrade Finesse Sanding Creme and Dynabrade Glaze. Tool achieves a superior high gloss finish after compounding. MINI-DYNORBITAL SANDER Model Combined orbital/random action provides a smooth, swirl-free finish. 3/16" diameter orbit. Includes Mini-Orbital Head and /4" Medium Sanding Pad with sample 9-micron (1,000 grit) micro-finishing discs. Random Orbit Head 1-1/4" PSA Sanding Pad 3/16" Orbit THREE-IN-ONE VERSATILITY KIT REPLACEMENT 3" TO 7" HOOK-FACE BUFFING PADS Use on two-hand or palm-style buffers. Terry Wool Model Foam (Flat Face) Size Part No. Description Type/Color 3" Terry Cloth 3" Synthetic Wool 3" Foam Flat Face Polishing/White 3" Foam Flat Face Cutting/Yellow 3" Natural Wool Sheepskin 3-1/2" Natural Wool Sheepskin 5" Natural Wool 5" Foam Flat Face Polishing/White 5" Foam Flat Face Cutting/Yellow 5" Natural Wool Sheepskin 6" Foam Flat Face Polishing/White 6" Foam Flat Face Cutting/Yellow 7" Natural Wool Sheepskin " buffer. 3" rotary sander. 1-1/4" dust nib remover. Includes all you need for quick, simple spot repair on painted surfaces. Remove dust nibs and scratches on base coat/clear coat! Basic tool 2,400 RPM; Hook-Face Backing Pad, 3" dia.; Medium 1-1/4" Sanding Pad.; wrenches for accessories change Terry Cloth Bonnet, 3" dia.; Wool Bonnet, 3" dia.; Flat Foam Pad, 3" dia.; Soft Vinyl-Face Pad, 3-1/2" dia Sample Abrasive Pack, 3-1/2" (120 grit PSA sanding discs) Dynabrade Finesse Sanding Creme, 4 oz.; Dynabrade Glaze, 4 oz Mini-Orbital Head with 1/4"-20 female thread to fit to tool spindle, 1/4"-20 male thread to mate with pad. Sample 9-micron (1,000 grit) micro-finishing film discs, 1-1/4" dia. MACHINE SPECIFICATIONS Model Motor Motor Sound Spindle Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP RPM Level Thread SCFM Thread Size PSIG Pound Inch Inch 10551/ , db(a) 1/4"-20 Male 3/18 1/4" NPT 3/8" /8 3-1/ , db(a) 1/4"-20 Male 3/18 1/4" NPT 3/8" /8 4-3/4

20 20 Objective To provide a method for removing minor surface defects that protrude through the clear coat such as dust nibs and orange peel. Achieve OEM results in your shop! Benefits Maintains surface integrity. No bullseye due to sanding process. Eliminates compound slinging. Eliminates swirl marks, hazing and sand scratches. Model Features a 14 mm diameter offset orbit. Ideal for Finesse-It repairs. Tool runs at 10,000 RPM free speed, but slows to 7,000 RPM when running under load. Includes back-up pad (P/N Foam Buff must be ordered separately). Rear exhaust muffler design reduces noise levels for smooth operating performance. 3" DIAMETER DYNABUFFER 5" DIAMETER DYNABUFFER Lightweight, thermal-insulated housing reduces cold air transmission to the operator. OFFSET ORBIT! Optional Side Handle available. Model Model (10240 with Hanger Bracket) Features a 14 mm diameter offset orbit. Tool runs at 10,000 RPM free speed, but slows to 5,000 RPM when running under load. Ideal for Finesse-It repairs. Rear exhaust muffler design reduces noise levels for smooth operating performance. Lightweight, thermal-insulated housing reduces cold air transmission to the operator. Must order P/N Hook-Face Backing Pad and Foam Buff separately. Model OFFSET ORBIT! PALM-STYLE MINI RANDOM ORBITAL SANDER Model Excellent for finesse sanding clear coat paint and spot repair! Why redo entire panels? Weighs only 1-3/4 lb. for greater comfort and control. 5,000 RPM, 3/16" diameter orbit. Low vibration and whisper-quiet air motor. Combined orbital and random action provides ultra-smooth finishes. Includes Random Orbital Sanding Head. Step 1: Finesse Sanding Process Time: 2-5 Seconds Use Dynabrade Palm-Style Mini-Random Orbital Sander (Model 10360), (5,000 RPM) with Trizact sandpaper affixed until the dirt or other defect has been sanded out of the clear coat. Use with vinyl-face 3M Stikit Roloc Disc Pad (54033) and 3M Trizact Sandpaper 466LA Grade A5 micron #49850 (sold separately). Water must be used for sanding lubrication. Apply water directly to disc to avoid excessive water which reduces sanding effectiveness and disc adhesion. Start on, stop off. A simple rule of thumb! Place the sanding disc slightly off-center of the defect with slight pressure on the pad, throttle the tool on and sand in a random pattern for 2-5 seconds to remove defect. Keep the sanding pad flat while sanding. Throttle the tool off and remove from surface. Let the tool and abrasive do the work! Keep the area sanded as small as possible. Wipe the area clean when finished with a clean non-scratching cloth. Hook-face backing Foam waffle design /4" dia. buff mm dia. buff. FINESSE-IT BUFF PAD Model DYNA-STEP TWO-STEP SPOT REPAIR SYSTEM EXPLAINED... NOTE: Finesse-It Polishing compound and Trizact Film Abrasives must be purchased separately. MACHINE SPECIFICATIONS " dia. buff. Step 2: Sand Scratch Removal And Polish Process Time: 5-10 Seconds Apply a small dime-size drop of Final Finish Polish compound. 3M Final Finish (gray) part no (sold separately). Use the polish pad to spread the compound evenly over the spot. NOTE: Precondition virgin pad by evenly spreading compound directly on pad. Start on, stop off. A simple rule of thumb! Place the buffing pad on sanded area. Apply approximately 10 pounds of force to the work surface, throttle the tool on, adjust force as required to feel the sweet spot (low vibration) and buff in a random pattern for 5-10 seconds to remove defect. When running Dynabuffer, keep the pad flat or slightly tipped forward. Feather the area with lighter pressure for two seconds. Wipe the area with a clean non-scratching cloth and inspect. If the sand scratches are not removed, re-polish as needed. Model Motor Motor Sound Pad Orbit Spindle Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP RPM Level Size Diameter Thread CFM/SCFM Thread Size PSIG Pound Inch Inch , db(a) 3" 14 mm 5/16"-24 Female 2/16 1/4" NPT 3/8" / , db(a) 5" 14 mm 5/16"-24 Male 2/16 1/4" NPT 3/8" /4 4-1/ , db(a) 3/4", 1-1/4" 3/16" 5/16"-24 Male 1/6 1/4" NPT 3/8" /8 3M, Stikit, Roloc, Finesse-It and Trizact are registered trademarks of 3M Co.

21 21 Features Lightweight... only 1.6 lbs.; whisper-quiet. Uses reattachable and PSA mounted, coated non-woven nylon and sponge abrasives. 15,000 RPM rear exhaust air motor. Features 1/32" dia. orbital action for a superior finish. Non-marring composite Dynaswivel flow-control speed regulator is included. Insulated composite handle is offset for operator comfort and may be adjusted for left or right-handed users. Many versatile applications: Composite bumper repair; bevel edges of cut-outs. Reaches places conventional orbitals can t touch: around car door jambs, handles, window sills, grooves, contours and hood cowl vent openings. Works well on cross-members under car hoods and trunks. Restoration work. DYNAFINE DETAIL SANDER DYNAFINE DETAIL SANDER VERSATILITY KIT Model Includes triangular and tear-drop hook-face pads Includes tool with hook-face and PSA pads and an assortment of coated hook-face, non-woven nylon and sponge abrasives. Sanding pad easily adjusts 360 to any position. TRIANGULAR PADS TEAR-DROP PADS 2-7/8" Part Number Description 2-7/8" Part Number Description 3-1/8" Vinyl-Face, PSA Short-Nap, Hook-Face 3-1/8" Vinyl-Face, PSA Short-Nap, Hook-Face Long-Nap, Hook-Face Long-Nap, Hook-Face DYNAFINE FINGER SANDER Model Tiny 1/32" diameter orbital action for fine finishes. Eliminate tedious hand sanding. Lightweight... only 1.6 lbs. Excellent for use on edges, corners and hard-to-reach areas. Eliminate wrapping sand paper around paint sticks, let the tool do the work. Includes tool with 3/8" wide sanding arm, sample platen pads and sample abrasive strips (120, 180 and 240 grit). DYNAFINE FINGER SANDER DELUXE VERSATILITY KIT Includes: tool, and /4" Sanding Arms. Hook-face and PSA pads. 3/8" and 3/4" abrasive strip assortment (120, 180, 240 grits). Coated hook-face, non-woven nylon and sponge abrasives. Abrasive Strips Sanding Arm MACHINE SPECIFICATIONS Model Motor Motor Sound Air Flow Rate Hose Air Pressure Weight Length Height Number HP RPM Level CFM/SCFM Size PSIG Pound Inch Inch All.16 15, db(a) 2/19 3/8" /4

22 22 29 Features High torque planetary-geared air motor for long life and power! Rear exhaust muffler design reduces noise levels for smooth operating performance. Lightweight thermal-insulated housing reduces cold air transmission and vibration to the operator. Ideal for buffing and polishing fiberglass, clear coats, plastics and other materials Spot repair for dust nibs and surface imperfections made easy all-in-one kit! Includes: ,200 RPM Tool " Wool Buff /4" Roloc Pad /4" Diameter Pad Mini-Orbital Head /4" Chuck, 3/8" /4" Diameter Pad " Hook n Loop Pad, 3/8"-24 Female Thread /4" 9-Micron (1,000 Grit) Film Discs " Terry Cloth Bonnet Micron (1,000 Grit) Film Discs oz. Finesse Sanding Creme oz. Glaze NOTE: Tool may be ordered separately (Model No ); includes P/N and P/N Buffs only. RIGHT ANGLE BUFFER VERSATILITY KIT 3" RIGHT ANGLE BUFFERS Model Model ,200 RPM 5,000 RPM Includes Hook-Face Pad, Terry Cloth Bonnet and Wool Buffing Bonnet. Hook-face attachment makes changing pads quick and easy. Conventional rotary action. 7 offset handle,.3 Hp motor. 5" RIGHT ANGLE BUFFER Model ,200 RPM Includes Hook-Face Pad. Hook-face attachment makes changing pads quick and easy. Also includes Foam Flat Face Buffing Pad. 7 offset handle,.3 Hp motor. Model Terry Pad Wool Pad Shown On Tool MACHINE SPECIFICATIONS Model Motor Pad Dia. Sound Spindle Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP Inch Level Thread CFM/SCFM Thread Size PSIG Pound Inch Inch 51400/ db(a) 3/8" - 24 male 3/24 1/4" NPT 1/4" /4 4-1/ db(a) 3/8" - 24 male 3/24 1/4" NPT 1/4" /4 4-1/ db(a) 3/8" - 24 male 3/23 1/4" NPT 1/4" /2

23 23 2" DIAMETER,.4 HP, 7 OFFSET DISC SANDER 4-1/2" - 5" DIAMETER PISTOL GRIP DISC SANDERS Model ,000 RPM New lightweight, composite, ergonomic handle. Includes locking-type pad for 2" 3M Roloc Discs. Has 1/4"-20 male spindle, rear exhaust. Model Model ,000 RPM 11,000 RPM 5/8"-11 male spindle,.7 Hp, rear exhaust. Includes Disc Mount Assembly. Ideal for use with abrasive impregnated non-woven nylon discs Vacuum Shroud available accepts 1-1/4" dia. vacuum hose. 2" - 3" DIAMETER RIGHT ANGLE DISC SANDER 4" DIAMETER PISTOL GRIP DISC SANDER Model ,000 RPM Powerful high-torque air motor, rear exhaust. Includes locking-type disc pad (3" dia., medium density, 3/8"-24 female thread). Thermal-insulated handle reduces cold air transmission to operator. NEW! NEW! Model ,000 RPM 3/8"-24 male spindle,.7 Hp, rear exhaust. Ideally speed-mated to 4" dia. Roloc discs. Includes Roloc Pad. Removable side handle. Model RIGHT ANGLE, 1/4" COLLET DIE GRINDER Model ,000 RPM Powerful high-torque air motor, rear exhaust. Features shorter muffler for hard-to-reach areas. Thermal-insulated handle reduces cold air transmission to operator. NEW! 3" DIAMETER GEARLESS CUT-OFF WHEEL TOOLS Model Front Exhaust Model Rear Exhaust.5 Hp, 20,000 RPM, right angle, safety-lock throttle lever. Ideal for cutting metal, fiberglass and plastic. 7 lightweight composite offset handle for greater operator comfort and control. Model Model Model ,000 RPM 30,000 RPM.4 Hp, gearless, rear exhaust. Lightweight, insulated, ergonomic handle. Adjustable collar for comfort and control. Great for left or right hand usage. NEW! 7 OFFSET, 1/4" COLLET DIE GRINDER Model Carbide Burr Kit, See Page 37. MACHINE SPECIFICATIONS Model Motor Motor Sound Spindle Maximum Air Flow Air Inlet Hose Air Pressure Weight Length Height Number HP RPM Level Thread CFM/SCFM Thread Size PSIG Pound Inch Inch , db(a) 5/8"-11 male 4/30 1/4" NPT 3/8" /8 5-5/ , db(a) 5/8"-11 male 4/32 1/4" NPT 3/8" /8 5-5/ , db(a) 3/8"-24 male 4/32 1/4" NPT 3/8" /8 5-5/ , db(a) 3/8"-24 male 3/20 1/4" NPT 1/4" /2 3-7/ , db(a) M8 x 1.0 male 3/18 1/4" NPT 1/4" / , db(a) M8 x 1.0 male 3/21 1/4" NPT 1/4" / , db(a) 3/8"-24 male 4/28 1/4" NPT 3/8" / , db(a) 3/8"-24 male 4/26 1/4" NPT 3/8" /8 5-1/ , db(a) 1/4"-20 male 3/20 1/4" NPT 1/4" / , db(a) 3/8"-24 male 3/20 1/4" NPT 1/4" /2 3-7/8

24 24 MINI-DYNAFILE II ABRASIVE BELT MACHINE Model Tool includes Contact Arm for 1/2" wide x 12" long abrasive belts; other arms available for 1/8" and 1/4" wide belts. Lightweight, ergonomic tool. Rear exhaust. Light grinding and deburring applications. Great for engine porting. Accepts coated and abrasive impregnated non-woven nylon belts. Pop-off belt guard for easy abrasive change. Multi-position grinding head pivots 180. MINI-DYNAFILE II VERSATILITY KIT Includes tool with unique drive wheel which accepts included threaded collet for easy conversion to a die grinder Contact Arm mounted on tool. Two additional arms: and Carry case and sample 1/2" wide coated abrasive and non-woven nylon belts. Grind, Sand, and Deburr in Those Tight Spots! Belt Sander and Die Grinder in One Tool! DYNAFILE II ABRASIVE BELT MACHINE Model Grind, deburr, blend and surface condition with coated or non-woven nylon belts. Easy on/off power switch; tool is double-insulated. New and improved design, more comfortable with easy maintenance Contact Arm for 1/2" wide x 18" long abrasive belts. Accepts interchangeable contact arm for use with 1/4" to 3/4" wide x 18" long abrasive belts. Side handle included for right or left hand operation. Has eight-foot electric cord; connects to standard 120 volt outlet. DYNAFILE II VERSATILITY KIT Electric Dynafile II with Contact Arm for 1/2" wide x 18" long abrasive belts. Two additional contact arms: and Eight abrasive belts. Assortment of platen pads mount to contact arm for deburring edges or sanding flats. Durable carrying case. MACHINE SPECIFICATIONS Model Motor Motor Abrasive Belt Size Sound Maximum Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP RPM Inch Level SFPM CFM/SCFM Thread Size PSIG Pound Inch Inch ,000 1/8-1/2 W x 12 L 87 db(a) 4,890 2/20 1/4" 3/8" /4 3-1/2 Model Motor Motor Abrasive Belt Size Sound Voltage Current Phase Frequency Maximum Weight Length Height Number HP RPM Inch Level Amps SFPM Pound Inch Inch ,000 1/4-3/4 W x L 81 db(a) 110 V Hz 2,

25 25 Standard Features on All Models 12,000 RPM. Easy on/off ergonomic power switch locks on to reduce hand and arm fatigue; instantly releases to the touch for safety. Double-insulated, 8 ft. cord connects to standard 110/120 volt outlet. Externally accessible brushes for quick, no hassle replacement. Reversible side handle for left or right handed operation. Motors are built for high power output, small size and weight with long life under continuous duty working conditions. All ball bearing construction for smooth, efficient running and long life. Small diameter motor housing for easy, firm grip; reduces operator fatigue. 4" DISC SANDER 4-1/2" DEPRESSED CENTER WHEEL GRINDER/SANDER Model Includes " Backing Pad for locking-type discs. Tool has 3/8"-24 male spindle with locking button for wheel and accessory replacement. Tool may be inverted when not in use and supported on tool rest. Model Grinder uses only Type 27 reinforced depressed center wheel, not included. Guard and wheel flange included. Tool has 5/8"-11 male spindle with locking button for wheel and accessory replacement. Aggressive 3/8" random orbit pattern. All models feature our premium vinyl-face, urethane sanding pad with 5/16"-24 male spindle for best performance. Model " diameter, non-vacuum. Model " diameter, central-vacuum. Model " diameter, non-vacuum. Model " diameter, central-vacuum. DYNORBITAL SUPREME RANDOM ORBITAL SANDER 3/8" ORBIT 8' Long Electric Cord Vinyl-Face for PSA-Type Discs Pad 5" Diameter 6" Diameter Description Non-Vac Vac Non-Vac Vac Premium Urethane Medium Density Hook Pads available, see page 6. 3/8" Diameter Orbit Pattern for aggressive stock removal. MACHINE SPECIFICATIONS Model Motor Motor Sound Voltage Current Phase Frequency Weight Number HP RPM Level Amps Pound All 1 12, db(a) 110 V Hz 4.8

26 26 for the Value-Minded Professional DYNAZIP SURFACE PREPARATION TOOL Excellent power and torque at 3,200 RPM for effectively removing seam sealer, rust proofing, chip guard, paint and surface rust in common and tight areas around vehicles. Dramatically outperforms conventional spiral-wound wire wheels without clogging. Quick and easy accessory change. Tool duplicates sand-blasting effect without surface fatigue and provides ultimate contour adaptation. DYNAZIP-ERASER DECAL REMOVAL TOOL Model Superior performance versus conventional solid or doughnut-type wheel erasers with no paint damage. Works great on metal surfaces; excellent for removing two-sided adhesive molding tape too. Wheel has crepe teeth serrations for improved cooling effect air flow. Also resists heat buildup and prevents jumping or vibrations. Includes 3,200 RPM tool with side handle, wheel guard and Decal Removal Wheel Assembly (which includes hub). Model Includes: 3,200 RPM Tool Side Handle Guard /4" Hub Assembly /4" Coarse Wire Wheel DYNAZIP AIR TOOL Model Includes: Standard Tool /4" Coarse Wire Wheel /2" Coarse Wire Wheel Zip Eraser Wheel /2" Wheel Hub Assembly /4" Wheel Hub Assembly DYNAZIP AIR TOOL KIT Model Includes: Standard Tool /4" Coarse Wire Wheel /4" Medium Wire Wheel /4" Fine Wire Wheel /2" Coarse Wire Wheel /2" Fine Wire Wheel Zip Eraser Wheel /2" Wheel Hub Assy /4" Wheel Hub Assy. DYNAZIP DELUXE KIT REPLACEMENT ZIP WIRE WHEEL HUB ASSEMBLIES /2" wide zip wheel hub; includes long screw, locking washer and wrench. Mounts the 1/2" wide zip wire wheels /4" wide zip wheel hub; includes short screw, locking washer and wrench. Mounts the 3/4" wide zip wire wheels; also mounts the Zip-Eraser Decal Removal Wheel. NOTE: Wire wheels only; no hub included. REPLACEMENT ZIP WIRE WHEELS Part No. Size Grade Band Tip Type " dia. x 3/4" wide Coarse Black Bent " dia. x 3/4" wide Medium Blue Bent " dia. x 3/4" wide Fine Green Straight " dia. x 1/2" wide Coarse Blue Bent " dia. x 1/2" wide Fine Green Straight ZIP-ERASER DECAL REMOVAL WHEEL Eraser Wheel Zip-Eraser Decal Removal Wheel (wheel only, no hub) Eraser Wheel with Hub Zip-Eraser Decal Removal Wheel (includes mated 3/4" wide Hub). MACHINE SPECIFICATIONS Model Motor Motor Wheel Size Sound Spindle Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP RPM Inch Level Thread CFM/SCFM Thread Size PSIG Pound Inch Inch All.4 3, /2 87 db(a) 3/8"-24 male 3/28 1/4" NPT 3/8" /2

27 for the Value-Minded Professional 27 DISC SANDERS Model Model " Diameter 3" Diameter 7 offset handle for comfort and control, front exhaust, safety-lock lever throttle. Composite grip absorbs vibration and reduces cold air transmission to the operator. Model includes 2" dia. locking-type pad; Model includes 3" dia. locking-type pad. BOTH GEARLESS! Model BUFFER Model ,500 RPM free speed. Uses 5" to 8" diameter buffs. Insulated handle absorbs vibration and reduces cold air transmission to the operator. Compact and lightweight design. 5/8"-11 male spindle. Rear exhaust, variable speed safety-lock lever throttle. Soft-grip handle can be positioned for right or left hand operation. Back-up pad and polishing bonnet not included. Model with M14x2 male spindle also available. MUCH LIGHTER THAN ELECTRIC BUFFERS! Model " DIA., RIGHT ANGLE BUFFER 3" DIA., RIGHT ANGLE BUFFER/ SANDER KIT Model Model ,300 RPM 3,200 RPM Uses 3" diameter buffs. Built-in speed control, rear exhaust. 3/8"-24 male spindle. Safety-lock lever throttle. Composite grip absorbs vibration and reduces cold air transmission to the operator. Includes Back-Up Pad (3" dia. hook n loop) and Wool Buff (3-1/2" dia.). See page 19 for buffing pad selection Excellent tool for spot repair and buffing/polishing. Angle-head design permits access to difficult areas. Replacement buffing pads available. See page 19 for buffing pad selection. MACHINE SPECIFICATIONS Includes: ,300 RPM tool " Hook-Face Backing Pad (3/8"-24) " Terry Cloth Bonnet " Synthetic Wool Pad " Natural Wool Pad " White Polishing Foam Pad " Yellow Cutting Foam Pad oz. Finesse Creme oz. Dynabrade Glaze Random Orbit Sanding Head /4" Sanding Pad Sample 9-Micron 1-1/4" Abrasive Discs Dynaswivel Wrenches for Accessory Changes Deluxe Storage/Carry Case Model Motor Motor Pad Size Sound Spindle Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP RPM Inch Level Thread CFM/SCFM Thread Size PSIG Pound Inch Inch , db(a) 1/4"-20 male 3/22 1/4" NPT 3/8" /2 5-1/ , db(a) 3/8"-24 male 3/22 1/4" NPT 3/8" /4 5-1/ , db(a) 5/8"-11 male 3/27 1/4" NPT 3/8" / ,300-3, db(a) 3/8"-24 male 3/28 1/4" NPT 3/8" /8 2-1/2

28 28 for the Value-Minded Professional SLOW SPEED STRAIGHT-LINE DIE GRINDER Model /4" collet, 3,200 RPM. High torque and low speed make this tool ideal for tire buffing or pinstripe removal. Rear exhaust, directs air away from work. Safety-lock lever throttle. Composite grip absorbs vibration and reduces cold air transmission to the operator. SLOW SPEED EXTENSION DIE GRINDER Model /4" collet, 3,200 RPM. Rear exhaust, directs air away from work. Safety-lock lever throttle. An additional 4" of reach (over conventional die grinders) for recessed and difficult-to-reach areas. Composite grip absorbs vibration and reduces cold air transmission to the operator. MINI-STRAIGHT-LINE DIE GRINDERS Model Model /4" Collet 6 mm Collet 25,000 RPM. Compact, lightweight, easy to use design. Rear exhaust, directs air away from work. Safety-lock lever throttle. Smooth, efficient air motor with built-in speed regulator. Optional collet inserts: 1/8" (P/N 18432); 3 mm (P/N 18430). 7 OFFSET DIE GRINDER Model /4" collet, 20,000 RPM, front exhaust. 7 offset handle for comfort and control. Composite grip absorbs vibration and reduces cold air transmission to the operator. IT S GEARLESS! MACHINE SPECIFICATIONS Model Motor Motor Sound Air Flow Rate Air Inlet Hose Air Pressure Diameter Weight Length Height Number HP RPM Level CFM/SCFM Thread Size PSIG Inch Pound Inch Inch 18000/ , db(a) 3/28 1/4" NPT 3/8" / /2 1-3/ , db(a) 3/22 1/4" NPT 3/8" / / , db(a) 2/17 1/4" NPT 3/8" / /2 1-3/ , db(a) 2/17 1/4" NPT 3/8" / /4 1-3/4

29 for the Value-Minded Professional 29 MINI-RIGHT ANGLE DIE GRINDERS Model Model /4" Collet 6 mm Collet 20,000 RPM. Compact, lightweight design permits easy access to tight spots. Composite grip absorbs vibration and reduces cold air transmission to the operator. Rear exhaust, directs air away from work. Safety-lock lever throttle. Applications: high speed porting, blending, and deburring where clearance is a factor. Optional collet inserts: 1/8" (P/N 18432); 6 mm (P/N 18430). DIE GRINDER/ DISC SANDER KIT Two tools in one! Convenient for surface preparation, scuffing, deburring and light-duty general jobs. Kit comes complete with accessories for easy conversion between die grinder/disc sander. Includes: Model Die Grinder 20,000 RPM, rear exhaust, composite insulated grip; 3" hard density backup pad; 3" trial pack of assorted coated and non-woven nylon abrasives; /4"-20 shank; Dynaswivel ; deluxe storage/carry case. 3" DIA., STRAIGHT-LINE CUT-OFF WHEEL TOOL 3" DIA., 7 OFFSET CUT-OFF WHEEL TOOL Model ,000 RPM. Compact, lightweight design permits easy access to tight spots. Composite grip absorbs vibration and reduces cold air transmission to the operator. Safety-lock lever throttle. Rear exhaust, directs air away from work. Accepts 3" dia. cut-off wheels with 3/8" center hole. Cut sheet metal, frame rails, clamps, rusted bolts. Use on all kinds of metal cutting operations. Ideal for fiberglass, too! Model Accepts standard 3" wheels with 3/8" center hole. Front exhaust keeps work surface clear. Offset design provides maximum user comfort and control. Composite grip absorbs vibration and reduces cold air transmission to the operator. IT S GEARLESS! Green Corps Cut-Off Wheels Part Number Wheel Diameter Size " 1/16" Thick x 3/8" Hole IMPORTANT: Always use proper guards, wear eye gear and body protection. Never mount wheels which have lower RPM rating than the tool. MACHINE SPECIFICATIONS Model Motor Motor Sound Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP RPM Level CFM/SCFM Thread Size PSIG Pound Inch Inch , db(a) 3/28 1/4" NPT 3/8" /2 3-1/ , db(a) 3/22 1/4" NPT 3/8" / , db(a) 2/19 1/4" NPT 3/8" / , db(a) 2/19 1/4" NPT 3/8" /2 3

30 30 AUTOBRADE DIE GRINDER Model Powerful.5 Hp motor provides excellent torque for most jobs. Use with our carbide burr sets, see page 37. Composite handle insulates from cold air and provides durability. OUR 1/2 HORSEPOWER MODEL! for the Value-Minded Professional FOUR-IN-ONE VERSATILITY KIT /4" die grinder. 3" cut-off tool. Belt sander. 3" disc sander. Quick and convenient, easy to change accessories. A must for all shops! Includes: basic tool,.5 hp gearless 20,000 RPM motor, front exhaust, 7 offset composite handle with safety-lock throttle; Collet; Cut-Off Guard; Flange; " Backing Pad (3/8"-24); Drive Wheel; Belt Housing Assembly; Contact Arm Assembly; Dynaswivel ; wrenches for accessory changes; sample abrasive belt and 3" abrasive disc; deluxe storage/carry case. AUTO FILE II BELT TOOL 3/4" WIDE Model Includes Contact Arm for 3/4" x 18" long coated abrasive and non-woven nylon belts. 1/2" x 18" long belts also fit. Excellent multi-purpose tool for grinding sharp metal edges, rusted bolts, welds, etc. Works well on composites, blending, scuffing grooves and contours. Reach drip rails in auto trunks. Grinding head pivots and can be set to any position. STAR SANDER KIT USES SPINDLE-MOUNT STARS Variable-speed. Sanding stars are pre-mounted four per 1/4" shaft. Tool includes air-flow control Dynaswivel fitting for maximum tool maneuverability and control, and an assortment of sanding stars. Scuff composite bumpers, air damns, spoilers and many other uneven surfaces in automotive applications without damaging the profile. Also works great for preparing truck beds for spray-on coatings. Light deburring of metal or fabrication. 80, 120, and 220 grit stars included Contact Arm Contact Arm Additional contact arms available call for details. Dynacut Belts Width Length 60 Grit 80 Grit 120 Grit 3/4" 18" FLEXIBLE SANDING STARS REACH IRREGULAR AREAS! Non-Woven Nylon Belts Width Length Coarse Medium Very Fine Super Fine 3/4" 18" MACHINE SPECIFICATIONS Model Motor Motor Sound Spindle Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP RPM Level Thread CFM/SCFM Thread Size PSIG Pound Inch Inch , db(a) 3/8"-24 male 5/34 1/4" NPT 3/8" , db(a) 3/8"-24 male 2/17 1/4" NPT 3/8" / , db(a) 3/22 1/4" NPT 3/8"

31 for the Value-Minded Professional 31 MINI-RATCHETS Model Model /4" Drive 3/8" Drive Compact, lightweight ideal for confined working areas. Built-in speed control, rear exhaust. Easy on/off switch for loosening and tightening of bolts, nuts, etc. Insulated grip absorbs vibration and reduces cold air transmission to the operator. Applications: small fasteners, dashboard work, and general tasks around the shop where full-size ratchets are too big. Non-marring head cap protects work surfaces. RATCHET/ IMPACT WRENCH COMBO SET /4" Drive 3/8" Drive 1/2" Drive Includes ratchet and impact wrench both include composite insulated hand grips; deluxe storage/carry case. Ratchet has forward/reverse switch, protective non-marring head cap and center exhaust. Impact tool has forward/reverse action and rear exhaust /8" Kit includes Mini Ratchet. HEAVY-DUTY RATCHETS Model Model /8" Drive 1/2" Drive Easy on/off switch for loosening and tightening of bolts, nuts, etc. Built-in speed control, center exhaust. Insulated grip absorbs vibration and reduces cold air transmission to the operator. Applications: water pumps, radiators, exhaust systems, engine work, etc. Non-marring head cap protects work surfaces. IMPACT WRENCHES Model Model /4" Drive 3/8" Drive Easy on/off switch for loosening and tightening of bolts, lug nuts, etc. Insulated grip absorbs vibration and reduces cold air transmission to the operator. Rear exhaust. Adjustable torque settings. Applications: wheel work, exhaust systems, engine work, etc. Model /2" Drive Model Model Model MACHINE SPECIFICATIONS Model Torque Motor Sound Air Flow Rate Air Inlet Hose Air Pressure Diameter Weight Length Height Number ft/lbs. RPM Level CFM/SCFM Thread Size PSIG Inch Pound Inch Inch db(a) 1/11 1/4" NPT 1/4" / /2 1-1/ db(a) 1/11 1/4" NPT 1/4" / /2 1-1/ db(a) 2/17 1/4" NPT 1/4" / /2 1-3/ db(a) 2/17 1/4" NPT 1/4" / /2 1-3/ db(a) 2/17 1/4" NPT 1/4" / /2 1-3/ db(a) 2/17 1/4" NPT 1/4" / /2 1-3/ , db(a) 1/10 1/4" NPT 1/4" / /8 6-3/ , db(a) 2/25 1/4" NPT 3/8" / / , db(a) 3/28 1/4" NPT 3/8" / /4 7-3/4

32 32 Model Router Ideal for chamfers and roundover cuts on hardwoods and softwoods, solid surfaces or plastics. Use in custom fiberglass auto body work. Lightweight aluminum fixed base allows for 90-degree cuts. Base has easy height adjustment and is easily removed to create an instant 1/4" die grinder tool! Base measures 3-1/4" x 3-1/2". Collet depth: 1-5/8". Maximum cutter diameter: 1-1/8". Maximum height adjustment: 7/8". Uses high-speed steel router bits; 1/4" diameter shank capacity. With optional /8" Collet Insert, 1/8" diameter router bits may be mounted mm Insert is also available. Model Router Kit includes Router with six-piece Bit Set (1/4" veining, 3/8" corner round, 3/8" v-groove, 1/4", 3/8" and 1/2" straight bits). for the Value-Minded Professional ROUTER Easily Converts to Die Grinder! FULL 1/2 HORSEPOWER MOTOR! Model Ideal for engraving and marking equipment. Steel plate with hardness HRC 55 can be engraved continuously. Comfortable, easy to use design. Includes wood storage box and medium engraving tip. AIR-POWERED SCRIBE Available Replacement Tips Description Thin Medium Large Part Number PUT YOUR IDENTIFYING MARK ON TOOLS, TOOLBOXES, SHOP EQUIPMENT, ETC. MACHINE SPECIFICATIONS Model Motor Motor Sound Spindle Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height Number HP RPM Level Thread CFM/SCFM Thread Size PSIG Pound Inch Inch , db(a) 3/8"-24 Male 5/34 1/4" NPT 3/8" /2 Model Strokes Sound Air Flow Rate Air Inlet Hose Air Pressure Diameter Weight Length Height Number Per Minute Level CFM/SCFM Thread Size PSIG Inch Pound Inch Inch , db(a).07/7 1/4" NPT 1/4" 90 3/ /4

33 33 Features For hook n loop abrasives; soft foam increases conformability allowing operator to easily follow contours. Converts standard pad into a fine finishing and finessing pad! Interface pad easily contours to most surfaces. Attaches between sanding pad and hook n loop abrasive. White printed side attaches to standard hook-face pad. 1/2" Thick Foam Black hook side accepts conventional hook n loop abrasives. FOR RANDOM ORBITAL SANDERS FOR DYNALINE DETAIL SANDERS FOR BOARD SANDERS Non-Vacuum and Vacuum Orbitals Tear Drop and Triangle Dynaline and Dynabug Part No. Diameter Part No. Description Part No. Size Tool " /2" " Tear Drop Triangle /4" x 11" Dynaline /4" x 8" Dynaline " " /3" x 7" Dynaline Dynabug Thin sticky-back sheet adheres to current vinyl-face pad and accepts hook n loop abrasives. Peel-off liner with sticky-back adheres to operator's current vinyl-face pad. Hook-face material for accepting standard hook n loop abrasives. FOR RANDOM ORBITAL SANDERS FOR DYNALINE DETAIL SANDERS FOR BOARD SANDERS Non-Vacuum and Vacuum Orbitals Part No. Diameter " /2" " Tear Drop and Triangle Part No. Description Tear Drop Triangle Dynaline and Dynabug Part No. Size Tool /4" x 11" Dynaline /4" x 8" Dynaline " " /3" x 7" Dynaline Dynabug Non-Vacuum and Vacuum Orbitals Part No. Diameter " Thin velcro-backed sheet attaches to standard hook-face pad and accepts stick-on abrasives. Loop material attaches to standard hook-face sanding pad " Premium vinyl-face for stick-on abrasives.

34 34 All Couplers and Plugs Have a Ported Design for Maximum Air Flow! COUPLERS Available in 1/4", 3/8" and 1/2" female and male NPT styles. Durable nickel-plated steel and brass construction. Optimum flow capacity. Single action quick-connect by just inserting plug into coupler. Pull back on sleeve of coupler for quick disconnect. Part Number Thread Size Air Flow Range /4" Female NPT Up to 74 SCFM /4" Male NPT Up to 74 SCFM /8" Female NPT Up to 138 SCFM /8" Male NPT Up to 138 SCFM /2" Female NPT Up to 138 SCFM /2" Male NPT Up to 138 SCFM Female Coupler ASSEMBLIES Assembly includes one coupler and one plug. Available in 1/4", 3/8" and 1/2" female and male NPT styles. Maximum working pressure: 232 PSI. Temperature range: -4 F to 212 F. Part Number Coupler Thread Size Plug Thread Size /4" Female NPT 1/4" Male NPT /4" Female NPT 1/4" Female NPT /4" Male NPT 1/4" Male NPT /4" Male NPT 1/4" Female NPT /8" Female NPT 3/8" Male NPT /8" Female NPT 3/8" Female NPT /8" Male NPT 3/8" Male NPT /8" Male NPT 3/8" Female NPT /2" Female NPT 1/2" Male NPT /2" Female NPT 1/2" Female NPT /2" Male NPT 1/2" Male NPT /2" Male NPT 1/2" Female NPT Male Coupler Female to Male Assembly Female to Female Assembly PLUGS Available in 1/4", 3/8" and 1/2" female and male NPT styles. Durable zinc-plated steel construction. Plugs have ported design to prevent starving of the air tool. Provides up to twice the air flow compared to standard plug design. Part Number Thread Size Air Flow Range /4" Male NPT Up to 74 SCFM /4" Female NPT Up to 74 SCFM /8" Male NPT Up to 138 SCFM /8" Female NPT Up to 138 SCFM /2" Male NPT Up to 138 SCFM /2" Female NPT Up to 138 SCFM Male to Male Assembly Male to Female Assembly Female Plug AIR LINE TEST GAUGE Male Plug Use to test air line pressure at selected areas of an air supply system. Comes complete with brass T connector, quick disconnect coupler and a round pressure gauge.

35 35 All Couplers and Plugs Have a Ported Design for Maximum Air Flow! COUPLERS Available in 1/4" female and male NPT styles. Lightweight 1.4 oz., non-marring composite material. Heavy duty construction. Optimum flow capacity. Shock-proof, low-vibration, crush-resistant. ASSEMBLIES Available in 1/4" female and male NPT styles. Assembly includes one Composite-Style Coupler and one plug. Maximum working pressure: 150 PSI. Temperature range: -4 F to 212 F. Part Number Thread Size Air Flow Range /4" Female NPT Up to 83 SCFM /4" Male NPT Up to 83 SCFM Female Coupler Part Number Coupler Thread Size Plug Thread Size /4" Female NPT 1/4" Male NPT /4" Female NPT 1/4" Female NPT /4" Male NPT 1/4" Male NPT /4" Male NPT 1/4" Female NPT Female to Male Assembly Male Coupler Female to Female Assembly Easy Push-Button Action to Connect / Disconnect! Male to Male Assembly PLUGS Available in 1/4", 3/8" and 1/2" female and male NPT styles. Durable zinc-plated steel construction. Plugs have ported design to prevent starving of the air tool. Provides up to twice the air flow compared to standard plug design. Male to Female Assembly Part Number Thread Size Air Flow Range /4" Male NPT Up to 74 SCFM /4" Female NPT Up to 74 SCFM Female Plug Male Plug

36 36 Never Fight an Air Hose Again! The Dynaswivel is a universal-joint that connects portable air tools to an air line. It improves tool maneuverability, minimizes operator fatigue and extends hose life. Patented; works great on air tools or paint guns. Choose from the most popular original Dynaswivel style: SWIVELS 360 AT TWO LOCATIONS which allows air hose to drop straight to the floor, no matter how the tool is held. OR, choose from the single pivot style: Right angle, single pivot swivels 360 at one location. Permits 360 maneuverability of tool, while air hose extends horizontally. 1/8" NPT MODEL 1/4" NPT MODEL /4" NPT and 1/8" NPT; fits small air tool. Air flow: up to 25 SCFM. Weight: 0.19 lb Air flow: up to 25 SCFM. Aluminum design original Dynaswivel Air flow: up to 33 SCFM. Non-marring lightweight composite construction. Allows greater air flow than the original model (see P/N 95460) Air flow: up to 46 SCFM. Built-in dial allows for air flow control. 1/4" NPT, COMPOSITE MODEL OUR BEST SELLER! 1/4" NPT, FLOW CONTROL, COMPOSITE MODEL Air flow: up to 25 SCFM. Built-in dial allows for air flow control Air flow: up to 25 SCFM. 1/4" NPT, FLOW CONTROL MODEL 1/4" NPT, SINGLE-PIVOT MODEL 3/8" NPT MODEL 3/8" NPT, SINGLE-PIVOT MODEL Air flow: up to 26 to 45 SCFM Air flow: up to 26 to 45 SCFM. 1/2" NPT MODEL 1/2" NPT, SINGLE-PIVOT MODEL Air flow: up to 46 to 65 SCFM Air flow: up to 46 to 65 SCFM. 3/4" NPT MODELS DYNASWIVEL STORE COUNTER DISPLAY PACK Air flow: above 65 SCFM Ten /4" NPT Dynaswivel Air Line Connectors in a refillable display box. Convenient way to buy! IMPORTANT: 150 PSI maximum on all models. Do not use on percussion tools or in areas of high mechanical abuse. NOTE: Do not exceed recommended torque value of 20 ft. lbs.

37 37 DYNABURR CARBIDE BURRS Used for grinding, deburring, and finishing on stainless steel and other metals. Lifetime warranty on breakage /4" carbide burr kit with 8 burrs Cylinder Cylinder Cylinder Radiused End Connects only one time... mounts permanently between a coupler and air hose. Small, lightweight design, durable, aluminum construction, weighs only 2 oz. Each unit has 1/4" female NPT thread at both ends for easy installation. Purges air lines of water and/or contaminants before starting up air tools. Clean off work pieces and/or work stations after grinding and sanding. Recommended air flow range on both models is up to 35 SCFM. Model meets O.S.H.A. requirements of special relief hole in nozzle which limits pressure to 30 PSI when dead ended and used on an air line of 150 PSI or less Standard model Safety tip model. DYNAJET IN-LINE BLOW GUNS Cylinder Radiused End Ball Oval Tree Radiused End Taper Radiused End /8" carbide burr kit with 12 burrs Cylinder Cylinder Provides accurate air pressure regulation, two stage filtration of water/contaminants and lubrication of pneumatic components Small F-R-L PSI, 3/8" NPT female ports. FILTER-REGULATOR-LUBRICATORS Cylinder Radiused End Tree Pointed End Cylinder Radiused End Flame Ball Taper Radiused End Oval Degree Cone DYNABRADE AIR LUBE Highly recommended in use of all Dynabrade tools. Absorbs up to 10% of its weight in water. Prevents rust and formation of gum and sludge. Keeps pneumatic tools operating longer with greater power and less downtime oz pt gal Display box of 24 4 oz. bottles (95821) Tree Radiused End Degree Inverted Cone Large F-R-L Up to PSI, 1/2" NPT female ports. Filter Only Small Filter PSI, 3/8" female inlet thread Large Filter PSI, 1/2" female inlet thread. Regulator Only Small Regulator PSI, 3/8" female inlet thread Large Regulator PSI, 1/2" female inlet thread. Lubricator Only Small Lubricator PSI, 3/8" female inlet thread Large Lubricator PSI, 1/2" female inlet thread Filter-Regulator Small Filter-Regulator PSI, 3/8" female inlet thread Large Filter-Regulator PSI, 1/2" female inlet thread. Regulator-Lubricator Small Lubricator-Regulator PSI, 3/8" female inlet thread Large Lubricator-Regulator PSI, 1/2" female inlet thread.

38 38 Ideal for Use with All Dynabrade and Other Manufacturer s Central-Vacuum Air Tools Offers a cost-effective solution to expensive overhead central-vacuum systems, plus portability, convenience and versatility. Features on Models 64600/64605 Only Low Sound Environment Meets and exceeds OSHA requirements for noise level output, 58 db(a). Increases productivity, safer work place where audible communication is required. Efficient Operation Conserves Electricity Auto start/stop: Controls vac motor start/stop on demand from hand tool lever. Multi-Tool Operation Designed to operate up to four air tools and one electric tool independently or simultaneously for maximum use of vacuum system. Powerful Vacuum Provides 120 CFM of vacuum, 90" of water lift, for a wide range of cleaning applications. 1-Micron Filter Efficient, cleanable and replaceable air filter element H.E.P.A. Filter Kit (.3-micron capacity) is available. Adjustable Vacuum Suction Rheostat motor control allows for variable vacuum suction. Anti-Static Operation Complete vacuum system fully grounded. Suction hose and connectors are manufactured from conductive materials to eliminate static electric build up. Cyclonic Effect Offset inlet fitting provides even filling of canister and disperses debris away from filter element. 10 GALLON SYSTEM 17 GALLON SYSTEM Model One Tool Operation: Includes one each of the following accessories: Filter Bag Filter Element Hose Assembly Cuff Adapter Two Tool Operation: You will need additionally one each of the following accessories: Hose Assembly T Connector Inlet Connector Y Connector Cuff Adapter Shown with standard/optional accessories. BASIC SHOP-VAC ONLY Model Two Tool Operation: Includes each of the following accessories: (1) Filter Element (2) Hose Assembly (1) Filter Bag (1) Inlet Connector (1) Y Connector (2) Cuff Adapter Four Tool Operation: You will need 2 each of the following accessories: Hose Assembly T Connector Inlet Connector Y Connector Cuff Adapter VACUUM SYSTEM ACCESSORIES Model Gallon Vacuum System AC (electric) 110 v. Does not include any air lines, auto on/off switch or adjustable vacuum suction. Model Gallon Vacuum System AC (electric) 110 v. Does not include any air lines, auto on/off switch or adjustable vacuum suction. SHOP VACUUM TOOL KIT Includes 13' long x 1-1/2" dia. vac hose, metal curved want attachment, 2-piece stainless steel extension rod, floor nozzle, crevice tool, and claw nozzle. Easily converts any of our portable vacuum systems into a general purpose shop-vac Filter Bags Package of 5, for Gallon System Filter Element 1-micron filter (for all systems). Reusable and washable Hose Assembly Connects air tools to vacuum. Includes 1/4" air hose and 1-1/4" x 16' vacuum hose Hose Assembly Includes 3/8" air line and 1-1/4" x 16' vacuum hose T Connector Used to convert air line systems to allow multi-tool operation Hose Assembly Connects air tools to vacuum. Includes 1/4" air hose and 1-1/4" x 25' vacuum hose Filter Bags Package of 5, for Gallon System Inlet Connector Used to connect Y connector to vacuum port Y Connector Used to connect two hose assemblies to one vacuum port on the system Cuff Adapter Connects hose assembly to tool with 1-1/4" vacuum port Cuff Adapter Connects hose assembly to tool with 1" vacuum port Hose Cuff 1-1/4" to 1-1/4" vacuum hose threads. Needed to connect two 1-1/4" dia. vacuum hoses.

39 39 Keep Shop Area Free of Dust While Sanding, Grinding, Etc. Easy to use, safe, unlike flimsy fender stands. No vacuum-type tools needed; use any sander/grinder. Keep machine on even when not in use table actually filters air to help clean the shop environment. Great for sanding: Fiberglass spoilers and wings Motorcycle frames, fenders and gas tanks Bumper covers Doors and quarter panels Custom car, truck and van parts, etc " wide x 60" long working area " wide x 72" long working area. Features Dual filtration includes three 20" wide x 25" long x 2" thick, 1-micron pleated filters, and one 5-micron pre-filter blanket. Includes 5" diameter casters. Rubberized surface on the tabletop is anti-static and anti-slip. Both tables include steel utility tray and random orbital sander hanger. STANDARD DUTY MODELS Specifications Power Source: One heavy duty electric motor, 1.0 Hp Vacuum Suction: 3,000 SCFM Electric Capacity: 110 volt, 220 volt (single phase). Three phase available upon request. Sound Level: 72 db(a) Height: 36" (including casters) Shipping Weight: Model 64699: 285 lbs., Model 64700: 365 lbs. Two Paper Filter Sizes Available: 64671: 20" wide x 25" long x 2" thick standard paper air filter 64672: 20" wide x 25" long x 2" thick UL rated class I non-flammable air filter (recommended when sanding bare metal). (Arrows Indicate Air Flow) " wide x 96" long working area. Includes six 20" x 25" paper filters (64658) and four 16" x 25" paper filters (64659). Features Dual filtration 5-micron pre-filter and 1-micron paper filters. High quality reverse incline blowers. Heavy duty TEFC twin electric motors. Non-slip surface for easier tool maneuverability. Up to 70% more filter area than competitive brands. Base unit is all-metal construction with CNC milled 3/4" MDF tabletop. Optional anti-static and anti-slip mat available (P/N 64970) as well as optional 5" diameter casters. HEAVY DUTY MODEL (Arrows Indicate Air Flow) Specifications Power Source: Two heavy duty TEFC electric motors, 1.5 Hp Vacuum Suction: Approximately 6,000 CFM Electric Capacity: 115 volt (single phase). 208 volt (three phase), 230 volt (single phase), 230 volt (three phase), 460 volt (three phase) available upon request. Sound Level: 72 db(a) Shipping Weight: 820 lbs.

40 /2 feet long with one cuff feet long with two cuffs. 3/4" DIAMETER EXHAUST HOSES 1" DIAMETER EXHAUST HOSES Hose by-the-foot (no cuffs). Specify length desired. Order Factory-Installed Cuffs, if desired inches long with two cuffs feet long with two cuffs /2 feet long with one cuff feet long with two cuffs Hose-by-the-foot (no cuffs). Specify length up to 50 feet. Order Factory-Installed Cuffs, if desired /2 feet long (no cuffs). 1-1/4" DIAMETER EXHAUST HOSES Hose-by-the-foot (no cuffs). Specify length up to 50 feet. Order Factory-Installed Cuffs, if desired. 1-1/2" DIAMETER EXHAUST HOSES Hose-by-the-foot (no cuffs). Specify length up to 50 feet. HOSE CUFFS /4" Thread 3/4" I.D. Non-Thread 1-1/4" Thread 1" I.D. Non-Thread 2" I.D. Non-Thread 1-1/2" Thread " Thread 1" I.D. Non-Thread Cuff swivels. 1-1/4" Thread 1" I.D. Non-Thread Swivel cuff. 2-1/4" I.D. Non-Thread 1-1/4" Thread Use optional Insert to mount to tool s vacuum outlet on non-thread end /2" I.D. Non-Thread 1-1/4" Thread Keeps air line out of the way. 1-1/4" Thread /4" I.D. Non-Thread Use optional Insert to mount to tool s vacuum outlet; or Hose Cuff for 1" exhaust hose. 1-1/2" Thread 1" I.D. Non-Thread 1-1/4" Thread 1-1/2" Thread 1-1/2" Thread 1-1/4" I.D. Non-Thread Includes Cuff Adapter and " Swivel Cuff Use to connect two 1-1/4" hoses Use with optional Hose Cuff for 1" Exhaust Hose. 1-1/4" Thread 1-1/4" Thread 1-1/2" Thread 1" I.D. Non-Thread 2" Thread 1-1/4" I.D. Non-Thread

41 41 AIR LINE HOSES REUSABLE CLOTH BAGS feet long, with male and female fittings inches long with male and female fittings. Eliminates kinking. Tough, flexible and lightweight. Fittings swivel 360 for easy use /4" air line custom length, no fittings (specify length). Use below One set, factory-installed male and female fittings. SWIVEL AIR LINE HOSES /8" I.D. with two 1/4" male fittings. 8 feet long /2" I. D. with male and female fittings. 5 feet long With zipper. Both these collection bags measure 14-1/2" long x 7-1/2" wide and connect to vacuum hose. 5-micron filtration With hook n loop closure " long x 3" wide bag connects to vac hose or directly to tool. Has hook n loop closure. 5-micron filtration Air line 1/4" dia. x 28" long. MINI-REUSABLE CLOTH BAGS Flex-hose 1" dia x 18" long Mini-Reusable Cloth Bag Rubber Connectors (5) which connect air line to exhaust hose Part No. Description Hose Dia. Length /4" Female to 1/4" Male 1/4" 3 ft /4" Female to 1/8" Male 1/4" 3 ft /4" Female to 1/4" Male 1/4" 6 ft /4" Female to 1/8" Male 1/4" 3 ft Hose by the foot (no fittings). Order fittings separately, if desired. 1/4" Custom /4" NPT Female Fitting For 1/4" Hose /4" NPT Male Fitting For 1/4" Hose /8" NPT Male Fitting For 1/4" Hose /4" NPT Female Fitting For 3/8" Hose /4" NPT Male Fitting For 3/8" Hose 6' LONG FLEX-HOSE SYSTEMS Has Standard Reusable Cloth Bag with hook n loop for easy emptying Has Zipper-Lock Bag. Both systems include 6' long Flex-Hose. Shown with optional Air Line (1/4") EXHAUST HOSE ASSEMBLY " diameter x 10' long Flex Hose (1" dia., 10' long with cuffs) Air Line (1/4" dia., 11' long) Rubber Connectors. Use with Dynorbital sanders. HOSE COVER ' long cloth cover. Covers air line and exhaust/vacuum hoses (not included). Eliminates damage from hoses dragging on the workpiece. RUBBER CONNECTORS Five per package. Used to strap tool air line to tool s exhaust hose for easy all-in-one maneuverability. BAG-IN-A-BOX SYSTEM Includes: Air Line 11' long, Flex-Hose (1" dia. x 10' long), Rubber Connectors (5) and Durable Box Receptacle. Sample paper bag included. Paper bag reorder: (400/case) or (24/pkg.) Longer hose lengths available for both systems! Also available without bag and box: Order Hose Assembly which includes 95816, 95709, and described above Mounts directly to air tool. IN-LINE SPEED REGULATORS /4" NPT connection (up to 25 CFM) /8" NPT connection (up to CFM)

42 42 MINI-DYNORBITAL SANDING PADS HOOK-FACE PADS Part Pad Description Thread No. Dia. Face Type Comments /4" Medium/Rubber 1/4"-20 Female For PSA Discs /4" Medium/Rubber 1/4"-20 Female For PSA Discs /4" Soft Locking-Type For PSA Discs /4" Very Soft 1/4"-20 Female For PSA Discs /4" Very Soft 1/4"-20 Female For PSA Discs /4" Soft/Vinyl 1/4"-20 Female For PSA Discs /4" Soft/Vinyl 1/4"-20 Female For PSA Discs /4" Hook-n -Loop 1/4"-20 Female NWN Discs /4" Hook-n -Loop 1/4"-20 Female NWN Discs DYNAPAD TYPE-R SERIES LOCKING-TYPE DISC PADS Pads have a hard density and are female threaded Part No. Diameter Thread Size Description " 1/4"-20 Female Foam Backing " 3/8"-24 Female Foam Backing " 1/4"-20 Female Rigid Backing " 3/8"-24 Female Rigid Backing " 1/4"-20 Female Rigid Backing " 5/8"-11 Female Foam Backing " 5/8"-11 Female Foam Backing " 5/8"-11 Female Rigid Backing " M-14x2 Female Rigid Backing Note: 3" dia. with 3/8"-24 female available for other tools. 6" BUFF FOR RANDOM ORBITAL SANDERS Disc Female Part Maximum Operating Diameter Thread Number Speed (RPM) 2" 1/4" ,000 2" 3/8" ,000 3" 1/4" ,000 3" 3/8" ,000 4" 3/8" , Built-in backing plate has 5/16"-24 male stud to fit sander. 2" thick foam pad has flat face to eliminate swirl marks and restore gloss. Multi-purpose grease for all types of bearings, cams, gears. High film strength: excellent resistance to water, steam, etc. Workable range 0 to 300. GREASE & GREASE GUN DYNAPAD TYPE-R SERIES PAD ASSEMBLIES Includes locking-type pad with shank " hard pad ( /4"-20) with Shank " hard pad ( /4"-20) with Shank " hard pad ( /8"-24) with 3/8"-24 male to 5/8"-11 female adapter /8"-24 male to 5/8"-11 female thread. THREADED SHANK ADAPTERS Has 1/4" diameter shank, 1/4" - 20 male thread. Mounts to 1/4" and 6 mm collets. Wrench flats: 7/16" Push-type grease gun (one-hand operation) oz. tube. DYNABRADE FINESSE CREME AND GLAZE Finesse Sanding Creme is a sanding compound for metal, fiberglass and composites; use with fine-grade sanding discs. Glaze is for use with slow-speed tools to achieve a high-gloss finish after compounding oz. Finesse Creme qt. Finesse Creme gal. Finesse Creme oz. Glaze qt. Glaze

43 43 RANDOM ORBITAL SANDER AND DYNABUG MODEL T SANDER PSA DISCS NOTE: All 3-1/2" discs are blank. No holes needed in paper. Vacuum pick-up is around outside of pad. Sold in complete rolls only. 3-1/2" Aluminum Oxide PSA Discs Part No. Abrasive Grit Quantity Per Roll " Aluminum Oxide PSA Discs Part # No Holes Part # w/holes Abrasive Grit Quantity Per Roll " Silicon Carbide PSA Discs Part # No Holes Part # w/holes Abrasive Grit Quantity Per Roll " Aluminum Oxide PSA Discs Part # No Holes Part # w/holes Abrasive Grit Quantity Per Roll " Silicon Carbide PSA Discs Part # No Holes Part # w/holes Abrasive Grit Quantity Per Roll SCALLOPED-EDGE ABRASIVE DISCS GREAT FOR RADIUS SANDING! 3-1/2" Hook-Backed Discs Part No. Abrasive Grit * Maroon Scuff - Fine * Gray Scuff - Very Fine * Abrasive Impregnated Non-Woven Nylon. 4-1/2" x 4-1/4" Sheets (PSA With Liner) Part No. Type Grit Vacuum Vacuum Vacuum Non-Vacuum Non-Vacuum Non-Vacuum Non-Vacuum 320 5" Hook-Backed Discs Part No. Abrasive Grit * Maroon Scuff - Fine * Gray Scuff - Very Fine DYNABUG MODEL T SANDER ABRASIVE SHEETS 4-1/2" x 5-1/2" Sheets for Clips (No Adhesive) 4-1/2" x 4-1/4" Hook-Backed Sheets Part No. Type Grit Part No. Abrasive Grit Non-Vacuum Non-Vacuum Non-Vacuum Non-Vacuum

44 44 8" RANDOM ORBITAL AND GEAR-DRIVEN SANDER COATED ABRASIVE DISCS 8" Aluminum Oxide PSA Discs Part No. Type Quantity Per Roll Non-Vacuum Non-Vacuum Non-Vacuum Vacuum Vacuum Vacuum 120 8" Aluminum Oxide Hook-Backed Discs Part No. Type Quantity Per Roll Non-Vacuum Non-Vacuum Non-Vacuum Vacuum Vacuum Vacuum 120 DYNABUG ORBITAL JITTERBUG AND DYNALINE IN-LINE 8" SANDER ABRASIVE ROLLS (NO HOLES) Aluminum Oxide PSA Mounted Rolls Part No. Width Grit /4" /4" /4" /4" /4" /3" /3" /3" /3" 180 NOTE: Grits available upon request. 80 Grits - 25 yds. per roll; 120 Grit - 30 yds. per roll, 150 Grit and finer - 45 yds. per roll; Sold in complete rolls only. Cut to desired length. Silicon Carbide PSA Mounted Rolls ( A Weight) Part No. Width Grit /4" /4" /4" /4" /3" /3" /3" /3" /3" 320 NOTE: Grits available upon request. 100 and 200 Grits - 35 yds. per roll; 150 Grit and finer - 50 yds. per roll; Sold in complete rolls only. Cut to desired length. DYNABUG ORBITAL JITTERBUG AND DYNALINE IN-LINE 8" SANDER ABRASIVE SHEETS 2-3/4" Wide x 8" Long Aluminum Oxide Sheets, ( A Weight) PSA Mounted with Liner Part # (No Holes) Part # (6 Holes) Abrasive Grit /3" Wide Hook-Backed, Non-Vacuum, Aluminum Oxide Sheets ( A Weight) PSA Mounted with Liner Part No. Abrasive Grit /3" Wide x 7" Long Aluminum Oxide Sheets, ( A Weight) PSA Mounted with Liner Part # (No Holes) Part # (6 Holes) Abrasive Grit Non-Woven Nylon Sheets Part No. Size Abrasive Grade Color /4" x 8" Very Fine Maroon /4" x 8" Medium Gray " x 7" Very Fine Maroon " x 7" Medium Gray

45 45 MINI-DYNAFILE II ABRASIVE BELTS 12" Coated Abrasive Belts Belt Width 40 Grit 60 Grit 80 Grit 120 Grit 180 Grit 220 Grit 320 Grit 1/8" /4" /2" " Non-Woven Nylon Belts Belt Width Super Fine Very Fine Medium Coarse Width Gray ( ) Blue ( ) Maroon ( ) Brown (80-150) 1/2" AUTO FILE II ABRASIVE BELTS 18" Coated Abrasive Belts Belt Width 40 Grit 60 Grit 80 Grit 120 Grit 180 Grit 220 Grit 320 Grit 1/2" /4" " Non-Woven Nylon Belts Belt Width Type T Super Fine Very Fine Medium Coarse Width Polishing Gray ( ) Blue ( ) Maroon ( ) Brown (80-150) 1/4" /2" /4" PALM-STYLE MINI-DYNORBITAL SANDER, 3/4" TO 1-1/4" DIAMETER DISCS Silicon Carbide Discs PSA Mounted Part No. Size Abrasive Grit /4" /4" /4" /4" /4" /4" /4" /4" 220 NOTE: 3/4" discs - 75 per sheet; 1-1/4" discs - 25 per sheet. Both available in complete sheets only. Micro-Finishing Film Discs PSA Mounted Aluminum Oxide Part No. Size Abrasive Grit /4" 1,000 (9 micron) /4" 1,000 (9 micron) High Strength Non-Woven Nylon Discs Part No. Diameter Abrasive Grade /4" Very Fine /4" Medium /4" Very Fine /4" Medium COATED ABRASIVE SANDING STARS 4" Diameter Aluminum Oxide Spindle-Mount Stars Part No. Grit Label Color Part No. Grit Label Color

46 46 DYNAFINE SANDER ABRASIVES Ceramic Coated Aluminum Oxide Roloc Locking-Type Discs Disc Diameter 36 Grit 60 Grit 80 Grit 120 Grit 2" " " Non-Woven Nylon Roloc Locking-Type Discs Disc Dia. Super Fine Very Fine Medium Coarse SE Coarse 2" " " " Pad Trial Pack Abrasive/Pad Trial Packs Part No. Pad Dia. Female Thread " 1/4" " 3/8" " 1/4" " 3/8" " 1/4" " 3/8"-24 to 5/8"-11 Includes locking-type pads and an assortment of coated and non-woven nylon discs for grinding, cleaning, coatings removal, deburring, surface conditioning. Cut-Off Wheels Part No. Description " Dia. x 1/16" Thick (3/8" Dia. Hole) " Dia. x 1/32" Thick (3/8" Dia. Hole) Ceramic Coated Aluminum Oxide Flange Mounted 7/8" Center Hole Part No. Disc Diameter Abrasive Grit /2" /2" /2" /2" 120 Triangular and Tear-Drop Shapes Triangular Abrasives Coated Aluminum Oxide Uses Hook-Face Pad Uses PSA Pad Abrasive Part No. Part No. Grit Non-Woven Nylon Part No. Abrasive Grade Coarse Medium Fine Super Fine NOTE: Uses Hook-Face Pad. Sponge Aluminum Oxide PSA with Liner Part No. Abrasive Grade Coarse Medium Fine Super Fine NOTE: Uses Vinyl-Face Pad. NOTE: Triangular Abrasive Kit is available which includes an assortment of the above items. Tear-Drop Abrasives Coated Aluminum Oxide Uses Hook-Face Pad Uses PSA Pad Abrasive Part No. Part No. Grit Non-Woven Nylon Part No. Abrasive Grade Coarse Medium Fine Super Fine NOTE: Uses Hook-Face Pad. Sponge Aluminum Oxide PSA with Liner Part No. Abrasive Grade Coarse Medium Fine Super Fine NOTE: Uses Vinyl-Face Pad. NOTE: Tear-Drop Abrasive Kit is available which includes an assortment of the above items.

47 47 SANDING PAD STORE COUNTER DISPLAY PACK Each display pack consists of ten pads in a refillable Dynabrade display box. These are our premium urethane balanced random orbital sanding pads. All pads have a 5/16"-24 male thread. Fit most other brands of sanders also. Heavyweight knit 100% cotton with knit collar and cuffs. Embroidered orange/white logo. Specify Size: M, L, XL, XXL Black DYNABRADE GOLF SHIRTS Blue Part Number Contents " Non-Vac " Vacuum " Non-Vac " Vacuum DYNASWIVEL STORE COUNTER DISPLAY PACK % cotton, 50% polyester orange/white silk screened logo. Specify Size: M, L, XL, XXL Colors Available: White, Black DYNABRADE RACING T-SHIRTS Ten /4" NPT Dynaswivel Air Line Connectors in a refillable display box. IMPORTANT: 150 PSI maximum on all models. Do not use on percussion tools or in areas of high mechanical abuse. NOTE: Do not exceed recommended torque value of 20 ft. lbs. DYNABRADE BASEBALL CAPS Low profile, embroidered orange/white logo on 100% brushed cotton. Fully adjustable strap with brass buckle. THINK SAFETY All Dynabrade products are built with the highest level of quality and performance. An understanding of the proper use and safe procedures of power tools is our primary concern. Accidental injury or death can be prevented. 1. General Industry Safety and Health Regulations, Part 1910, OSHA 2206, available from: Sup t of Documents, Gov t Printing Office, Washington, D.C ALWAYS COMPLY WITH: 2. Safety Code For Portable Air Tools ANSI B186.1, B7.1, and, Z87.1 available from: American National Standards Institute, Inc., 1430 Broadway, New York, NY State and Local Regulations. CUSTOMER SERVICE For More Information, Prices or a Demonstration, Contact Your Local Dynabrade Jobber or Call/Fax One of Our Customer Service Information Numbers: USA: Telephone: 1-800/ Fax: 716/ Canada: Telephone: 1-800/ Fax: 716/ (Canada/International) Try Our New Toll-Free Consumer Information Number (USA/Canada): DYNABRADE autoaft@dynabrade.com

48 48 Model Description Page No. Model Description Page No Dynabug Sander with 3/32" Orbit (Non-Vac) Dynabug Sander with 3/32" Orbit (Basic-Vac) Dynabug Sander with 3/32" Orbit (Central Vac-Ready) " Dynabuffer " Dynabuffer w/hanger Bracket " Wet Model T w/hook Pad " Wet Model T w/hook Pad /2" Wet Dynorbital Supreme ROS " Wet Dynorbital Supreme ROS " Wet Dynorbital Supreme ROS /2" Dynorbital Scrubber 10,000 RPM /2" - 3/32" Dia. Orbit Wet Dynorbital Supreme " - 3/32" Dia. Orbit Wet Dynorbital Supreme " - 3/32" Dia. Orbit Wet Dynorbital Supreme /4" Mini-Dynorbital Sander 5,000 RPM Palm-Style... 18, " Buffer 2,400 RPM Palm-Style Mini-Random Orbital Sander 2,400 RPM Palm-Style " Buffer Sander Versatility Kit 2,400 RPM Palm-Style " Palm-Buffer 2,400 RPM Palm-Style Dynaline Sander (Non-Vac) Dynaline Sander (Basic-Vac) Dynaline Sander (Cen Vac-Ready) " Two-Hand Dynorbital Sander 10,000 RPM (Non-Vac) " Two-Hand Dynorbital Sander 10,000 RPM (Vac-Ready) " Two-Hand Dynorbital Sander 10,000 RPM (Basic-Vac) " Two-Hand Dynorbital Sander 10,000 RPM (Cen Vac-Ready) " Two-Hand Dynorbital Sander 10,000 RPM (Non-Vac) " Two-Hand Dynorbital Sander 10,000 RPM (Vac-Ready) " Two-Hand Dynorbital Sander 10,000 RPM (Basic-Vac) " Two-Hand Dynorbital Sander 10,000 RPM (Cen Vac-Ready) Model T 1/4" Sheet Sander w/thin Vinyl Pad Model T 1/4" Sheet Sander w/hook Pad Model T 5" Round w/vinyl Pad Model T 5" Round w/hook Pad Model T 1/4" Sheet Sander w/thick Vinyl Pad Model T 6" Round w/vinyl Pad Model T 6" Round w/hook Pad Model T w/vinyl Pad Central Vac Model T w/hook Pad Central Vac Model T w/vinyl Pad Self-Generated Vac Ready Model T w/hook Pad Self-Generated Vac Ready " Two-Hand Gear Driven Sander 900 RPM (Non-Vac) " Two-Hand Gear Driven Sander 900 RPM (Central Vac) " Dynalocke (Non-Vac) " Dynalocke (Vac-Ready) " Dynalocke (Basic-Vac) " Dynalocke (Central Vac) " Dynalocke (Non-Vac) " Dynalocke (Vac-Ready) " Dynalocke (Basic-Vac) " Dynalocke (Central Vac) " File Board Sander " File Board Sander Kit " Right Angle Buffer/Polisher " Right Angle Buffer/Polisher Mini-Dynorbital Versatility Kit " Two-Hand Dynorbital Supreme 10,000 RPM (Non-Vac) " Two-Hand Dynorbital Supreme 10,000 RPM (Vac-Ready) " Two-Hand Dynorbital Supreme 10,000 RPM (Basic-Vac) " Two-Hand Dynorbital Supreme 10,000 RPM (Central Vac) " Gear Driven Orbital Sander (900 RPM) Non-Vac " Gear Driven Orbital Sander (900 RPM) Central Vac-Ready Dynafine Detail Sander Dynafine Detail Sander Versatility Kit Dynafine Finger Sander Dynafine Finger Sander Versatility Kit " Two-Hand Dynorbital Supreme 12,000 RPM 3/8" Orbit (Non-Vac) " Two-Hand Dynorbital Supreme 12,000 RPM 3/8" Orbit (Basic-Vac) " Two-Hand Dynorbital Supreme 12,000 RPM 3/8" Orbit (Central Vac) " Two-Hand Dynorbital Supreme 12,000 RPM 3/8" Orbit (Deluxe-Vac) " Two-Hand Dynorbital Supreme 12,000 RPM 3/8" Orbit (Basic-Vac) " Two-Hand Dynorbital Supreme 12,000 RPM 3/8" Orbit (Central Vac) Mini-Dynafile II Mini-Dynafile II Versatility Kit Mini Straight-Line Die Grinder, 25,000 RPM, 1/4" Collet Mini Straight-Line Die Grinder 25,000 RPM 6mm Collet Mini Right-Angle Die Grinder, 20,000 RPM, 1/4" Collet Mini Right-Angle Die Grinder 20,000 RPM 6 mm Collet Mini Right-Angle Die Grinder/Disc Sander Kit Die Grinder, 20,000 RPM, 1/4" Collet Four Tools In One Versatility Kit /4" Mini-Ratchet /8" Mini-Ratchet /4" Ratchet/Impact Wrench Combo Set /8" Ratchet/Impact Wrench Combo Set /2" Ratchet/Impact Wrench Combo Set /8" Heavy-Duty Ratchet /2" Heavy-Duty Ratchet... 31

49 49 Model Description Page No. Model Description Page No " - 8" Dia. Buffer " Dia. Buffer (3/8"-24 male spindle) " Autobrade Buffer, 3,200 RPM " Dia. Buffer/Sander Kit /4" Impact Wrench /8" Impact Wrench /2" Impact Wrench " Dia. Straight-Line Cut-Off Wheel Tool " Dia. 7 Cut-Off Wheel Tool /4" Auto File II Belt Tool Air Scribe " Dia., 7 Disc Sander " Dia., 7 Disc Sander Straight-Line Die Grinder, 3,200 RPM, 1/4" Collet Straight-Line Extension Die Grinder, 3,200 RPM, 1/4" Collet Straight-Line Die Grinder, 20,000 RPM, 1/4" Collet Router Router Kit Sanding Star Sanding Kit Dynazip Air Tool Dynazip Air Tool Versatility Kit Dynazip Air Tool Deluxe Kit Dynazip-Eraser Decal Removal Air Tool " Dynorbital-Spirit ROS (Non-Vac) " Dynorbital-Spirit ROS (Basic-Vac) " Dynorbital-Spirit ROS (Central Vac-Ready) /2" Dynorbital-Spirit ROS (Non-Vac) /2" Dynorbital-Spirit ROS (Basic-Vac) /2" Dynorbital-Spirit ROS (Central Vac-Ready) " Dynorbital-Spirit ROS (Non-Vac) " Dynorbital-Spirit ROS (Basic-Vac) " Dynorbital-Spirit ROS (Central Vac-Ready) " Dynorbital-Spirit ROS (Non-Vac) " Dynorbital-Spirit ROS (Basic-Vac) " Dynorbital-Spirit ROS (Central Vac-Ready) " Dynorbital-Spirit ROS (Non-Vac) " Dynorbital-Spirit ROS (Basic-Vac) " Dynorbital-Spirit ROS (Central Vac-Ready) /2" Dynorbital-Spirit ROS (Non-Vac) /2" Dynorbital-Spirit ROS (Basic-Vac) /2" Dynorbital-Spirit ROS (Central Vac-Ready) " Dynorbital-Spirit ROS (Non-Vac) " Dynorbital-Spirit ROS (Basic-Vac) " Dynorbital-Spirit ROS (Central Vac-Ready) " Dynorbital-Spirit ROS (Non-Vac) " Dynorbital-Spirit ROS (Basic-Vac) " Dynorbital-Spirit ROS (Central Vac-Ready) " Dynorbital-Spirit ROS (Non-Vac) " Dynorbital-Spirit ROS (Basic-Vac) " Dynorbital-Spirit ROS (Central Vac-Ready) /2" Dynorbital-Spirit ROS (Non-Vac) /2" Dynorbital-Spirit ROS (Basic-Vac) /2" Dynorbital-Spirit ROS (Central Vac-Ready) " Dynorbital-Spirit ROS (Non-Vac) " Dynorbital-Spirit ROS (Basic-Vac) " Dynorbital-Spirit ROS (Central Vac-Ready) " Dynorbital-Spirit ROS (Non-Vac) " Dynorbital-Spirit ROS (Basic-Vac) " Dynorbital-Spirit ROS (Central Vac-Ready) " Dynorbital-Spirit ROS w/54327 Pad (Non-Vac) " Dynorbital-Spirit ROS w/54327 Pad (Non-Vac) " Dynorbital-Spirit ROS w/54327 Pad (Non-Vac) " Dynorbital-Spirit ROS w/54328 Pad (Central Vac-Ready) " Dynorbital-Spirit ROS w/54328 Pad (Central Vac-Ready) " Dynorbital-Spirit ROS w/54328 Pad (Central Vac-Ready) Electric Dynafile II Electric Dynafile II Versatility Kit Electric 4" Disc Sander, Right Angle, 12,000 RPM Electric 4-1/2" Depressed Center Wheel Grinder, Right Angle, 12,000 RPM /2" - 5" Disc Sander 8,000 RPM.7 Hp Pistol Grip Rear Exhaust /2" - 5" Disc Sander 11,000 RPM.7 Hp Pistol Grip Rear Exhaust " Disc Sander 11,000 RPM.7 Hp Pistol Grip Rear Exhaust " 3,200 RPM.3 Hp 7 Buffer " 5,000 RPM.3 Hp 7 Buffer " 3,200 RPM.3 Hp 7 Buffer Die Grinder 18,000 RPM.33 Hp Right Angle Rear Exhaust Die Grinder 25,000 RPM.4 Hp 7 Right Angle Rear Exhaust Die Grinder 30,000 RPM.4 Hp 7 Right Angle Rear Exhaust " Dia.,.5 Hp 7 Right Angle Cut-Off Front Exhaust " Disc Sander 25,000 RPM.4 Hp 7 Rear Exhaust " Disc Sander 18,000 RPM.33 Hp Right Angle Rear Exhaust " Buffer 3,200 RPM.4 Hp Right Angle Rear Exhaust " Buffer Kit 3,200 RPM.4 Hp Right Angle Rear Exhaust " Dynabuffer Electric 5" Dynorbital Supreme ROS (Non-Vac) Electric 6" Dynorbital Supreme ROS (Non-Vac) Electric 5" Dynorbital Supreme ROS (Central Vac-Ready) Electric 6" Dynorbital Supreme ROS (Central Vac-Ready)... 25

50 50

51 51

52 For More Information, Prices or a Demonstration, Contact Your Local Dynabrade Jobber or Call/Fax One of Our Customer Service Information Numbers: USA: Telephone: 1-800/ Fax: 716/ Canada: Telephone: 1-800/ Fax: 716/ (Canada/International) Try Our New Toll-Free Consumer Information Number (USA/Canada): DYNABRADE autoaft@dynabrade.com DISTRIBUTED BY: DYNABRADE, INC., 8989 Sheridan Drive Clarence, New York Phone: (716) Fax: DYNABRADE, INC PRINTED IN U.S.A.

Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital...

Palm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital... Dynorbital-Spirit...46 HiVac Dynorbital-Spirit...48 Mesh Abrasive Systems...49 Dynorbital Supreme...50 Two-Hand Dynorbital...52 11" Dia. Dynorbital...53 Palm-Style Mini-Orbital...54 7 Offset Mini-Orbital...55

More information

Dynabuffer...82 Two-Step Repair System " Dia. Buffers "-8" Buffers...87

Dynabuffer...82 Two-Step Repair System  Dia. Buffers -8 Buffers...87 Dynabuffer...82 Two-Step Repair System...83 3" Dia. Buffers...84 5"-8" Buffers...87 6"-8" Buffers...88 Straight-Line Buffer...89 Electric Buffer...89 Random Orbital Polishers/Head Kit...90 82 Dynabuffer

More information

Reorder No. EUR07.07

Reorder No. EUR07.07 Reorder No. EUR07.07 The Dynabrade Difference Quality Inside and Out Dynabrade Full Two-Year Warranty Following the reasonable assumption that any inherent defect which might prevail in a product will

More information

INDUSTRIAL POWER TOOLS

INDUSTRIAL POWER TOOLS Reorder No. D10.10 INDUSTRIAL POWER TOOLS Continued Leadership In Portable Abrasive Power Tool Technology www.dynabrade.com INTRODUCTION Who We Are Since 1969, Dynabrade has earned a reputation of excellence

More information

Reorder No. EUR11.12

Reorder No. EUR11.12 Reorder No. EUR11.12 CATALOGUE & PRICE LIST FOR DISTRIBUTORS REFINISH SOLUTIONS AUTOMOTIVE AFTERMARKET 2016 RESHAPING YOUR WORLD WITH WORLDWIDE MARKET LEADERSHIP WORLD CLASS PRODUCT INNOVATIONS CUTTING

More information

Portable Air Tools for the Value-Minded Professional

Portable Air Tools for the Value-Minded Professional Reorder No. D05.09 Red Portable Air Tools for the Value-Minded Professional Includes Abrasive Belt Tools, Die Grinders, Disc Sanders, Buffers and More DynaZip Air Tools (See Page 2) 18255 DynaZip Air Tool

More information

Accessories Intro.qxd:Layout 1 9/27/06 5:50 PM Page 1

Accessories Intro.qxd:Layout 1 9/27/06 5:50 PM Page 1 Accessories Intro.qxd:Layout 1 9/27/06 5:50 PM Page 1 Air Supply Accessories...160 Arbors...186 Carbide Burrs and Carbide Burr Kits...189 Collets and Inserts...190 Contact Wheels and Assemblies...196 Couplers,

More information

Dynabrade Vacuum Tools and Accessories

Dynabrade Vacuum Tools and Accessories Dynabrade Vacuum Tools and Accessories Breathe Easy and Work Safe with Dynabrade Reorder No. D12.16 Dynabrade Vacuum Tools... Dynabrade s complete line of Vacuum Tools and Accessories efficiently capture

More information

RANDOM ORBITAL SANDERS

RANDOM ORBITAL SANDERS RANDOM ORBITAL SANDERS Dynorbital Supreme...148 Wet Dynorbital Supreme...150 Dynorbital Silver Supreme...152 Dynorbital-Spirit...154 HiVac Dynorbital-Spirit...156 Swirl-Free Checklist...157 Two-Hand Dynorbital...157

More information

Two-Hand Tool Series from Dynabrade

Two-Hand Tool Series from Dynabrade Two-Hand Tool Series from Dynabrade Random Orbital, Gear-Driven and Dual Action Sanders Reorder No. D04.05 Efficient Pneumatic Motor Offers Increased Power Advanced Design Allows Optimum Comfort and Control

More information

.4 hp Die Grinders & Disc Sanders

.4 hp Die Grinders & Disc Sanders .4 hp Die Grinders & Disc Sanders NEW Lightweight Ergonomic Design! Reorder No. D12.14 Ideal for Rapid Material Removal, Sanding, Deburring, Finishing Right Angle, 7 Offset & Angle-Head s Plus Angle-Head

More information

Two-Step System for Clear Coat Repair

Two-Step System for Clear Coat Repair Two-Step System for Clear Coat Repair With Buffing Time REDUCED by up to 40%! Reorder No. D10.09 NEW Random Orbital Sander and Dynabuffer with Exciting Innovations Proven Method for Repairing Surface Defects

More information

3,200 RPM Angle-Head WARNING

3,200 RPM Angle-Head WARNING Model: 50046 Angle-Head Kit 54002 Mini-Dynorbital Sander 54003 Mini-Dynorbital Sander 50223 2" Disc Sander 51091 Die Grinder 53026 Drill 50047 3" Buffer 50070 Finesse Sanding Kit Parts Page Reorder No.

More information

Dynorbital Supreme II Update Notice

Dynorbital Supreme II Update Notice For Use With All: Dynorbital Supreme II Models Parts Page Reorder No. PD01 67 Effective July, 2001 Dynorbital Supreme II Update Notice Balancer Shaft Revision OLD Configuration NEW Configuration 1 2 A

More information

CCESSORIES OOL A AIR T 222

CCESSORIES OOL A AIR T 222 AIR TOOL ACCESSORIES AIR TOOL ACCESSORIES Air Line Assemblies - Flexible, Swivel-Style...226 Air Line Assemblies - Lightweight...225 Air Line Fittings...227 Air Motor Tune-Up Kits...267 Arbors, Accessories...248

More information

Sanders, Buffers & Polishers Introduction

Sanders, Buffers & Polishers Introduction Sanders, Buffers & Polishers Introduction Dotco sanders, buffers and polishers are available in a variety of styles and power ratings to provide flexibility in choosing the best tool for the job. Disc

More information

95979 Pin Lever O-Ring (2) Valve Stem Speed Regulator or Recessed Speed Regulator

95979 Pin Lever O-Ring (2) Valve Stem Speed Regulator or Recessed Speed Regulator Models: 57000-3-1/2" Non-Vacuum 57023-5" Vac-Ready w/overskirt 57001-3-1/2" Basic Vacuum 57024-5" Central Vac-Ready w/overskirt 57002-3-1/2" Deluxe Vacuum 57026-6" Non-Vacuum 57003-3-1/2" Vac-Ready 57027-6"

More information

WARNING. Air-Powered, 2,400 RPM. AUTOMOTIVE Parts Page Reorder No. APD01 06 Effective April, 2001 Supercedes APD97 02 Palm-Style Buffer/Sander

WARNING. Air-Powered, 2,400 RPM. AUTOMOTIVE Parts Page Reorder No. APD01 06 Effective April, 2001 Supercedes APD97 02 Palm-Style Buffer/Sander Models: 090 Buffer 09 Mini Orbital Sander 09 Versatility Kit 09 4"-5" Buffer AUOMOIVE Parts Page Reorder No. APD0 06 Effective April, 00 Supercedes APD97 0 Palm-Style Buffer/Sander Air-Powered,,400 RPM!

More information

Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16

Dynafile...8 Dynafile II hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile...8 Dynafile II...11.4 hp Dynafile II...12 Vacuum Dynafile II...13 Electric Dynafile II...13 Mini-Dynafile II...16 Dynafile III...18 Dynabelter...22 Dynangle...25 Dynangle II...26 Take-About Sander...27

More information

Model. Reach into areas as small as 3/8". Model. Max. Air Flow SCFM (L/Min)

Model. Reach into areas as small as 3/8. Model. Max. Air Flow SCFM (L/Min) The Dynafile Original The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and

More information

Vacuum Models Central Vacuum Pencil Grinder hp Vacuum Die Grinders hp Vacuum Die Grinders hp Vacuum Die Grinders...

Vacuum Models Central Vacuum Pencil Grinder hp Vacuum Die Grinders hp Vacuum Die Grinders hp Vacuum Die Grinders... Non-Vacuum s Pencil Grinders...47 Quick-Change Pencil Grinder...49.4 hp Die Grinders...52.5 hp Die Grinders...59.55 hp Die Grinder...62.7 hp Die Grinders...63 1 hp Die Grinders...67 Vacuum s Central Vacuum

More information

ABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495)

ABRASIVE BELT TOOLS. APTOOL.RU Phone: +7 (495) ABRASIVE BELT TOOLS APTOOL.RU Phone: +7 (495) 723-19-55 ABRASIVE BELT TOOLS The Dynafile Original Air-Powered Abrasive Belt Tool The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts

More information

AIR SANDERS & POLISHERS

AIR SANDERS & POLISHERS AIR SANDERS & POLISHERS The most complete line of air finishing tools. Ingersoll Rand finishing tools are designed for long-life and swirl-free finishes. 49 4151-HL High Performance 150 mm Random Orbital

More information

Electric Portable Dry Vacuums

Electric Portable Dry Vacuums Electric Portable Dry Vacuums For use with air tools setup for two-tool operation. A cost-effective solution versus overhead central-vac systems. Quiet operation only 76 db(a). Variable Vacuum Control

More information

Pencil Grinders hp, 0.4 hp Die Grinders hp Die Grinders hp Die Grinders...101

Pencil Grinders hp, 0.4 hp Die Grinders hp Die Grinders hp Die Grinders...101 Pencil Grinders...92 0.33 hp, 0.4 hp Die Grinders...95 0.4 hp Die Grinders...96 0.5 hp Die Grinders...101 0.55 hp Die Grinder...104 0.7 hp Die Grinders...105 1.0 hp Die Grinders...107 92 Pencil Grinders

More information

Dynaswivel. Air Line Connectors. Ball-Swivel Plug. Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM THE SOLUTION

Dynaswivel. Air Line Connectors. Ball-Swivel Plug. Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM THE SOLUTION Dynaswivel Air Connectors Never Fight an Air Tool Again! For Use with Most Air Tools THE PROBLEM Aluminum and Stainless Steel Construction Single Pivot Right angle single-pivot swivels 360 at one location.

More information

Dynabrade Portable Abrasive Belt Tools

Dynabrade Portable Abrasive Belt Tools Dynabrade Portable Abrasive Belt Tools Grind, Deburr, Blend, Clean, Polish and Finish Reorder No. D08.02R We offer a diverse line of products to help you get the job done. With expert knowledge, service

More information

WARNING DYNABRADE. Air Powered Abrasive Belt Machine

WARNING DYNABRADE. Air Powered Abrasive Belt Machine For Serial No.9I1001 and Higher Parts Page Reorder No. PD00 50 Effective June, 2000 Supercedes PD96 16 66402 Tool Post Grinder Instruction Manual Air Powered Abrasive Belt Machine! WARNING Always operate,

More information

Supplying the Aerospace, Defense & Metal Working Industries Since 1951!

Supplying the Aerospace, Defense & Metal Working Industries Since 1951! Toll Free US & Canada: 800-645-8180 Eastern Division 60 Fleetwood Ct., Ronkonkoma, NY 11779-6907 Telephone: (631) 471-3300 Fax: (631) 471-3308 Western Division 1219 W. Mahalo Place, Rancho Dominguez, CA

More information

Models: Standard Machine, NWN Machine Screw Guide Screw Screw Button Screw Support Rod

Models: Standard Machine, NWN Machine Screw Guide Screw Screw Button Screw Support Rod Effective Serial Number Reference Table Model Number Serial Number 40320, 40321 36300 40326 1284 40330 3001 40335 1129 Models: 40320 Standard Machine 40326 20-1/2" Long Belt Machine 40330 Vacuum Machine

More information

3M Power Tools, Abrasives and Accessories. 3M Power Tools. Abrasives Tools from the Abrasives Experts

3M Power Tools, Abrasives and Accessories. 3M Power Tools. Abrasives Tools from the Abrasives Experts 3M Power Tools, Abrasives and Accessories 3M Power Tools Abrasives Tools from the Abrasives Experts 3M Power Tool Warranty Warranty and Limited Remedy: 3M warrants this tool against defects in workmanship

More information

FINISHING. Finishing Index. Sanders Polishers Finishing Accessories

FINISHING. Finishing Index. Sanders Polishers Finishing Accessories Finishing Index Sanders................... 33-34 Polishers...................... 34 Finishing Accessories........ 35-38 ACCESSORIES SPECIALTY PERCUSSIVE FINISHING ABRASIVE ASSEMBLY DRILLS The Best Way

More information

Angle & Vertical Grinders

Angle & Vertical Grinders Angle & Vertical Grinders Lightweight aluminium housing to help reduce operator fatique. Designed to handle a variety of applications from fine deburring to heavy grinding. Equipped for Type 27 depressed

More information

Dynabelter WARNING. Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD Models: Standard Duty/Finisher

Dynabelter WARNING. Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD Models: Standard Duty/Finisher Parts Page Reorder No. PD01 05 Effective January, 2001 Supersedes PD94 53 Models: 11462 Standard Duty/Finisher Dynabelter 11475 Standard Duty 11476 Heavy Duty 1" Wide Abrasive Belt Capacity! WARNING 1

More information

Supplying the Aerospace, Defense & Metal Working Industries Since 1951!

Supplying the Aerospace, Defense & Metal Working Industries Since 1951! Toll Free US & Canada: 800-645-8180 Eastern Division 60 Fleetwood Ct., Ronkonkoma, NY 11779-6907 Telephone: (631) 471-3300 Fax: (631) 471-3308 Western Division 1219 W. Mahalo Place, Rancho Dominguez, CA

More information

KEY. Oil. Grease. Loctite/Hernon: L 2 = Hernon #940. Torque: N m x 8.85 = In. - lbs. T 2 = 17 N m, T 3 = 23 N m Threaded Insert

KEY. Oil. Grease. Loctite/Hernon: L 2 = Hernon #940. Torque: N m x 8.85 = In. - lbs. T 2 = 17 N m, T 3 = 23 N m Threaded Insert Model: 11000 11001 Versatility Kit 11003 w/benchmount O L T Oil KEY G Grease Loctite/Hernon: L 2 = Hernon #940 Torque: N m x 8.85 = In. - lbs. T 2 = 17 N m, T 3 = 23 N m Parts Page Reorder No. PD97 01

More information

Sanders & Polishers. Sanders & Polishers

Sanders & Polishers. Sanders & Polishers 35 Non-Vacuum (NV) Self Vacuum (SV) Central Vacuum (CV) Select the right random orbital for your applications MODEL PAD SIZE ORBIT PAD TYPE 2 Handed in. mm in. mm Non- Vacuum (NV) CP7225-3 3 75 3/32 2.5

More information

New products at a glance

New products at a glance PROFESSIONAL CATALOG ADDENDUM New products at a glance 2015 NEW PRODUCTS M305 ULTRA FINISHING DURABLE GLAZE M30516 16 oz. M30564 64 oz. VSLM305 Secondary Label Fast wipe on, wipe off Silicone-free high

More information

3M Industrial Paint Preparation and Finishing Solutions. Redefining. Finish. the. Line

3M Industrial Paint Preparation and Finishing Solutions. Redefining. Finish. the. Line 3M Industrial Paint Preparation and Finishing Solutions the Redefining Finish Line Choose 3M products for consistent quality results. Paint Preparation Abrasives...3 5 Tools... 5 Accessories...5 7 Paint

More information

Features and Specifications for Impact Wrenches

Features and Specifications for Impact Wrenches Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN

More information

New products at a glance

New products at a glance PROFESSIONAL CATALOG ADDENDUM New products at a glance MEGUIAR S PROFESSIONAL CATALOG ADDENDUM 2015 NEW PRODUCTS M305 ULTRA FINISHING DURABLE GLAZE Fast wipe on, wipe off Silicone-free high gloss finish

More information

For Serial No. 2Axxxx and Higher For Type A Tools Serial No. xxxxxxa and Higher

For Serial No. 2Axxxx and Higher For Type A Tools Serial No. xxxxxxa and Higher 60,000 RPM Models: Model 51700 (1/8" Collet) Model 51701 (3mm Collet) Model 51702 (3/32" Collet) Model 51770 (1/16" Collet) 50,000 RPM Models: Model 51703 (1/8" Collet) Model 51704 (3mm Collet) Model 51705

More information

DYNABRADE.COM. Reorder No. D12.01

DYNABRADE.COM. Reorder No. D12.01 DYNABRADE.COM Reorder No. D12.01 Abrasive Belt & Finishing Tools Abrasive Belt Tools Dynafile...10 Dynafile II...13.4 hp Dynafile II...14 Vacuum Dynafile II...15 Electric Dynafile II...15 Mini-Dynafile

More information

Application Guide DISTRIBUTED BY:

Application Guide DISTRIBUTED BY: DISTRIBUTED BY: Application Guide Meguiar s International Headquarters: Suite 6-7, 20/F Marina House, 68 Hing Man Street, Shaukeiwan, Hong Kong Phone: 852-2967-0202 Fax: 852-2967-6968 MV-81 MV-82 MV-83

More information

TABLE OF CONTENTS PAGE NO. PAGE NO. GRINDERS & CUT-OFF TOOLS 3/8 IMPACT WRENCHES 1/2 IMPACT WRENCHES DRILLS HAMMERS 3/4 IMPACT WRENCHES

TABLE OF CONTENTS PAGE NO. PAGE NO. GRINDERS & CUT-OFF TOOLS 3/8 IMPACT WRENCHES 1/2 IMPACT WRENCHES DRILLS HAMMERS 3/4 IMPACT WRENCHES The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while

More information

67 YEARS OF AMERICAN INGENUITY

67 YEARS OF AMERICAN INGENUITY March 2018 67 YEARS OF AMERICAN INGENUITY Ultra Light Weight/ Orbital Sanding 3 GENERATIONS & COUNTING Ultra Light Weight Sanding Industrial Light Weight / Low Proole Sanding Random Orbital Water Sanding

More information

Effective January, 2000 Supercedes PD95 54 Models: 3 = Loctite #242, A 9 = Loctite #587. Models: Standard Machine, NWN Machine 16 A 9

Effective January, 2000 Supercedes PD95 54 Models: 3 = Loctite #242, A 9 = Loctite #587. Models: Standard Machine, NWN Machine 16 A 9 For Serial No. 9K2915 and Higher Parts Page Reorder No. PD00 05 O Oil: O 1 = Air Lube KEY Effective January, 2000 Supercedes PD95 54 Models: G Grease: = Loctite #771 40320 Standard Machine A Adhesive:

More information

Dynabrade Vacuum Cut-Off Wheel Tools

Dynabrade Vacuum Cut-Off Wheel Tools Dynabrade Vacuum Cut-Off Wheel Tools Efficiently Capture Dust and Debris While Cutting Reorder No. D07.12 Ideal for Effective Cutting through Fiberglass, Composites, More Vacuum Shroud Diverts Dust and

More information

15003, Tool Assembly. Note: Shaded parts represent Housing Assembly Vacuum Tool Assembly

15003, Tool Assembly. Note: Shaded parts represent Housing Assembly Vacuum Tool Assembly For Serial No. 1B1000 and Higher Parts Page Reorder No. PD01 29 Effective March, 2001 Supercedes PD97 64 Models: Mini-Dynafile II 15002 Vacuum ool 15003 Basic ool with Drive Wheel 15006 Versatility Kit

More information

Ergonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption

Ergonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption 3/8 Impact wrench The smallest in PCL s range of Prestige Impact Wrenches. The 3/8 Impact Wrench is designed for professional heavy duty use, with an ergonomically designed soft grip handle and a lightweight

More information

3M Power Tools, Abrasives and Accessories. Optimize. Performance. With The Perfect. System

3M Power Tools, Abrasives and Accessories. Optimize. Performance. With The Perfect. System 3M Power Tools, Abrasives and Accessories Optimize Performance With The Perfect System 3M Power Tools A full family of innovative tools to optimize your abrasive performance & maximize your comfort. n

More information

Accessory Items ACCESSORIES GRINDING

Accessory Items ACCESSORIES GRINDING Accessory Items The convenience of one stop shopping is provided through the selection of accessories offered by United Abrasives to complement and match our product offering. All of the accessories carried

More information

DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites

DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites DYNASTRAIGHT For Grinding, Cleaning and Polishing Works on Stainless Steel, Aluminum, Composites 950 RPM Model 13200.7 hp Model 13500 1 hp 13071 Combo Arbor for up to 3" wide wheels with a 5/8" or 1" dia.

More information

Air Tools. 1/4 Angle Die Grinder

Air Tools. 1/4 Angle Die Grinder Air Tools Everbrite Abrasive Pte Ltd Blk 5026, Ang Mo Kio Industrial Park 2, #01-91, Singapore 569529 Tel: 64847582 Fax: 64849570 hlp://everbriteabrasive.net email:enquiry@everbriteabrasive.net 1/4 Angle

More information

3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by:

3M Abrasive Systems Random Orbital Abrasive Disc Portfolio. Sanding & Finishing. Solutions. see inside. Distributed by: 3M Abrasive Systems Random Orbital Abrasive Disc Portfolio Sanding & Finishing Solutions! cs NsEivW e Dis Abra see inside Distributed by: The 3M Value The RIGHT Abrasives NEW Products NEW! Look for this

More information

Dynafile III. Tool Assembly. Parts Page Reorder No. PD05 16 Effective March, Models:

Dynafile III. Tool Assembly. Parts Page Reorder No. PD05 16 Effective March, Models: Parts Page Reorder No. PD05 16 Effective March, 2005 Models: Dynafile III 15400 Basic ool w/11206 Contact Arm 15401 Basic ool w/11287 Contact Arm Air Motor and Machine Parts Always operate, inspect and

More information

FLORIDA PNEUMATIC AIR TOOLS

FLORIDA PNEUMATIC AIR TOOLS North American Assembly & Testing, Distribution and Headquarters; and Worldwide Manufacturing Sources Florida Pneumatic: Quality We maintain complete control of the sub-supplier manufacturing process;

More information

MT07 MT03 MHS100AG MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MEASURING TAPES MEASURING TAPES HEAVY DUTY DELUXE TYPE HACKSAW W/12" H.S.S.

MT07 MT03 MHS100AG MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MEASURING TAPES MEASURING TAPES HEAVY DUTY DELUXE TYPE HACKSAW W/12 H.S.S. MEASURING TAPE & HACKSAW MEASURING TAPE & HACKSAW MT07 ITEM NO. MT03 MEASURING TAPES HIGH IMPACT ABS CASE W/ RUBBER PROTECTED RUBBER COVERED CASE, COMFORTABLE SIZE MEASURING TAPES INNER PC/BOX PACKING

More information

Slow Speed Dynafile II

Slow Speed Dynafile II For Serial No. 1D1000 and Higher Parts Page Reorder No. PD01 54 Effective June, 2001 Slow Speed Dynafile II Models: 40381 Slow Speed Dynafile II Air Motor and Machine Parts! WARNING Always operate, inspect

More information

High-Performance. ShineMateTM Auto Polishing Tool System. CATALOGUE Issue 6.1

High-Performance. ShineMateTM Auto Polishing Tool System. CATALOGUE Issue 6.1 High-Performance Auto Polishing Tool System ShineMateTM Auto Polishing Tool System CATALOGUE Issue 6.1 ShineMate, tools for polishing artist From bodyshops' refinishing process, to high gloss paint care

More information

3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs

3M Collision Repair Solutions. 3M Abrasives and Power Tools. Cutting & Grinding. for Body Techs 3M Collision Repair Solutions 3M Abrasives and Power Tools Cutting & Grinding for Body Techs 3M Disc Sander Ideal for general metal fabrication applications, including grinding, blending, weld leveling

More information

Machine Deals. The Complete 3M System: The Right Machine + The Right Abrasive + The Right Accessory = Outstanding Result

Machine Deals. The Complete 3M System: The Right Machine + The Right Abrasive + The Right Accessory = Outstanding Result Machine Deals. Industries that work with metal face many different demands but they all share the same needs to raise quality levels and reduce production times and costs whilst achieving demanding standards.

More information

Air Finishing Tools CP778. Heavy Duty Hi-Speed Sander

Air Finishing Tools CP778. Heavy Duty Hi-Speed Sander Air Finishing Tools Finishing work provides a wide range of challenges and we have a complete line of sanders, buffers and polishers for every application from heavy material removal to fine finishing.

More information

Optimize. Finishing Results. 3M Power Tools, Abrasives and Accessories. New The Right Tools The Right Accessories The Right Abrasives

Optimize. Finishing Results. 3M Power Tools, Abrasives and Accessories. New The Right Tools The Right Accessories The Right Abrasives 3M Power Tools, Abrasives and Accessories Optimize Finishing Results New The Right Tools The Right Accessories The Right Abrasives Air-Powered Orbital & Disc Pads, Tool Kits Stikit, Hookit, Hookit II,

More information

Finish Line. Redefining The. NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders

Finish Line. Redefining The. NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders NEW 3M Elite Series Air-Powered Random Orbital/Orbital Sanders NEW 3M Electric Random Orbital Sanders Redefining The Finish Line 3M Elite Series Sanders NEW Elite Series Air-Powered Sanders and NEW Electric

More information

Optimize. Finishing Results. 3M Power Tools, Abrasives and Accessories. New The Right Tools The Right Accessories The Right Abrasives

Optimize. Finishing Results. 3M Power Tools, Abrasives and Accessories. New The Right Tools The Right Accessories The Right Abrasives 3M Power Tools, s and Accessories Optimize Finishing Results New The Right Tools The Right Accessories The Right s Air-Powered Orbital & Disc Pads, Tool Kits Stikit,, Random Orbital Sanders & Sanding Tools

More information

PAGE NO. GRINDERS & CUT-OFF TOOLS PAGE NO. 3/8 IMPACT WRENCHES MODEL NO. DESCRIPTION

PAGE NO. GRINDERS & CUT-OFF TOOLS PAGE NO. 3/8 IMPACT WRENCHES MODEL NO. DESCRIPTION The AIRCAT line represents the most significant advances in the performance of pneumatic power tools in nearly 30 years. Founded in 1998, our tool line has a substantially reduced level of noise while

More information

Electric, Air and PBE Tools

Electric, Air and PBE Tools Electric, Air and PBE Tools www.ktoolinternational.com 1.800.762.6002 121 KTI-81550 Butterfly Impact Wrench KTI-81560 Pistol Grip Impact Wrench The popular Butterfly 3/8 drive with built-in power regulator

More information

Automotive Refinishing

Automotive Refinishing $9.95 USD Automotive Refinishing www.mirkacollision.us sanding v3.1 For over 30 years, Mirka Abrasives, Inc. has continually raised the performance bar through the development of innovative products and

More information

CONTENTS P4 P5-6 P7 P8-9 P10 P11 P12-13 P14-15 P16 P17 SPECIALTY LIFTS BOTTLE JACKS COMPACT SERVICE JACKS HEAVY DUTY SERVICE JACKS JACK STANDS

CONTENTS P4 P5-6 P7 P8-9 P10 P11 P12-13 P14-15 P16 P17 SPECIALTY LIFTS BOTTLE JACKS COMPACT SERVICE JACKS HEAVY DUTY SERVICE JACKS JACK STANDS CONTENTS P4 P5-6 P7 P8-9 BOTTLE JACKS COMPACT SERVICE JACKS HEAVY DUTY SERVICE JACKS SPECIALTY LIFTS P10 P11 P12-13 P14-15 JACK STANDS ENGINE CRANES & STANDS CREEPERS & SEATS SPECIALTY CREEPERS P16 P17

More information

POLISHER USER S GUIDE

POLISHER USER S GUIDE DUAL ACTION POLISHER USER S GUIDE Safety Notes Features INSTRUCTIONS Maintenance & Care DUAL ACTION POLISHER TABLE OF CONTENTS Features...2 Safety Notes...3 Basic Instructions...4 Maintenance & Care...6

More information

Industrial. Ready when you are. RediPower. Tools

Industrial. Ready when you are. RediPower. Tools RediPower Industrial Tools Ready when you are RediPower Ready when you are Available, cost effective, and durable are recognized attributes of the RediPower products. Since their introduction in the mid

More information

FINISHING SYSTEMS SILICONE-FREE POLISHING & COMPOUNDING PRODUCTS

FINISHING SYSTEMS SILICONE-FREE POLISHING & COMPOUNDING PRODUCTS FINISHING SYSTEMS SILICONE-FREE POLISHING & COMPOUNDING PRODUCTS PRODUCT DESCRIPTION DRX 1000 CUTTING COMPOUND DRX 1500 POLISHING COMPOUND FINISH GLAZE A673 A674 A675 DRX 3000 PROFESSIONAL FINISH ENHANCER

More information

POWER TOOL SOLUTIONS CALL TODAY TOLL FREE: Abrasive Tools

POWER TOOL SOLUTIONS CALL TODAY TOLL FREE: Abrasive Tools CATALOG 2018 www.eagle-group.com Abrasive Tools Impact Wrenches Drills TM POWER TOOL SOLUTIONS Eagle Group is a leading supplier of power tools for industrial markets. Whether you need tools for material

More information

WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS

WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7 & 9 GRINDERS AND SANDERS WE LISTEN. WE OBSERVE. WE OPTIMIZE. REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS REBEL 2.8 HP SERIES 7" & 9" GRINDERS AND SANDERS Rebel series grinders and sanders are powerful tools designed to overcome

More information

Dotco Drill Specifications

Dotco Drill Specifications Dotco Drill Specifications Speed Drill Diameter Type Weight Length Head Height Drill Chuck rpm (Capacity) (Housing) kg mm mm Size Air Inlet NPT Series 15LF straight - (300 Watt) 15LF081-38+ 5300 1/4" C

More information

FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND WARNING

FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND   WARNING Dynorbital Supreme Parts Page Reorder No. PD12 32 Effective November, 2012 Supersedes PD09 03 For Serial No. 12K1000B and Higher 12,000 RPM Air Powered Random Orbital Sander Air Tool Manual Safety, Operation

More information

3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions

3M Industrial Products. Abrasives and Power Tools for Welders. Welding Solutions 3M Industrial Products Abrasives and Power Tools for Welders Welding Solutions What s New for2011 3 4 1 2 5 6 1 2 3 3M Cubitron II Fibre Discs 987C The coolest way to increase productivity. If you work

More information

THE SANDERS THAT SET THE STANDARDS. AUTOMOTIVE REPAIR MARINE SOLID SURFACE WOODWORKING RESTORATION

THE SANDERS THAT SET THE STANDARDS.  AUTOMOTIVE REPAIR MARINE SOLID SURFACE WOODWORKING RESTORATION Made in the United States of America www.nationaldetroit.com AUTOMOTIVE REPAIR MARINE SOLID SURFACE WOODWORKING RESTORATION THE SANDERS THAT SET THE STANDARDS W W W. N A T I O N A L D E T R O I T. C O

More information

HP-100 Acrylic Kit Restoration

HP-100 Acrylic Kit Restoration HP-100 Acrylic Kit Restoration Guidelines for Acrylic Finishing: To avoid scratching the surface, do not wear watches, rings, or bracelets. Long fingernails should be covered with gloves. MICRO-MESH will

More information

Automotiveabrasiveproducts

Automotiveabrasiveproducts Automotiveabrasiveproducts ISO 9000 Commitment for Quality With more than 80 years of integrated manufacturing experience, FANDELI has been a major producer of high quality sandpaper serving automotive

More information

AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER

AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258

More information

3M Abrasive Systems. Metalworking Application Guide. Advanced Metalworking. with 3M support

3M Abrasive Systems. Metalworking Application Guide. Advanced Metalworking. with 3M support 3M Abrasive Systems Metalworking Application Guide Advanced Metalworking with 3M support 3 Product symbols MS Stainless Steel Mild Steel Aluminium Grinding Aid High Pressure Medium Pressure Alumina Zirconia

More information

HOW - TO SCRATCH & DENT REPAIRS

HOW - TO SCRATCH & DENT REPAIRS HOW - TO SCRATCH & DENT REPAIRS Tool And Material Checklist Wax and Grease Remover Sandpaper Assortment and Sanding Block Tack Cloth and Lint-free Cloths Glazing Putty Rubber Contour Squeegee Body Filler

More information

CATALOG #8716 CONSTRUCTION DISTRIBUTION MARKET FLOOR CARE PRODUCTS DIAMOND COATED NON-WOVEN ALL THE MUSCLE YOU NEED

CATALOG #8716 CONSTRUCTION DISTRIBUTION MARKET FLOOR CARE PRODUCTS DIAMOND COATED NON-WOVEN ALL THE MUSCLE YOU NEED CATALOG #8716 CONSTRUCTION DISTRIBUTION MARKET FLOOR CARE PRODUCTS DIAMOND COATED NON-WOVEN ALL THE MUSCLE YOU NEED COARSE FLOOR POLISHING PADS The coarse diamond maintenance pad is perfect for cleaning

More information

Made for Life GF-04W1. Air Tire Buffer. Air Angle Die Grinders 0.5HP (115 ) (18,000 rpm) Mini Air Die Grinders 0.3HP (25,000 rpm)

Made for Life GF-04W1. Air Tire Buffer. Air Angle Die Grinders 0.5HP (115 ) (18,000 rpm) Mini Air Die Grinders 0.3HP (25,000 rpm) Air Tire Buffer Spindle Thread 502653 3/8" Mini Air Die Grinders 0.3HP (25,000 rpm) Spindle Thread 125036 6mm 125032 1/4" Mini Air Angle Die Grinders 0.3HP (90 ) (20,000 rpm) 120036 6mm 120032 1/4" Air

More information

RESIN FIBER DISC PADS

RESIN FIBER DISC PADS RESIN FIBER DISC PADS SMOOTH FACE RFD PADS These pads are made from proprietary thermoplastic rubber compounds that provides consistent properties over a wide range of temperatures. They are ideal pads

More information

RF81 Finish Defects. Copyright 1999 Inter-Industry Conference On Auto Collision Repair v.4.0

RF81 Finish Defects. Copyright 1999 Inter-Industry Conference On Auto Collision Repair v.4.0 Uniform Procedures For Collision Repair UPCR RF81 Finish Defects Copyright 1999 Inter-Industry Conference On Auto Collision Repair v.4.0 1. Description This procedure describes methods for correcting finish

More information

FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND WARNING

FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND  WARNING Dynorbital-Spirit Parts Page Reorder No. PD09 01 Effective February, 2009 Supersedes PD07 07 For Serial No. 09B1000G and Higher 12,000 RPM Air Powered Random Orbital Sander Air Tool Manual Safety, Operation

More information

3M Automotive Aftermarket 3M Paint Finishing Solutions.

3M Automotive Aftermarket 3M Paint Finishing Solutions. 3M Automotive Aftermarket 3M Paint Finishing Solutions. Saving you time on the path to the perfect finish. Achieve a perfect finish with 3M s best finishing systems. 3M Trizact Abrasives 3M Trizact Abrasives

More information

GET WIRED FOR SUCCESS WITH NEW NORTON WIRE BRUSHES

GET WIRED FOR SUCCESS WITH NEW NORTON WIRE BRUSHES GET D FOR SUCCESS WITH NEW BRUSHES When you need the perfect low-impact solution for refining surfaces without removing any base material, try our new line of Norton wire brushes. This new, economically

More information

FAST CORRECTING CREAM CORRECTING CREAM PERFECTING CREAM FINISHING SEALANT

FAST CORRECTING CREAM CORRECTING CREAM PERFECTING CREAM FINISHING SEALANT CORRECTING REMOVING MODERATE TO SEVERE DEFECTS MOST AGGRESSIVE PERFECTING REFINING & ENHANCING GLOSS PROTECTING PERFECTING & PROTECTING LEAST AGGRESSIVE FAST CORRECTING CREAM CORRECTING CREAM PERFECTING

More information

Vacuum Ready Tools. 3" Pneumatic Vacuum Ready Orbital Sanders

Vacuum Ready Tools. 3 Pneumatic Vacuum Ready Orbital Sanders Vacuum Ready Tools ORBITS & TYPICAL APPLICATIONS 5/16" Orbit: Most Agressive Sanding Pattern Body Area Low Grits (ie: 60-120gr) 3/16" Orbit: Agressive Sanding Pattern Body Area Low Grits (ie: 60-120gr)

More information

Air Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL WARNING

Air Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL WARNING Router.7 Hp/Straight-Line/Front Exhaust Air Tool Manual Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL PartsPage Reorder No. PD03 12R Effective, 20 Supersedes PD03.12 Models:

More information

Mini Tools. Less is more.

Mini Tools. Less is more. Mini Tools Less is more. THE PERFECT COMBINATION OF PERFORMANCE AND CONVENIENCE IN THE PALM OF YOUR HAND Do more with less. The Ingersoll Rand family of mini air tools perfectly complements our existing

More information

SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE

SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE SIOUX TOOLS FORCE PRODUCT CATALOG ABRASIVE Abrasive Index Straight Die Grinders......................... 25 Right Angle Die Grinders...................... 26 23 SIOUX TOOLS FORCE PRODUCT CATALOG Make Easy

More information

Mighty Seven Pneumatic Air Tools and Accessories 2018 New Tools Complete Air Tool Solutions

Mighty Seven Pneumatic Air Tools and Accessories 2018 New Tools Complete Air Tool Solutions Mighty Seven Pneumatic Tools and Accessories 2018 New Tools Complete Tool Solutions NC 4612B 1/2 Dr. Impact Wrench Square Drive Bolt Capacity Max. Torque Pressure Net Weight Hose Overall Length 1/2 5/8

More information

MICHIGAN PNEUMATIC TOOL

MICHIGAN PNEUMATIC TOOL MICHIGAN PNEUMATIC TOOL Industrial Air Tools Grinders 2016 Serving All Industries Petro Chemical Aircraft Assembly Foundry Rental 1-800-521-8104 www.michiganpneumatic.com MATERIAL REMOVAL Right Angle Grinders

More information

DRILLS. Parts Interchangeability. Precision Parts. Ultimate Ergonomics

DRILLS. Parts Interchangeability. Precision Parts. Ultimate Ergonomics DRILLS Dotco drills are used daily in applications ranging from aerospace to oil fields and refineries. Three styles are available - pistol grip, inline, and right angle models. in this section range from

More information

OEM APPROVED AND USED

OEM APPROVED AND USED OEM APPROVED AND USED Pro Form's Pliogrip Truck Line epoxy and urethane adhesives are part of a complete system designed for the most demanding bonding applications in the truck refinish industry. www.proformproducts.com

More information